Difficult-cutting high-alloy cast iron.
难加工的高合金铸铁。
Difficult-cutting high-alloy cast iron. Nodular cast iron.
难加工的高合金铸铁。球墨铸铁。
Cast iron material used for fine makings of gray iron or alloy cast iron.
所用铸铁材料为细颗料的灰口铸铁或合金铸铁。
Then the powder metallurgy gear is compared with gear made of alloy cast iron.
并对合金铸铁机油泵驱动齿轮和粉末冶金机油泵驱动齿轮加以比较。
The result showed that ADI has better wear resistance than low alloy cast iron and forging steel.
结果表明，其耐磨性明显优于低合金球铁和锻钢。
The corrosion of low alloy cast iron used for fabrication of brine valves in the sea in this paper.
本文介绍了海水阀用低合金铸铁在海水中的腐蚀行为。
This paper presents a new type material for making air valve cage-alloy cast iron countaining Cr. Ni.
本文介绍一种制做内燃饥气阀座的新材质——铬镍铜合金铸铁。
The product can be used a nickel-alloy raw material for producing stainless steel, alloy steel and alloy cast iron.
产品可以作为镍合金原料用于冶炼不锈钢、合金钢和合金铸铁。
Mid-Manganese alloy cast iron brake shoe was studied and compared with mid-phosphorous and high-phosphorous cast iron.
本文以中锰合金铸铁闸瓦为研究对象，并与中磷铸铁、高磷铸铁进行了对比研究。
In this paper, the corrosion behavior of RE-Ni-Cu and Cu-Ni alloy cast iron in the caustic lye of soda was researched.
本文对稀土镍铜合金铸铁和铜镍合金铸铁在烧碱液中的腐蚀行为进行了系统的研究。
I was founded in 1994, is a specialized in cast iron, cast steel, alloy cast iron, ductile iron casting processing units.
我公司成立于1994年，是一家专门从事铸铁、铸钢、合金铸铁、球墨铸铁的铸造加工单位。
The action of tin element in minute alloy cast iron were studied and its mechanisation of affect residual stress were announced in this paper.
研究锡元素在微合金灰铸铁中的行为，揭示其影响铸件残余应力的机理。
The industrial tests have shown that the service life of new alloy cast iron crucible is 2-3 times as long as ordinary grey cast iron crucible.
工作试验结果表明，新材质制造的坩埚使用寿命是普通铸铁坩埚的2—3倍。
The industrial test results have shown that the service life of new low alloy cast iron crucible is 2-3 times as long as ordinary grey cast iron crucible.
工业试验结果表明，新材质制造的坩蜗使用寿命是普通铸铁坩埚的2 ~3倍。
In this paper, the current research progress in glass mould of alloy cast iron is described and several glass mould materials of alloy cast iron are analyzed.
概述了合金铸铁玻璃模具的研究，对多种合金铸铁玻璃模具材料进行了分析。
In order to deeply comprehend the wear regularity of chilled alloy cast iron tappet, the influence of surface layer microstructure on wear resistance was studied.
为了深入了解冷激合金铸铁气门挺杆的磨损规律，研究了冷激合金铸铁气门挺杆表层组织对耐磨性的影响。
Manufacturing of alloy cast iron grinding ball by means of composite modification of tungsten slag is a feasible way due to its simple process, low cost and good product quality.
采用复合变质方法，开发工艺简单、成本低的钨渣合金铸铁磨球是一种有效的途径，其材质性能可以满足使用的要求。
The roll disk wearing testing machine is used to study the wearability of alloy cast iron after laser melting. The test result shows that the wear weightlessness is reduced greatly.
应用对滚圆盘磨损试验机研究了合金铸铁经激光熔融处理后的耐磨性，试验结果指出，激光处理试样的磨损失重大为减少。
The results also find that wear resistance of niobium cast iron oil ring is 87.3% higher than that of CrMoCu alloy cast iron along with the cost reduction for niobium cast iron oil ring.
通过快速模拟磨损试验发现铌铸铁油环耐磨性能比铬钼铜油环提高87.3%，并降低了油环的制造成本。
Gray iron--an alloy of iron carbon and silicon ; easily cast; good pressure tightness in the as-castcondition.
灰口铁--一种铁碳和硅的合金；易于铸造；在铸态下具有很好的压力紧固性。
The results showed that the alloy coatings can increase significantly the contact fatigue lifetime of alloy cast-iron gears. The microstructure and properties of coatings were also analysed.
试验结果表明：表面合金涂层能显著提高合金铸铁齿轮的接触疲劳寿命，文中同时分析了合金涂层的组织结构和性能。
The company products mainly rely on nodular cast iron and alloy casting iron.
公司产品主要以球墨铸铁及合金铸铁为主。
For cast iron, carbon steel, alloy steel, stainless steel cutting and grinding processing, especially the grinding effect is very good.
用于铸铁、碳钢、合金钢、不锈钢的切削和磨削加工，尤其磨剂效果甚佳。
These are graphite, high silicon cast iron, lead silver alloy, platinum, and even scrap steel rails.
所用材料有石墨、高硅铸铁、铅银合金、铂、甚至废钢轨等。
Our products: Various gray iron, ductile iron, common cast steel, low-alloy steel, high manganese steel, etc various parts of architectural and mechanical engineering.
本公司主要生产各种灰铁件、球铁件、铸钢件、高猛钢件等各种建筑、工程机械用零部件。
By observing and analyzing the casting test piece, we have found a metallurgical integrating layer that is made up of chromizing cast-iron alloy layer.
我们还对铸渗质量较好的铸渗试件进行了观察和分析，发现铸铁渗铬合金层与母材结合良好，呈冶金结合。
The effect of heating temperature on abrasion resistance of high alloy wear-resistant cast iron was studied.
研究了加热温度对高合金耐磨铸铁耐磨性的影响。
Ferrous tool materials have iron as a base metal and include tool steel, alloy steel, carbon steel, and cast iron.
黑色工具材料以铁为基材，包括工具钢，合金钢，碳钢，铸铁。
Ferrous tool materials have iron as a base metal and include tool steel, alloy steel, carbon steel, and cast iron.
黑色工具材料以铁为基材，包括工具钢，合金钢，碳钢，铸铁。
应用推荐