Ultrasonic is used for tin-cerium alloy electroplating.
将超声波应用于锡铈合金电镀。
Additive EA-2 for zinc based alloy electroplating was synthesized.
研制了一种锌基合金电镀添加剂ea - 2。
The effect of additives on zinc-nickel alloy electroplating was studied.
研究了添加剂在电镀锌镍合金中的作用。
The effects of ultrasonic on the tin-bismuth alloy electroplating are studied.
研究了超声波对锡铋合金电镀的影响。
Advances of cobalt alloy electroplating at home and abroad in recent years is reviewed.
综述了近年来国内外在电镀钴合金方面的研究进展。
Lead, tin and tin-lead alloy electroplating technologies using these two products are introduced.
介绍了采用两种产品的电镀铅、锡及铅-锡合金工艺。
In this article, the effects of rare earth on Zn-Ni alloy electroplating from sulfate bath have been studied.
研究了稀土在硫酸盐体系电镀锌镍合金中的作用。
The technology of low hydrogen embrittlement Zn-Ni alloy electroplating on aeronautic high strength steel was studied.
对航空高强钢低氢脆电镀锌-镍合金工艺进行研究。
This text simply introduce the technology for Sn-Ce-Ni alloy electroplating. Plating solution is stable. Coat quality is good.
本文简要介绍锡铈镍合金电镀工艺。本工艺镀液稳定，电镀层质量好。
A new technology of tin-nickel alloy electroplating from a pyrophosphating bath was studied. The effect of some plating parameters on the tin-nickel alloy coating was discussed.
研究了从焦磷酸盐槽液中电镀锡镍合金的一种新工艺，讨论了一些电镀参数对锡镍合金镀层的影响。
The effect of bath composition, operating conditions and additives on Sn content of electrodeposits during the process of Sn-Ni alloy electroplating in alkaline baths had been studied.
在研究碱性锡镍合金的电沉积过程中，讨论了镀液中各成分的含量、电镀工艺条件的改变及添加剂对锡镍合金镀层成分和外观的影响规律。
Holding primary hardness, magnetism and plating properties of matrix, protection performance of steel was improved by combining the Zn - Fe alloy electroplating and phosphating technology.
为了保持基体金属硬度、磁性以及电镀层性能等均不变，将锌铁合金电镀工艺与磷化工艺进行了组合，以提高钢铁件的防护性能。
By the reduction on industrial Chromic anhydride-methanol, the trivalent chromium main salt was made. The technological formula and standard of Chromium-Nickel alloy electroplating were given.
采用工业铬酐-甲醇还原法制备三价铬主盐，给出了电镀铬-镍合金工艺配方与工艺规范并对镀层性能进行了测试。
Electroplating: use the principle of electrolysis, the metal and alloy parts deposition in the surface, form even, density, good adhesion of the metal layer process.
电镀：利用电解原理，使金属或合金沉积在制件表面，形成均匀、致密、结合力良好的金属层的过程。
As the electroplating pure copper layer on copper alloy exceeds a critical thickness, the surface electroplating treatment can improve the copper alloy's resistance against oxidation failure greatly.
当铜合金表面的电镀纯铜层厚度超过一个临界值，表面电镀纯铜处理可以明显改善材料的耐氧化剥离性。
Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.
锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。
Electroplating is to use the principle of electrolysis in some metal surface plating a thin layer of the other metal and alloy process.
电镀就是利用电解原理在某些金属表面上镀上一薄层其它金属或合金的过程。
Nickeltungsten alloy coating was deposited on copper plate making use of electroplating in the bath composed of nickel sulfate, sodium tungstate, and trisodium citrate.
采用硫酸镍、钨酸钠和柠檬酸三钠为基本组分的镀液，通过电镀的方法在紫铜试片上沉积得到了镍钨合金镀层。
Solderability of Sn Pb alloy deposit is determined by electroplating process and its maintenance, post treatment rinsing, storage of MLCI, etc.
MLCI端头电极锡-铅合金电镀工艺及维护、镀后的清洗、MLCI的储存影响镀层的耐焊性和可焊性。
Keypoints for quality control in electroplating of zinc alloy die castings are described, with stresses on the involved considerations during die designing, casting and plating pretreatment.
论述了锌压铸件电镀质量控制的要点，特别指出了模具设计、压铸及预处理等步骤中应考虑的一些问题。
A new electroplating technology of solderable bright Sn-Sb alloy of bath components and operating conditions were studied.
研究了一种新型可焊性光亮锡锑合金电镀工艺的镀液配方和电镀操作条件；
The possibility of the electroplating process applied to Ni-B alloy was studied.
研究了用电镀法制取镍硼合金的可能性。
The process of cyanide copper electroplating is replaced by the proposed process of pyrophosphate electroplating copper on magnesium alloy.
用研究的焦磷酸盐镀铜工艺代替氰化镀铜工艺作为过渡铜镀层的无氰镀工艺。
Tin Grains:Our tin grains are of moderate size. Special alloy compositions are available upon request. This product is an ideal material applied to the existing electroplating techniques.
锡粒：本公司生产的锡粒大小适中，其合金成份可依据不同要求而定制。对目前的电镀工艺应用较为适合。
The first layer encases the eternal surfaces of the metallic core and is produced by electroplating copper or copper alloy from a first bath containing copper ions.
第一层包覆所述金属芯的外表面，并且通过从包含铜离子的第一浴中电镀铜或铜合金产生。
The effect of tech-nologies of electroplating under ultrasonic field, heat evaporation plating in vacuum and chemical plated ternary-alloy on properties of diamond is more remarkable.
其中以超声波电镀，真空热蒸镀及化学镀三元合金效果最佳。
Said method is that a pretreatment before electroplating and a special formula solution used in the treatment are used to ensure the alloy surface from oxidation and ensure its electroplating quality.
本方法是利用电镀前的预处理及处理中使用特殊配方的溶液，以保证合金表面不被氧化，保证电镀质量。
Cadmium ion mainly comes from industrial waste water discharged by electroplating, battery, alloy manufacturing, pigment, mining and refining process.
镉离子主要来源于电镀、电池、合金制造、颜料、采矿与选矿行业排放的工业废水。
Tin - bismuth alloy was electroplating by electrodepositing associated with ultrasonic agitation.
将超声和电沉积相结合电镀了锡铋合金。
Tin - bismuth alloy was electroplating by electrodepositing associated with ultrasonic agitation.
将超声和电沉积相结合电镀了锡铋合金。
应用推荐