In the alloy analysis and the formation system of image of isotope density. It has adopted the pulse range analyzer to gather the high-speed datas and obtained the satisfactory effects.
在合金分析及同位素密度成像系统中，采用本脉冲幅度分析器进行高速数据采集，取得了满意的效果。
The effects of annealing on the activity of al alloy anode were studied by measurement of polarization curves and analysis of SEM.
采用极化曲线测试结合扫描电子显微镜分析技术，研究了退火对铝合金阳极的活性的影响。
Consequently, it is feasible to determine electro-etching method as the sample preparation method about quantitative metallographic analysis in CuCrRE alloy.
因此，确定电解浸蚀法作为铜铬稀土合金定量金相分析的试样制备方法是切实可行的。
The paper discourses the aluminum alloy cage's application in the reconstruction of mines in detail. Technical analysis and the development of aluminum alloy conveyances are discussed.
用改造事例对铝合金罐笼的应用作了详细比较，并对铝合金提升器在矿山的应用作了技术分析和前景探讨。
The analysis of filtering flow process of aluminum cast alloy based on hydraulic simulation was carried out. The filtering efficiency formula was established.
通过水力学模拟试验对铸造铝合金过滤流动过程进行了分析，建立了过滤效率的水力学模拟试验关系式。
By microstructure analysis the evolutive characteristic of structure of rapidly solidified Cu Zn alloy in different temperature preservation was initially made clear.
通过金相组织分析，初步摸清铜锌合金快速凝固组织在不同温度下保温组织演变的特点。
By electron diffraction analysis, it is identified that the alloy phase has a face center orthogonal structure and there are some orientation relationship between the Mg ma.
通过电子衍射分析确定出该合金相具有面心正交结构，与镁基体间存在着一定的取向关系。
The behavior of an new shape memory alloy (SMA) damper, the cone shape memory alloy damper, is studied through numerical analysis and tests.
本文对一种新型形状记忆合金阻尼器——锥形形状记忆合金阻尼器的性能进行了数值分析和试验研究。
Detail analysis of technological parameters influencing particle shape and distribution of alloy powder has been made.
对影响合金粉末颗粒形状和粒度分布的工艺参数进行了较为详细的分析。
After analysis, the major affecting factor of alloy fluidity and body contraction are compositions, pouring temperature and the inclusions of alloy.
经过分析得出，影响合金流动性和体收缩的主要因素是合金的成分、浇注温度及合金液中含有的夹杂物。
The surface component analysis showed the titanium oxidation was formed on NiTi alloy surface after oxidation and ion implantation.
表面成分分析表明，氧化和离子注入后，表面形成钛氧化物，使合金的耐腐蚀性得到明显的改善。
Being the reducing medium, the volume expansion of alloy brings gravitation and crack through analysis and observation of accessory's macro-and micro structure.
经分析与实体零件的宏观与微观组织观察，此现象是因为还原介质渗入，引起合金体积膨胀而产生引力，造成应力裂纹。
Experimental study of plasma carburization technology and analysis of wear test of carburizing layers are done aimed at alloy bar grate material surface.
针对合金篦条材料表面进行等离子渗碳技术的试验研究和渗层的耐磨性能实验分析。
The rapid quantitative analysis of nitrogen in alloy constructional steel and electrical engineering steel with optical emission spectrometry is described.
叙述了用原子发射光谱法快速定量分析合金结构钢和电工钢中氮。
The morphology of Si phase has a remarkable effect on mechanical properties of Al Si alloy by quantitative metallographical measurement and regression analysis.
通过定量金相测量及回归分析，硅相的形态对合金的力学性能影响显著。
The method was developed for the matrix determination and the component analysis by the character line in Ni-based alloy based on digital simulation.
在镍基合金可见光谱计算机模拟基础上，研究利用镍元素及成分元素特征谱线进行基体鉴别和成分元素分析的方法。
The results show that this method is particularly suitable to qualitative and quantitative analysis of aluminum alloy, aluminum mineral and mixtures of aluminum.
结果表明该方法特别适合于含铝混合物、铝合金及矿物等复杂体系中铝的定性定量分析。
The defects forming mechanism in the Laser Rapid Forming(LRF) process of titanium and titanium alloy was studied through microscopic analysis methods.
采用微观测试分析方法，研究了钛合金激光快速成形过程中缺陷的形成机理。
The paper introduces a method and its principle which is based on magnetic property of alloy and used for alloy microstructure analysis semi-quantitatively or quantitatively.
介绍了一种根据合金的磁性能半定量、定量地分析合金组织状态的原理和方法。
Finally, applying Probabilistic Fracture Mechanics Approach (PFMA), the reliability analysis is carried out for helicopter metal material (aluminum alloy) structure having initial cracks.
最后，应用概率断裂力学方法(PFMA)，对含初始裂纹体的直升机金属材料(铝合金)构件的疲劳裂纹扩展寿命进行可靠性分析。
This paper introduces the design of hardware and software of a thermal-analysis meter for measuring Al-Si alloy modification effect, and discusses its application.
介绍了测量铝硅合金变质处理效果用热分析仪的硬件、软件设计及实际应用。
On the basis of the analysis of the character of aluminum alloy profile for subway and its producing difficulty, structure design and various technical parameter of extruded die were detailed.
在分析了地铁车辆用铝合金型材的特点及其生产难度的基础上，对挤压模具的结构设计和各项技术参数的确定做了详细说明。
The visible spectra of chromium in ferro-alloy were analyzed by digital automatic analysis system.
使用可见光谱数字化自动分析系统对铁基合金中铬元素可见光谱进行了分析测定。
The crater analysis for Al-alloy targets of different ballistic properties by metallography is presented in this paper.
本文用金相试验的方法对抗弹性能不同的铝合金靶板，作了弹坑解剖分析。
This paper introduces the analysis method of silver-antimony alloy coating and antimony content.
介绍了银-锑合金镀层和镀液中锑含量的分析方法。
Through analysis of the fin piece blanking problem, using the characteristics of aluminum alloy retrogression phenomenon, solved the problem of fin piece warp.
通过对翼片冲裁时出现的问题进行分析，利用铝合金材料具有回归现象的特点，解决了翼片平面翘曲问题。
A method of measuring metal linear expansion coefficient of aluminium alloy by a percent meter is introduced. The error analysis in the result of the measurement is conducted.
本文介绍了一种用百分表测量铝合金金属线胀系数的方法，并对测量结果进行了误差分析。
The proper selected composition range of alloy is given by the analysis of this experimental data and the relative phase diagram.
从实验给出的数据和有关相图等资料的分析，大致给出了合适的合金成分选择范围。
In this paper, die structure and design parameters, techno - economic analysis of liquid extrusion for the aluminium alloy oil pump body were introduced.
本文介绍了铝合金油泵壳体液态挤压的模具结构及设计参数、技术经济分析。
In this paper, by using the method of experiment researching and theory analysis, the stability of the axially loaded aluminum alloy pipe in structure of the folding tent was studied.
本文采用试验研究与理论分析相结合的方法，对某折叠式帐篷结构中的轴心受压铝合金圆管构件的受压稳定承载力进行了研究分析。
应用推荐