By choosing the solvent, colorant, adhesive, conductive regulator, we have established the composition of the ink and analyzed its main mechanism.
本文通过对油墨成分中溶剂、着色剂、粘合剂、电导调节剂等选材，确立了该油墨的组成，并分析了其主要作用机。
A coatings containing polytetrafluoroethylene (PTFE) was prepared with polyphenylene sulfide (PPS) and polyimide (PI) as adhesive which were mixed with PTFE in a suitable solvent.
以聚笨硫醚(PPS)和聚酰亚胺(PI)为复合粘结剂与聚四氟乙烯(PTFE)混合于合适的溶剂中，制成含ptfe的涂料。
The selection principal of low toxic mixed solvent of CR adhesive is depended upon hydrogen bond index and solubility parameter of the solvent.
氯丁胶粘剂的低毒混合溶剂的选择原则是：根据溶剂的氢键指数及溶解度参数。
The chloroprene rubber(CR) combined with methyl methylallate(MMA) and allenoic acid(AA) to obtain graft adhesive in low poisonous solvent.
氯丁橡胶（CR）、甲基丙烯酸甲酯（MMA）和丙烯酸（AA）在低毒溶剂中接枝成胶。
The prepared ink has good solution viscosity, surface force, solvent resistance and adhesive capacity.
墨水溶液粘度、表面张力及耐溶剂性能、粘附性能均较佳。
It is studied that the main influence factors on adhesive strength of CR adhesives, including mixed rubber, solvent, resin etc.
前言：研究了影响氯丁胶粘剂拉伸强度主要因素，探讨了混炼胶、溶剂、树脂等对氯丁胶粘剂拉伸粘接强度的影响。
In addition, the adhesive has the characters of no volatile solvent and no pollution.
另外，该胶粘剂不含挥发性溶剂，具有无污染、“绿色”等环保特性。
In this paper, two components solvent free adhesive which composition is polyurethane epoxy resin were introduced.
研制出一种无溶剂的双组份聚氨酯-环氧树脂胶粘剂。
Amoxicillin bio adhesive microspheres were prepared by solvent evaporation method. The central composite design was employed to optimize the prescription and technology.
采用溶媒蒸发法制备阿莫西林粘附微球，并应用星点设计法优化微球处方工艺。
The effect of PVB structure, proportion of PVB and modifying resin and solvent type on adhesive properties was investigated.
对于PVB的结构、PVB与改性树脂的配比、以及溶剂的选择对胶粘剂性能的影响进行了研究。
With the improvement of people's living and the enhance for awareness of environmental protection, waterborne polyurethane adhesive will replace solvent-based polyurethane adhesive inevitably.
随着人们生活水平的提高和环保意识的增强，水性聚氨酯胶粘剂必然将取代溶剂型聚氨酯胶粘剂。
The decorative adhesive can use the alcohol as the main solvent and has the advantages of little toxicity and low cost.
使得该装饰胶可采用乙醇作主要溶剂，毒性小，成本低廉。
The prepared composite film adhesive can use the alcohol as the main solvent and has the advantages of little toxicity and low cost.
使制得的复膜胶可采用乙醇作醇类溶剂，毒性小，成本低廉。
The one component solvent-free moisture curing polyurethane adhesive was researched.
研制了单组分无溶剂型湿固化聚氨酯胶粘剂。
It is studied that the main influence factors on adhesive strength of CR adhesives, including mixed rubber, solvent, resin etc.
研究了影响氯丁胶粘剂拉伸强度主要因素，探讨了混炼胶、溶剂、树脂等对氯丁胶粘剂拉伸粘接强度的影响。
In this paper, the problems related to-for mutation design, preparation technology and general properties of a new modified SBS solvent-based adhesive are discussed in detail.
详细论述了一种新型改性SBS溶剂型胶粘剂的配方设计、制备工艺、基本性能等有关问题。
Preparative method of two-components, water-based vinyl polyurethane adhesive was introduced. The adhesive which has good bonding strength. water-and solvent-resistance etc. can used for wood process.
介绍了一种双组分水性乙烯基聚氨酯胶粘剂的制备方法，该胶用于木材加工，具有优良的粘接强度、耐水、耐溶剂等特点。
The performance index, main points for application of non-solvent adhesive tape and train of thoughts in its development are introduced in the article.
介绍了无溶剂型胶粘带的研制思路、性能指标和施工技术要点。
It is accepted by all present that the adhesive used was a mixture, and the player has used it innocently without knowing that it contained a prohibited solvent.
球员的解释是，他所使用的粘合剂是一种混合物，在使用时并不知道其含有违禁成分。列席者接受这样的解释。
A solvent resistant adhesive obtained by the crosslinking of a hydroxyl or urea or hydrocarbon terminated unsaturated polyurethane or polyurethane-urea polymer with a peroxide or a silicone hydride.
耐溶剂粘合剂，其通过使用过氧化物或硅烷来交联羟基或脲或烃封端的不饱和聚氨酯或聚氨酯-脲聚合物而获得。
The effect of PVB structure, proportion of PVB and modifying resin and solvent type on adhesive properties was investigate…
对于PVB的结构、PVB与改性树脂的配比、以及溶剂的选择对胶粘剂性能的影响进行了研究。
We are one of the leading companies adopting environmental non-solvent technology in China to produce top-grade glassine adhesive materials in rolls.
在中国率先采用环保型无溶剂涂硅技术，大量生产高档格拉辛卷筒不干胶材料。
Solvent Resistance: the coating can be soaked by xylene, alcohol and other laboratory chemicals and reagents for a long time, and remain adhesive.
耐溶剂性：涂层可耐受二甲苯、酒精等各种实验室化学品和试剂的长时间浸泡，保持不脱落。
Good performance in adhesion, High Temperature Resistance, Solvent Resistance, Strong Holding Force, No Residual Adhesive Left. For protecting gold finger in the process of PCB.
粘性佳，耐高温、耐溶剂、保持力强、不残胶。；用于印刷线路板(PCB)过锡炉喷锡和波峰焊过程中遮蔽保护金手指。
Hot melt adhesive is a kind of non-solvent, 100% fixed component thermal plasticity material.
热溶胶是一种不含任何溶剂，为100%固定成份热可塑性物质。
Hot melt adhesive is a kind of non-solvent, 100% fixed component thermal plasticity material.
热溶胶是一种不含任何溶剂，为100%固定成份热可塑性物质。
应用推荐