Although not strictly antibacterial, these products have anti-adhesive effects, interfering with the ability of the bacteria to attach to the cellular receptor.
尽管没有严格的抗菌性，但是该产品有抗黏附的作用，阻碍细菌与细胞受体的接触。
Using the orthogonal matrix experimental method, the effects of borax or TDI on the PVA adhesive were discussed.
采用正交实验法研究硼砂和TDI的加入量对PV A粘合剂的耐水性能和剥离强度的影响。
Adhesive, pretreatment and size of corn straw core have great effects on cushioning performance.
影响玉米秸秆缓冲包装材料性能的因素主要有粘合剂、预处理和粒径等。
The effects of adhesive formulation and process conditions upon the performance of modified corn starch adhesive were explored in this study.
本论文主要研究了改性玉米淀粉胶粘剂的主要成分配比及工艺条件对产品性能的影响。
The results show that the selection of second monomer has great effects on the adhesive strength. Good adhesion for PVC can be obtained if AM is used as the second monomer.
试验结果表明：第二单体的选择对粘接强度影响很大，以AM作为第二单体所得接枝共聚物对PVC具有优异的粘接性能。
Two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied.
合成了两种硅氧烷环氧固化剂，并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。
L9 (34) orthogonal experiment was adopted, the effects of concentration of initiator, reaction time, volume ratio of monomers and amount of PVA on shear strength of adhesive were investigated.
采用L9(34)正交实验，考察了引发剂的浓度、反应时间、单体的体积比和PVA用量对木材胶黏剂的剪切强度的影响。
The effects of silver particles morphologies and size on the electrical bulk resistivity of conductive adhesive were described.
从导电性角度考查银粉颗粒形貌和粒径大小对导电胶电阻率的影响。
This paper concisely introduced the effects of the choice of curing agent, the flexibilizer quality and the active filler on the mechanical properties of the adhesive.
简要介绍了固化剂的选择、不同增韧剂的优劣及活性填料等材料对胶粘剂力学性能的影响。
The adhesive condition of wheel and its effects on the wheel wear are analyzed, and the restraint measures of wheel adhesion is proposed.
分析了磨削中的砂轮粘附情况及其对砂轮磨损的影响，提出了抑制砂轮粘附的措施。
This paper describes the effects of various barks, reinforcing resins, keeping-time after lay-up and pressure on the bonding strength of plywood made from Masson pine bark adhesive.
本文探讨了用马尾松树皮胶压制室外型胶合板时，不同部位的树皮、不同增强剂、增强剂用量、单板涂胶后的陈放时间、热压压力等因素对胶合强度的影响。
This paper introduced the composing way of FB thermostable resin adhesive and the way of making resin coated sands, Discussed the effects of composition on properties of coated sand.
介绍了FB耐高温树脂胶粘剂的合成方法，以及制备耐高温树脂涂层砂的方法，讨论了各组分对涂层砂性能的影。
Based on experimental data, adhesive length, the number of layers and sticking technology, and the effects of the parameters are discussed, and the bond mechanism is described.
探讨了碳纤维布的粘接长度、层数、宽度比以及粘贴工艺等不同粘接参数对复合构件粘接性能的影响，初步描述了碳纤维布与钢构件的粘接机理。
Objective to investigate the effects of the adhesive Membrane of Chitosan in prevention of abdominal adhesion and the possible mechanism of its action.
目的研究壳聚糖防粘连膜在大鼠粘连模型中的防止术后腹腔内腹膜粘连的作用，并对其可能的作用机制进行探讨。
Objective to investigate the effects of oxidized low-density lipoprotein receptor 1 (LOX-1) on secretion of adhesive molecules mediated by ox-LDL in human umbilical endothelial cells (HUVECs).
目的探讨血凝素样氧化低密度脂蛋白受体1 (LOX - 1)在氧化低密度脂蛋白(ox - LDL)诱导血管内皮细胞粘附分子表达中的作用。
The effects of coupling agent, filler and toughening agent on adhesive strength were also studied.
