Using the infrared spectrum analysis and X-ray diffraction analysis and test method, scanning electron microscope, etc, to rare earth of synthesis of boric acid salt are analyzed and characterized.
采用红外光谱、X射线衍射分析测试方法、扫描电镜等，对所合成的稀土硼酸盐进行了分析和表征。
The four steps to this combination test method are: test selection, system resource utilization evaluation, kernel code coverage analysis, and final stress test evaluation.
这一组合测试方法的四个步骤是：测试选择、系统资源利用率评价、内核代码覆盖分析以及最终的压力测试评价。
Methods Suspension quantitative germicidal test and physicochemical analysis method were used to carry out laboratory observation.
方法用悬液定量杀菌试验和理化分析方法进行了实验室观察。
Responsible for implementing validation work about all kinds of analysis method within Lab, supply the test support on the other validation work such as process, equipment, environment and etc.
负责实验室内部各种检验分析方法的验证工作的实施，对生产工艺、设备、生产环境等验证工作提供检验支持。
Method Physicochemical analysis method and carrier quantitative germicidal test were used to carry out laboratory observation.
方法采用理化分析方法和载体定量杀菌试验方法进行了实验室观察。
The test results and its analysis show that the hypotheses of the models are correct and the test method is practical.
试验结果和分析表明，该模型的假设和有关理论是正确的，方法是可行的。
The amalgamation of SRS technique and real-time signal analysis technique gives birth to advanced shock test real-time control system and this system replaces quickly the common method and technique.
冲击响应谱分析技术与实时信号分析技术的融合，先进的冲击试验实时控制系统技术也随之产生并迅速取代普通冲击试验分析方法与试验技术。
By applying the harmonic analysis method to adjusting and compensating, the practical test data is acquired, and the inductosyn Angle measuring accuracy is, raised.
通过实测数据并用谐波分析的方法对两项误差进行补偿与调整，提高了感应同步器的测角精度。
A design method for low phase noise agile X-band frequency synthesizer is presented, the theoretic analysis and calculation is performed and the test results are given.
介绍一种低相噪、捷变频x波段频率综合器设计方法，并进行理论分析、计算，最后给出测试结果。
The experiment design and method of loose blasting funnels are introduced in this paper, and an analysis of the test results is carried out.
介绍了爆破漏斗的实验设计和实验方法，并对实验结果进行了分析。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
A software reliability testing method, judge standard and test process based on random testing model is introduced in the paper, and Monte Carlo method is used result analysis.
本文提出一种基于随机测试模型的软件可靠性测试方法、评判准则和测试策略，并利用蒙特卡罗方法进行了分析。
The test content, method, result analysis and the prediction of economic benefit are elaborated in details.
详细阐述了试验内容、方法、结果分析，并进行了经济效益预测。
The test analysis and calculation results further proved the exactness of the reliability calculation method and the stability of the roadbed slope in test section.
由试验分析和计算结果进一步验证了试验路基边坡的稳定性及可靠性计算方法的准确性。
The result uniformity of theory and test illustrates the simulation analysis method with finite element can be used to evaluate the reinforcement effect of bridge well and truly.
理论分析与荷载试验结果的一致性表明采用有限元仿真分析方法能够对桥梁加固效果进行准确的评价。
A comparative analysis is made on the main technical requirement and test method specified in the new standard concerning motorcycle rear mirror.
对摩托车后视镜新标准中关于摩托车后视镜失真率的主要技术要求和测试方法进行了对比分析；
The test technique and analysis method were further discussed.
进一步对试验技术及分析方法进行了讨论。
FEA (Finite Element Analysis) and test results have verified the effectiveness of this method.
有限元分析和实验测试结果证实了方法的有效性。
The vehicle emission test management and emission data analysis have become more important with the development of test method and technology in our country.
随着我国机动车排放检测方法和技术的不断完善，对检测工作管理及检测数据分析提出了越来越高的要求。
The fundamental principles of pulse thermal Infrared nondestructive test and the method of mathematic analysis are described.
介绍了脉冲加热红外无损检测的原理及其数学分析的方法。
On the basis of theoretical analysis and model test, the method and formula for estimating the seepage stability of dike foundation are provided.
在理论分析和模型试验的基础上，给出核算堤基渗流稳定的方法和公式。
The results show that it is a reliable and accurate test method and can be utilized for petroleum product analysis.
结果说明激光粒度分析是一种可靠和精确的试验方法，可用于油品的分析。
This paper introduces the principle, method and result analysis of performance test of brake used in shock testing system, and presents the estimation method of brake rigidity and specimen stroke.
介绍了冲击试验中制动器性能试验的原理、方法及结果分析，给出了制动器刚度及试件滑动行程等参数的估计方法。
Based on thermo-structural experiment, coupling of aeroheating analysis and thermal test, a new experimental control method is described.
阐述了将结构热试验和气动加热计算相结合，实现气动热分析与热试验相耦合的试验控制方法。
Modal measurement and analysis method of vehicle emission test were discussed.
研究了汽车工况法排放测试的模态试验方法及分析方法。
The reliability analysis is the effective method for examined the software test behavior's rationality and sufficiency.
可靠性分析的结果为检验软件测试行为的合理性与充分性提供了有效的依据。
The innovation design thought of oil water emulsion pump test station system is introduced and gives the design method with important design parameters and the relative test and analysis ideas.
介绍了乳化液泵试验台系统改造设计思想，给出了用重要设计参数的设计方法及相关试验分析研究思路。
For a few typical reciprocating compressors and pumps, the test and analysis are made, This method proved initially to be effective.
对几台典型的往复式空压机和离心泵进行了实测分析，初步证实了该方法的有效性。
The diesel engine is a complicated machine with many vibration sources, so the traditional vibration analysis and single parameter test method cannot determine the diagnosis accurately.
柴油机结构复杂，振源众多，常规的振动分析及单项指标测试对于故障的定位与诊断精确度不高。
The diesel engine is a complicated machine with many vibration sources, so the traditional vibration analysis and single parameter test method cannot determine the diagnosis accurately.
柴油机结构复杂，振源众多，常规的振动分析及单项指标测试对于故障的定位与诊断精确度不高。
应用推荐