A method to test the cycle life of hydrogen storage alloy electrode was reported.
本文报告了一种方法评估储氢合金电极的循环寿命。
The surface treatment of hydrogen storage alloy electrode is an effective method to improve its electrochemical performances.
贮氢合金电极的表面处理是改善其电化学性能的有效方法。
The content of carbonyl nickel powder used as conduct agent almost does not affect the maximum discharge capacity of this alloy electrode.
而导电羰基镍粉含量的变化对合金电极的放电容量几乎没有影响。
Mass production of a new generation of patented products - multi-purpose ozone power supply, the introduction of nano-nickel alloy electrode supporting film ozone.
批量生产的新一代专利产品—多用途臭氧电源，引进纳米镍钛合金电极臭氧发生片配套。
The kinetic law and reaction mechanism or electrochemical reduction and the adsorption of unsaturated organic acid on Ir-Rh alloy electrode were systematically studied.
对不饱和有机酸在铱-铑合金电极上的吸附和电化学还原过程的动力学规律和反应机理进行了系统的研究。
The results show that the copper-microencapsulated hydrogen-storage alloy electrode has better performances in capacity, high-rate discharge, self-discharge and cycle life.
实验结果表明，表面微包覆铜贮氢电极在放电容量、高倍率放电、自放电和循环寿命性能方面均有明显改进。
The electrochemical techniques of encapsulating the amorphous nickel-nonmetal alloy on the surface of hydrogen-storage alloy electrode or hydrogen-storage alloy powder was used in this paper.
本论文提出了用电化学的方法在储氢合金电极或储氢合金粉表面包覆镍-非金属非晶态合金的工艺方法。
The chemical compositions, mechanical properties, solidification crack risistance and intergranular corrosion risistance of HT-105 electrode for welding of 690 alloy are introduced in this paper.
介绍了焊接690合金焊条HT-105的化学成分、力学性能、抗热裂性能和抗晶间腐蚀性能。
A process for fabricating CuCrZr alloy spot-welding electrode by three cold extrusions is developed, with effect of cold deformation on alloy properties explored.
研究了用铜铬锆电极合金经三道工序冷挤压成点焊电极的工艺，还探讨了挤压冷变形对合金性能的影响。
After mixing the sponge titanium and the alloy elements, the blacks for making titanium electrode were pressed.
采用了海绵钛与合金元素混合均匀后压制自耗电极工艺。
Properties and preparing process of tri layer films with Ag base coating, Ni electrodeposit, Sn Pb alloy for terminal electrode of multilayer chip inductor were described.
介绍了叠层片式电感三层端头电极即银基底电极、镍层、锡-铅合金镀层的性能及制备工艺。
We report on the contact process utilizing fritting phenomena between al electrode and probes made of tin or tin gold alloy.
我们曾经报告过利用铝电极和锡或锡合金探头之间的烧结现象来实现接触的过程。
In this paper, the effect of cold-work and heat treatment on the properties of Copper-Chromium-Zirconium electrode alloy is dealt with, its optimum processing parameters established.
本文研究了热处理和冷变形对铜铬锆电极合金性能的影响，并确定了电极合金的工艺最佳参数。
High chromium-nickel alloy side electrode maintains.
高质量铬镍合金侧电极保持精确的间隙。
Electrolyzing anode material used in the invention is inert electrode such as graphite or cermet or metal alloy preferably.
本发明使用的电解阳极材料优选为石墨或金属陶瓷、金属合金等惰性电极。
The SL circuit reduces electrode wear to 50%. Specially designed PL circuit is excellent for hard alloy workpiece with fast machining speed.
SL回路可将电极之损耗降低50%；PL回路为超硬合金专用，加工速度快。
With increasing the additive, the thermodynamic characteristics, the electrochemical performances and the kinetic properties of the composite electrode alloy are significantly improved.
随着添加量的增大，复合电极合金的热力学特征、电化学性能以及动力学性能均有显著改善。
Suitable for SMWA/MMA welding of low carbon steel and low alloy steel with all kinds of electrode.
适用于所有牌号的焊条对低碳钢、普通低合金钢的手工电焊弧。
It was found that the mixture or alloy of tin and aluminum is generated in the contact area and remains on both the probe and the aluminum electrode after breaking the contact.
我们发现在断开探头和电极之间的接触后，锡和铝的混合物或合金在接触面和探头或铝电极上形成了。
In this paper, composite electrode alloy with multi-phase is prepared by two-step re-melting.
本文利用两步熔炼法制备多相复合电极合金。
Hence, the spot welding result of aluminum alloy with the coating mixture of mineral oil and BBC is better, and the electrode life of aluminum alloy spot welding is prolonged.
因而铝合金表面涂敷矿物油和BBC的混合物时，电极烧损程度较轻，电极使用寿命得到了延长。
The high strength and high toughness hardfacing covered electrode to the medium-high carbon alloy steel surface' repair was put forward in this paper.
本文针对焊缝熔敷金属在高强时，容易开裂问题展开研究，研制了中、高碳合金钢工件表面修复的高强、高韧新型堆焊焊条。
It proved that the main reason of lapse of Ni-MH batteries after high-rate cycles is the fading of negative electrode alloy performance.
实验结果表明，高倍率充放电循环使电池性能下降的主要原因是负极合金性能的恶化。
A hardfacing electrode containing boron and various alloy elements has been developed.
研制出一种含硼等多种合金元素的耐高温磨损堆焊焊条。
The development and the experimental result of W alloy welding electrode are expounded in present paper.
本文阐述了钨合金焊条的研制和试验结果。
Hydrogen-absorbing alloy, method of surface modification of the alloy, negative electrode for battery and alkaline secondary battery.
储氢合金，合金表面改性方法，电池和碱性二次电池负极。
Using experimental and finite element analysis methods, the effects of electrode forging force are investigated on residual stress and fatigue behavior of spot welded aluminum alloy joints.
采用试验和有限元分析相结合的方法，考察了锻压力对铝合金电阻点焊接头中残余应力和接头疲劳行为的影响。
The aluminum-air battery with open configuration was successfully assembled using Al alloy as anode, air electrode as cathode and NaCl solution as electrolyte.
本文使用铝合金作阳极、空气电极作阴极、氯化钠溶液作电解液，组装了开放式结构铝空气电池，同时使用镁阳极组装了封闭式结构镁空气电池。
The influence of an organic complexing agent AD on electrodeposition of Mg-Ni alloy in organic bath on Cu electrode was studied by using cyclic voltammetry and AC impedance methods.
通过循环伏安法、交流阻抗法研究了一种有机络合剂对有机镀液中镁-镍合金在铜上共沉积的影响。
When Al alloy is used to be negative electrode, negative voltage produced more heat.
反极性期间由于铝合金作为阴极，阴极压降大电弧产热量也增大。
应用推荐