Coupling analysis method of finite element and infinite element is proposed to be used in the structural anti-seismic analysis of metro tunnel on the basis of soil-structure interaction theory.
在土体与结构动力相互作用理论的基础上，提出用有限元和无限元耦合分析法对地铁隧道结构进行抗震分析。
Slice method and finite element method are principal methods of soil slope stability analysis.
条分法和有限元法是土质边坡稳定分析的主要方法。
The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.
分析结果显示，将基于有限元分析的优化技术应用于非标零件的设计是一种非常可行的方法。
Self adaptive finite element method has its important application value in the analysis of practical engineering problems.
自适应有限元方法在实际工程问题的分析中有重要的应用价值。
Conclusion Three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.
结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.
以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
The theoretical analysis and numerical experiments show that the multiscale finite element method presented in this paper is very effective to solve above these kinds of problems.
理论分析和数值实验均表明：多尺度数值方法对求解多孔复合介质周期结构的热传导和质扩散问题是可行的和有效的。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
By using multilevel substructure analysis and finite element displacement method, this system is suitable for various linear static analysis of aeronautical structures.
这一系统采用多级子结构分析技术，可以适应各种类型航空结构的线性静力分析。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
This paper deals with the necessary procedures and noticeable problems of the staged - calculation method in the structure finite element analysis.
本文讨论实现分阶段计算方法的具体措施和应该注意的问题。
And then obtained the modification model of sensor shell with sufficient accuracy by adopting the combined modeling method of experimental modality analysis and finite element modeling.
然后采用实验模态分析和有限元建模相结合的建模方法，获得了足够精度的传感器壳修正模型。
As a numeric analysis method, the finite element method has been becoming a more and more important action in analysis of gear transmission system.
有限元方法作为一个强有力的数值分析工具，在齿轮传动系统的分析中起到了越来越大的作用。
As an assistant tool of forming analysis, the finite element method can get rid of fussy experiments and come to conclusions that referred to real experiments directly.
有限元方法作为成形方法的辅助分析工具，可以简化繁琐的试验，以直观的方法得到对实际成形具有参考性的结论。
The result uniformity of theory and test illustrates the simulation analysis method with finite element can be used to evaluate the reinforcement effect of bridge well and truly.
理论分析与荷载试验结果的一致性表明采用有限元仿真分析方法能够对桥梁加固效果进行准确的评价。
This approach can improve modeling precision and efficiency of producing involute gear, and provide necessary condition for finite element method analysis of involute gear.
该方法可以提高渐开线齿轮造型精度与效率，从而为渐开线齿轮的有限元分析提供了必要条件。
Then the author combines the basic equation of impact dynamics with finite element method and establishes the analysis method of complex structures under impact load.
将冲击动力学的基本方程和有限元分析相结合，建立了复杂结构在冲击载荷作用下的分析方法。
This paper suggests a finite element analysis method of the multilayer pavement with materials of nonlinearity.
本文提出了一个考虑材料非线性的多层路面应力分析的有限单元法。
Abstract: the method of fast finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
文摘：研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法，并实现了计算程序。
This provides a foundation for the analysis of the stochastic seepage with stochastic finite element method.
为应用随机有限元方法对随机渗流进行分析提供了理论依据。
Researching into the force will provide the detailed and reliable basis for the analysis of finite element method and optimal design of strut member.
研究主轴电极头所受的液体阻力，为主轴支承件的有限元分析和优化设计提供详实可靠的理论依据。
Researching into the force will provide the detailed and reliable basis for the analysis of finite element method and optimal design of strut member.
研究主轴电极头所受的液体阻力，为主轴支承件的有限元分析和优化设计提供详实可靠的理论依据。
应用推荐