Aluminum coating has good corrosion resistance.
铝镀层具备良好的抗腐蚀性能。
Aluminum coating on AZ91 magnesium alloy was deposited by arc spraying.
采用电弧喷涂技术在镁合金az91基材表面制备铝涂层。
The arc-spraying aluminum coating on iron substrate was treated by induction remelting.
利用高频感应重熔工艺对铁基电弧喷涂铝层进行处理。
A protecting aluminum coating on the magnesium alloy surface was obtained by electro-arc spraying.
本文叙述了表面技术——电弧热喷涂技术在材料防腐上的应用。
Corrosion behaviors of two kinds of common used coatings–bituminous epoxy coating and epoxy aluminum coating immersed in 3.
采用电化学方法研究了两种常用涂层—环氧沥青涂层和环氧铝粉涂层在3。
IR98 is a 100% silicone aluminum coating with high temperature resistance. Applied on prepared steel or zinc silicate shop primer.
硅酮铝涂料,耐高温,可以涂布于处理过的钢或无机硅酸锌漆表面。
By way of experiment, the new invention of aluminum coating was tried out on a smaller telescope disk belonging to the same observatory.
作为实验,新发明的涂铝工艺被试用于该天文台的另一架较小的望远镜的圆面上。
In this paper, conductive layer was made on the surface of composite ply, such as flame spraying aluminum coating, expanded aluminum foil, aluminum foil.
结合复合材料自身的弱导电性特点,通过在其表面增加导电功能层的方式解决复合材料的防雷击问题。
The zinc aluminum coating (also called "Dacromet") is a recently developed anticorrosive technology which has the advantages of high anticorrosion, low pollution and no hydrogen brittleness.
锌铝涂层(也叫达克罗涂层)是一种新兴的金属防腐涂覆技术。它具有高耐蚀、无污染、无氢脆等优点。
So cold zinc spraying coating corrosion resistance is better than that of spraying zinc (aluminum), hot galvanized and other zinc rich coatings.
所以冷喷锌涂料的防腐蚀性能优于喷锌(铝)、热镀锌及其他富锌涂料。
Aluminum was chosen for its minimalist connotations, and coating the top story only, emphasizes the lightness of structure and its differing masses.
因为其极简主义内涵得以选择铝作为材料,只包覆着顶层,强调结构的轻盈和不同体块。
Inspection and quality control are used to ensure that aluminum coil stock received by the coater is suitable for coating and meets the end customer's requirements.
检查和质量控制应用来保证卷铝厂得到铝卷合适于涂料和符合客户的要求。
Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.
外壳铝合金压铸成型,强度高,表面高压静电粉末喷涂,耐腐蚀。
The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated.
研究了铝合金消失模铸造过程中的涂料行为。
In order to improve the fluidity of hot dipping liquid at low temperature, avoid coating thickness, and improve the coating appearance, pure aluminum often participate in 0.01% ~ 0.02%.
为了提升在较低温度下热浸镀液的流动性,避免镀层过厚,并进步镀层外观,常常参加0.01% ~ 0.02%的纯铝。
The aluminum is in better shape, but salts in water pooling on its surface slowly eat little pits that leave a grainy white coating.
铝的形态要好些,但水中的盐分也在缓缓吞噬着它的表面,留下的是坑坑洼洼的白色表皮。
A coating or covering on a structure; such as stucco, wood, or aluminum siding.
结构的涂层或覆盖物;例如灰泥、木头或者铝板房屋外墙壁。
Several coating processes and selections thereof are introduced. Surface pretreatments of steel or iron components, aluminum or its alloy components and plastic components are discussed.
介绍了几种涂装工艺和涂装工艺的选择,讨论了钢铁件、铝及铝合金工件、塑料件的表面前处理工艺。
From two points, low emissivity coating of the aluminum and the ITO and phase change microcapsule as the decreased temperature were prepared.
从这两点出发,重点研究了低发射涂层铝粉、ITO粉和降温涂料相变微胶囊的制备。
Roller coating on aluminum coil and technical specifications of the coatings have been described. The reasons of common failures and improving measures in roller coating were discussed.
介绍了铝卷材辊涂工艺及涂层的质量性能指标,讨论了辊涂常见故障产生原因及排除方法。
Hence, the spot welding result of aluminum alloy with the coating mixture of mineral oil and BBC is better, and the electrode life of aluminum alloy spot welding is prolonged.
因而铝合金表面涂敷矿物油和BBC的混合物时,电极烧损程度较轻,电极使用寿命得到了延长。
Since the color coating process on the skin aluminum is to attach the paint on aluminum plate through continuous roller coating technique and finished in one time, so the color has super uniformity.
由于表面铝板的色泽涂层是通过连续式辊涂技术将面漆附着在铝板上面,并且是一次性完成,保证其色泽的一致性。
Zinc basic coating, prepared with flake zinc powder, aluminum powder, chromic anhydride and some other organic compounds, possessed good combination force and corrosion resistance.
利用片状锌粉、铝粉、铬酐及其它有机物配制的锌基涂料具有良好的结合力和耐蚀性。
The principles and processes of pretreatment before coating aluminum and aluminum alloy are introduced.
介绍了铝及铝合金的涂装前处理的原理和工艺。
Anodic electrophoretic mechanism of aluminum alloy profile and how to obtain suitable deposition amount of electrophoretic coating are introduced in the paper.
介绍了铝合金型材阳极电泳机理,以及如何获得合适的电沉积量。
Ceramic coating was obtained by micro arc oxidation on the substrate of casted aluminum silicon alloy.
用微弧氧化的方法在铸造铝-硅合金基体上获得陶瓷层。
The result of reflectivity to different store time coating is shown that the oxidation of aluminum has little effect to the ultraviolet reflectivity.
对不同存放时间铝膜的反射率进行测定的结果表明,铝膜的氧化对紫外反射率的影响很小。
Toxicity problem in manufacturing and storage might be alleviated by coating beryllium with aluminum.
但如果用铝包覆铍,则可避免加工过程中及储存期间的中毒问题。
The fatigue fracture mode of LY12CZ aluminum alloy specimen with coating is investigated under stress control condition.
在应力控制下,分析带有涂层的LY 12CZ铝合金构件疲劳断裂方式。
The fatigue fracture mode of LY12CZ aluminum alloy specimen with coating is investigated under stress control condition.
在应力控制下,分析带有涂层的LY 12CZ铝合金构件疲劳断裂方式。
应用推荐