This happens in an alloying process so gold is combined with palladium to create that 'white gold' effect.
这在合金的过程中发生，就像黄金和钯合金达到“白金”效果一样。
The paper deals with the reasons of producing defects and its control methods in laser cladding and laser surface alloying process.
论述了激光熔覆与合金化层缺陷的产生原因及其控制方法。
The principle, discharge mode and alloying process of double glow discharge plasma surface alloying process were introduced particularly.
详细介绍了双层辉光离子渗金属技术的基本原理、放电模式及渗金属过程。
The type, constitutes, function, structure, principle of double glow plasma discharge alloying process equipment for surface was briefly introduced.
简要介绍了双层辉光等离子表面合金化设备的类型、组成、功能、结构、原理等。
On the basis of the study the deoxidation alloying process and Ladle refining process are put forward in order to check nitrogen pick-up in liquid steel.
在此研究基础上，提出了脱氧合金化及钢包精炼工艺，以减少钢液吸氮。
The formation mechanism of polymer solid alloy and the theoretical model of alloying process were discussed based on mechanical alloying and mechanochemical principles.
以机械合金和力化学原理为基础，讨论了高分子固体合金的形成机理和合金化过程的理论模型。
This paper deals with the question of the sputtering and permeating mechanism on double glow discharge surface alloying process. Four permeating models are put forward.
本文从理论上分析了双层辉光离子渗金属的溅射问题及渗入机理，提出了四种渗入模型。
According to the production practice and advanced technology at home and abroad, alloying process of Si element is discussed in respect of Si characteristic in aluminium alloy.
针对铝合金元素硅的特点，结合生产实际和目前国内外先进技术，对元素硅的添加工艺进行了探讨。
According to the energy condition of solute vacancy complex diffusion, the mechanism of solute vacancy diffusion played an important role in the double glow plasma surface alloying process.
据溶质空位复合体扩散的能量条件，提出溶质空位复合体扩散机制在双层辉光离子钨钼共渗中起重要作用。
In this paper the pivotal complication affecting casting surface alloying is studied. And the appropriate surface alloying process is put forward to improve the hard wearing and thermostability.
本文研究了影响铸件表面合金化的关键因素，研究出了适宜的提高耐磨、耐热性的表面合金化工艺。
The result shows that this method has a high surface alloying and deposition rate, and the multiple structure made of alloying and coating layers can be formed, in double glow suface alloying process.
将多重空心阴极溅射靶应用于双辉离子金属渗镀试验。结果表明，这种方法可以加速金属渗镀层的形成。
The process flows of magnesium alloy surface alloying and electrophoretic coating were introduced.
介绍了镁合金表面合金化及电泳涂装工艺流程。
Process formula and operation steps of magnesium alloy surface alloying were discussed.
讨论了镁合金表面合金化的工艺配方及其操作步骤。
In this paper the mechanism and process of light beam surface alloying were investigated by SEM, X-ray diffraction, optical microscope, microhardness etc.
采用SEM、X射线、光学显微镜、显微硬度计等手段研究了高能密度光束表面合金化的机理和工艺。
Cracks easily form during the Laser Rapid Forming process of high alloying superalloy, which becomes an limitation for the technique coming into use.
对于高合金化的高温合金，激光快速成形过程中易于出现裂纹等缺陷，成为影响其进入实际应用的主要障碍之一。
The alloying annealing process of zinc layer is also described.
并对锌层合金化退火工艺进行了阐述。
It was pointed out that the high quality zinc powders could be produced by controlling effectively the processes of alloying, atomizing and sieving, as well as reducing the pollution in every process.
指出，通过加强对合金化、雾化和筛分过程的有限控制，减少各流程的污染，能生产出高质量的无汞锌粉。
The influence of alloying and spheroidization process on microstructure and mechanical properties of UHCS is investigated.
研究了合金化和球化工艺对超高碳钢组织和性能的影响。
The ESD process affects the distribution of the alloying elements in the deposited layer and results in obvious difference of the carbides in deposited layer.
沉积工艺影响沉积层内合金元素的分布，导致沉积层内的碳化物有明显的差异。
The effect of infiltration process on the microstructure and properties of iron-base materials with high alloying elements content was studied by metallography, SEM and mechanical property tests.
采用光学显微镜、扫描电镜观察和力学性能测试研究了熔渗处理对高合金铁基材料显微组织和性能的影响。
The kinetic process of non equilibrium segregation of manganese and alloying elements is discussed.
讨论了锰及其他合金元素不平衡偏聚的动力学过程。
The above requirement can be attained by the refinement of the granule and the crystalline grain, surface activation and store-energy effect obtained during the process of mechanical alloying.
利用机械合金化过程产生的颗粒细化、晶粒细化、表面活化及储能作用可以达到上述要求。
In regard to non wear resistance of the white iron shot in the practical application process, alloy iron shot have been produced by means of adding alloying element and proper heat treatment.
针对白口铁丸在实际应用过程中不耐磨易破碎的现象，在白口铸铁中通过添加合金元素及适当热处理等手段生产合金铁丸。
These defects result from VAR process, which relates to the size of titanium sponge and alloying elements before melting.
这些缺陷都是真空电弧重熔过程的产物，与海绵钛和添加元素的粒度有关。
The process of making high speed steel by direct alloying of scheelite, molybdenum oxide and V2O5 is calculated and analyzed by thermodynamics and kinetics.
对用白钨矿、氧化钼和V2O5直接合金化冶炼高速钢进行了热力学和动力学的计算和分析。
Effects of the alloying elements on the heat-treatment process, microstructure and mechanical properties of a novel gun steel combined with high strength and toughness were investigated.
研究了合金化元素对新型高强韧炮钢的热处理制度、显微组织和力学性能的影响。
In this paper the Optimum amounts of alloying elements were designed through the orthogonality test. The brief recommendation of process of production was also presented.
本文通过正交试验设计了最佳的合金成分，并简要介绍了合金的生产工艺。
The theory and process of mechanical alloying were described and the adopted apparatuses were introduced.
描述了机械合金化的过程和机理，并对机械合金化采用的设备进行了介绍。
In addition, a number of factors in the mechanical alloying and the limitation of this process are explained in detail.
另外对影响机械合金化过程的因素以及该工艺存在的缺陷进行了阐述。
Electron beam modification process were used on the surfaces of cast aluminum alloy samples with various alloying elements.
利用电子束技术对添加不同合金化元素的铸造铝合金试样表面进行电子束改性试验研究。
应用推荐