Based on the brake characteristic of water-cooling disc brakes during going down, the FEM model of thermal analysis during cycle braking is established.
基于盘式刹车在下钻过程中的制动特性，建立了水冷式刹车盘下钻过程中循环制动的有限元分析模型。
Based on modal analysis of piezoelectric smart laminated plates, an FEM based inverse algorithm of the time history of impact loads by piezoelectric modal respondence is presented.
基于对智能层合板结构的模态分析，提出由结构的压电模态响应反演瞬态荷载时间历程的有限元方法。
Combining the actual project example, non-linear FEM is used for a stability analysis of high slope and a way of judging the slope stability is put forward for reference.
结合工程实例用非线性有限单元法对高边坡进行稳定分析，并提出判断边坡稳定的方法，以供参考。
The time-stepping FEM model for the dynamic analysis of power system is established considering the nonlinear characteristics of internal generators and typology structures of external circuit.
建立了既考虑发电机内部非线性又考虑外部电路拓扑结构的用于系统动态分析的时步有限元模型。
The analysis of a bus chassis frame by FEM is now becoming an essential technique to design bus structure.
在汽车结构设计中，有限元分析法已经成为必备的技术手段。
Based on the field loading tests and FEM numerical simulation analysis, the paper probes into the potential bearing capacity of large diameter and super-long bored-cast-place piles.
基于入和没入硬层时有限元数值模拟对比分析和持力层不同时同场地现场对比试验资料分析，对大直径超长灌注桩的承载潜力问题进行了探讨。
This text made FEM calculation and analysis for rotor disk of heavy blower in a plant, and found that the disk can be reused safely again after the arc grooves along outside of blade being repaired.
对某发电厂大型鼓风机转子轮盘强度进行了有限元计算与分析，确认了转子轮盘在出现沿叶片外弧的弧形沟槽后，略加修复仍可安全使用。
The Curved Surface Mesh Generation is one of important premise for the FEM analysis and computation.
曲面网格自动生成是有限元分析和计算的一个重要前提。
This paper is focused on the analysis of three nozzles with different entrance shrinking Angle with FEM method.
文中运用有限元法对三种不同入口收缩角的喷嘴进行了分析。
An effective vector finite element method (FEM) for analysis of 3d radiation problem is proposed.
提出了一种用于3 -D电磁辐射特性分析的快速有限元方法。
Finally, the present method is applied to the modal identification from the I/O data of FEM dynamic analysis and on board measurement for a container ship.
最后以一货柜轮之有限元素动态分析模拟与实船量测结果为例进行船体整体振动之态特性识别。
Static analysis via FEM is studied, and the optimum scheme of actuator array for an active mirror with maximum corrective capability is achieved.
用有限元法（FEM）进行了静力学分析和计算，从而给出具有最佳校正能力的作动器分布的优化方案。
Based on the modal analysis of piezoelectric laminated plates, a FEM based inverse algorithm is presented for the time history of impact loads by piezoelectric modal response.
基于对智能层合板结构的模态分析，提出由结构的压电模态响应反演瞬态荷载时间历程的有限元方法。
Applying the theory of curved beam FEM, a practical method of structure analysis of curved bridge is build when considering the sidelong support.
应用曲杆有限单元法建立曲线梁桥的实用分析方法，并考虑了曲线梁桥的非径向支承特征。
With the dynamic optimum analysis of the frame FEM model, a control technique of the lateral vibration is introduced.
通过对车架有限元模型进行动力优化分析，介绍了轻型货车横向振动的控制方法。
In recent years, with the fast development of computer technology, the Finite Element Method (FEM) has become one of the most powerful analysis tools available in solving complex engineering problems.
近年来，随着计算机技术的飞速发展，有限元方法已经成为复杂工程问题求解中最强大的数值分析方法之一。
Kinematic hardening model was used in FEM analysis and the response behaviors of transient local stress strain for material was also considered.
有限元分析采用了随动强化模型，并考虑材料瞬态局部应力应变的响应特性。
FEM analysis of a kind BRB applicable to space structures was conducted by using software ANSYS. The hysteresis curve of the BRB was obtained.
利用ANSYS程序对一种适用于网壳结构的屈曲约束支撑进行有限元分析，得到支撑的滞回曲线。
The analysis results meet with the bench test result very well, which verified the possibility of the FEM analysis method, and provide a direction ibr the research to optimization of structure.
将分析结果与台架试验结果进行对比，验证了有限元分析方法的可行性，为今后的结构优化研究提供了方向。
In this paper the basic theory of temperature field analysis and the solution method of FEM (Finite Element method) are introduced.
讨论了温度场分析的基本原理以及有限元解法。
The element analysis of segment circuits and field coupled FEM is studied.
研究了分时段电路与磁场方程耦合时有限元单元分析的处理方法。
By using ANN and its powerful nonlinear mapping ability and combining production of FEM dynamic analysis, a new way to predicting terrane crack depth of complex fire hole is offered.
以神经网络为基本工具，利用其强大的非线性映射能力，并结合有限元法动力分析成果，为预测在复合射孔条件下岩层裂缝扩展深度提供了一条新的途径。
Basic theory of nonlinear FEM analysis and its realization in ANSYS were studied. Accomplish stability analysis of high arch dam abutment based on nonlinear FEM analysis.
因此对大型结构分析软件ANSYS的三维非线性计算功能进行了深入研究，在此基础上完成了基于非线性有限单元法的高拱坝坝肩稳定计算分析。
By use of general FEM software and the time-domain difference of ground resistance, the structure history analysis programs with consideration of soil-structure dynamic interaction was developed.
基于通用有限元软件和地基阻抗力时域差分形式，完成了考虑土–结构动力相互作用影响的结构时程分析程序二次开发。
Together with the FEM modal analysis of the car's roof panel and windscreen, an improved design is achieved to reduce the interior noise.
在结合声学试验分析和该车车顶棚、前风挡有限元模态分析的基础上，进行了针对降低车内噪声的改进设计。
The numerical analysis of finite element method (FEM) is an important means of modern engineering refined design, having become an indispensable engineering tool for designers.
有限元数值分析是现代工程精细设计的重要方法，已成为工程设计人员不可或缺的重要工具和手段。
First, using second constrain, the static state and dynamic analysis applied to the frame of a few thickness plates with FEM modal analysis, distortion, stress, vibration and frequency were gained.
首先在第二种约束方式下，利用有限元模态分析方法对几种不同板厚的机架进行了动、静态分析，得到了机架变形、应力及各阶振型与频率。
This paper made some research on the modeling of some city bus body, FEM static intensity analysis and structure optimization.
本文对某型大客车进行有限元静态分析，探讨客车车身建模、强度分析与结构优化。
FEM analysis and assembly method of a planar array antenna in radar of bigger size and better mobility.
本文介绍了一种较大尺寸的平面阵列天线的机动型雷达的结构设计、有限元分析和总成方法。
FEM analysis and assembly method of a planar array antenna in radar of bigger size and better mobility.
本文介绍了一种较大尺寸的平面阵列天线的机动型雷达的结构设计、有限元分析和总成方法。
应用推荐