还研究了偶联剂、填料和增韧剂等对粘接强度的影响。
The radiation effects of the adhesive used in space were studied.
对星用胶粘剂的辐射效应进行了研究。
Effects of catalyst FeSO_(4) on molecular mass distribution, contents of carboxyl and carbonyl groups, and adhesive properties of the oxidized starches were investigated.
考察了催化剂硫酸亚铁对氧化木薯淀粉的绝对分子量及其分布、羧基和羰基含量以及其胶粘性能的影响。
The effects of dosage of components in adhesive on cohesive force was discussed, and the countermeasure on improving the adhesiveness was suggested in this paper.
通过各组分用量对纸塑复膜胶粘接力影响的讨论，提出了改良粘接性方面的对策。
The effects of the variety and the quantity or the emulsifiers, the dosages of the modified monomers and the crosslinking monomers on the properties of the adhesive were discussed.
讨论了乳化剂的品种和用量以及改性单体和交联单体的用量对胶粘剂性能的影响。
The method preparation of finishing adhesive was studied. The effects of different amount of thickening agent, AA and initiator on the properties of adhesive were discussed.
研究了装演复膜胶的制备方法，探讨了引发剂用量与转化率的关系及AA用量、不同增粘树脂对粘接性能的影响。
The results showed that moisture content of veneer, the electric potential difference of backing plates and the interaction of them all had significantly effects on adhesive strength.
结果表明：单板含水率和垫板间电势差及其交互作用对胶合强度都有极显著影响。
Effects of purity of raw materials, molar ratio of urea and formaldehyde, reaction temperatures and reaction time on the properties of urea-formaldehyde resin adhesive were studied.
研究了树脂合成过程中原材料纯度、尿素和甲醛的摩尔比、反应温度以及反应时间等对粘度和固含量等性能的影响。
Methods21 cases of severe infant eczema were given Fufang Chidili Lotion and Erhuang Adhesive Plaster, and statistics the curative effects.
方法采用自拟复方赤地利洗剂合二黄膏治疗重症婴儿湿疹21例，并统计疗效。
The effects of cutting speed and aided oxygen pressure on the cutting quality and the adhesive slag quantity were analysed in the experiment of cutting of aluminium plate by CO2 laser.
在CO2激光切割铝面板的试验中，分析了切割速度和辅助氧压对切割质量及熔渣附着量的影响；解决了工件逆反射的难题；获得了激光切割铝板的较佳工艺参数。
The formulation of a hot-melt sealing adhesive for shrinkable materials is presented. The effects of stick agent, filler and butyl rubber on the properties of the adhesive are studied.
本文提出了一种用于热熔收缩材料的热熔密封胶配方，研究了增粘剂，填料、丁基橡胶对密封胶性能的影响。
The effects of the ratio of chemical modified soy-adhesive to phenol formaldehyde (PF) resin on the shear strength of plywood were studied.
研究了化学改性豆胶加入酚醛(PF)树脂交联剂后提高胶合板强度的问题。
The effects of loading rate, interfacial adhesive energy, relaxation time of matrix material, average size of particles, and the particle-size dispersity on the energy dissipation are discussed.
在此基础上，计算了材料中的粘性耗散功和损伤耗散功，并讨论了加载速率、界面粘结能、基体材料的松弛时间、平均粒径和粒径分散度等对这两种耗散机制的影响。
The effects of the amounts of curing agent and HTBN on the adhesive properties, as well as glass transition temperature, dynamic mechanical properties and electrical properties were investigated.
研究了固化剂用量及丁腈羟用量对粘接性能的影响及这种增韧环氧树脂的玻璃化转变、动态力学性能和电性能，并对反应机理进行了初步探讨。
The effects of the amounts of curing agent and HTBN on the adhesive properties, as well as glass transition temperature, dynamic mechanical properties and electrical properties were investigated.
研究了固化剂用量及丁腈羟用量对粘接性能的影响及这种增韧环氧树脂的玻璃化转变、动态力学性能和电性能，并对反应机理进行了初步探讨。
应用推荐