The aging treatment had a certain degree of influence on the properties, but the influence was insignificancy.
时效处理对性能有一定程度的影响，但影响不大。
The results showed that multiple solution and aging treatment had a significant effect on increasing plastic property and fracture toughness, although had little effect on strength.
结果表明：多重固溶时效热处理可以显著提高合金的塑性和断裂韧度，而对强度的影响不大。
Overall steel welding machine, the vibration aging treatment, deformation and rigidity.
机床整体钢结构焊接，经震动时效处理，不变形，刚性好。
Desolation transformation is an important solid phase transformation of metals, and is the theoretical basis of aging treatment.
脱溶转变是金属材料的一种重要固态转变，是时效处理的理论基础。
The results show that multi-stage aging treatment can increase wear resistance, corrosion resistance and electrical properties of NBC alloy, but microhardness has not changing apparently.
结果表明，NBC合金经过分级时效处理后，耐磨性、 耐腐蚀性和电导率有所提高，而显微硬度无明显变化；
The effect of aging treatment on the tensile strength, elongation, hardness and microstructure of a cobalt base superalloy used for pistons rings was investigated in this paper.
本文研究了不同热处理时效温度和时效时间对一种活塞环用钴基高温合金的抗拉强度、延伸率、硬度及组织的影响。
To introduce natural aging of galvanized low carbon steel wire after softening treatment and effect of the aging on mechanical properties of steel wire.
介绍镀锌低碳钢丝经软化处理后产生的自然时效及其对钢丝力学性能的影响。
It is shown that the mechanical properties of annealed sample of 2224 aluminum alloy are improved by the combination of solid solution and aging treatment after ECAP, the size of grain is refined.
结果表明，退火态2224铝合金经e CAP挤压后，进行固溶和时效处理，明显提高了合金的力学性能，细化了合金的晶粒。
Hard anodizing film could be obtained on Al-Cu alloy surface which had been treated with solid solution treatment and natural aging.
经固溶处理和自然时效的铝铜合金可以进行硬质阳极氧化。
Compared with the samples prepared by normal aging treatment, the test samples prepared by overaging treatment have better wear resistance.
采用固溶过时效处理之后，耐磨性优于正常固溶时效处理的试样。
Aging treatment is performed for microalloyed steel for cold hardening bolt, which can stabilize its microstructure, enhance its strength and reduce its residual stress.
冷作强化非调质钢螺栓经时效处理可以稳定组织、提高强度、降低残余应力。
The main components such as body, crossbeam, column etc. were through aging treatment, so they have good stability and high machining precision.
床身、横梁、立柱等主要部件均经过时效处理，稳定性好，加工精度高；
The microstructure and properties of chromium bronze after homogenizing treatment, solid solution and aging treatment, cool deformation and aging was studied.
研究了均匀化处理、固溶时效、冷变形时效等对铬青铜显微组织和性能的影响。
The treatment effect than traditional heat aging and vibration time, become a truly mobile stress relief furnace, can be replaced to eliminate the stress for the purpose of heat aging.
其处理效果优于热时效和传统振动时效，成为名符其实并可移动的应力消除炉，可取代以消除应力为目的的其它时效方式。
The aging treatment of 15-5ph stainless parts was carried out, the influence rule of aging process on measure stability and hardness was found. It provides basis for working out the proper process.
对15 - 5PH不锈钢制零件进行时效处理，找到时效工艺对尺寸稳定性、硬度的影响规律，为制定合理的机加工艺路线提供依据。
The results show that the cold rolling before aging treatment can enhance the conductivity of C194 copper alloy.
结果表明，在时效处理前进行冷轧，可有效提高C194引线框架铜合金的导电性。
Resisting casting iron and have relieved the internal stress through aging annealing treatment to ensure the high precision and high rigidity to prolong the service life of the machine.
机体结构部分： 本机主要铸件均采用高级耐磨铸铁料，并经由时效退火处理，消除内应力，以确保高精度不变，高刚性，延长了机器使用寿命。
After cold rolling, aging and recrystallization treatment, there are many weak interfaces in Q235 steel.
Q 2 35钢经冷轧—时效—再结晶处理后，钢中存在大量弱界面。
Microhardness testing during aging treatment in high purity steel bearing copper was carried out.
对经时效处理后的含铜高纯钢进行了显微硬度测试。
This heat treatment process known as aging.
这样的热处理工艺称为时效处理。
However, it still needs study on aging precipitation behavior and the effect of aging treatment on its performance because its service conditions are very bad in the practical production.
然而，由于实际生产中服役条件非常恶劣，该钢管时效析出行为及时效处理对其性能的影响还有待进一步研究。
Heat treatment technics such as tempering, vibration aging, induction quenching and so on adopted on key parts like bed enable more stable accuracy and longer working life.
龙门刨床身等关键件的回火、震动时效、超音频淬火等热处理工艺，使机床精度更稳定，使用寿命更长。
This paper is about construction and characteristics of C194, which are effected by heat-treatment of solution and aging .
研究了C194合金变形与固溶时效热处理工艺条件对其组织性能的影响。
Heat treatment technics such as tempering, vibration aging, induction quenching and so on adopted on key parts like bed enable more stable accuracy and longer working life.
床身等关键件的回火、震动时效、超音频淬火等热处理工艺，使机床精度更稳定，使用寿命更长。
Moreover, it is found that aging treatment has obvious effect on the martensitic transformation temperatures.
时效处理对合金的相变温度有显著影响。
The appraisal result proved that, in the all kinds of aging treatment method about casts iron on engine bed, the vibration is the only green one.
评价结果证明，机床铸铁件的各种时效处理方法中，振动时效方法是唯一的绿色制造方法。
To introduce natural aging of galvanized low carbon steel wire after softening treatment and effect of the aging on...
介绍镀锌低碳钢丝经软化处理后产生的自然时效及其对钢丝力学性能的影响。
To improve the properties of the casting martensite stainless steels, the aging heat-treatment at different temperature was done.
为提高铸造马氏体不锈钢的性能，对其进行了不同温度下的时效处理。
The effect of heat treatment(including homogenizing treatment, quenching method and artificial aging)on the structure and mechanical property of 6063 aluminum alloy was studied.
研究了热处理工艺（包括均匀化处理、淬火方式和人工时效等）对6063铝合金组织和力学性能的影响。
The effect of heat treatment(including homogenizing treatment, quenching method and artificial aging)on the structure and mechanical property of 6063 aluminum alloy was studied.
研究了热处理工艺（包括均匀化处理、淬火方式和人工时效等）对6063铝合金组织和力学性能的影响。
应用推荐