Backstepping control called a novel nonlinear strategy is one of the high focus research in ac servo drive for simple arithmetic and facility project implementation.
反推控制是一种新颖的非线性控制策略，算法简单，易于工程实现，是目前交流伺服控制研究热点之一。
The hardware of the system is composed of Q-series PLC, graphic operation terminal F970GOT, intelligent positioning module QD75M4, and AC servo drive unit from Mitsubishi.
系统硬件采用三菱公司Q系列plc、图示操作终端F970GOT、智能定位模块QD 75 M4及交流伺服驱动单元。
The hardware and software design of three_dimensional control system in the laser inner carver is introduced, also transmission mechanism ac servo drive has been given account.
介绍了激光内雕机中三维控制系统硬件和软件的设计，并对传动机构交流伺服驱动进行了论述。
Introduce the composition, the hardware and software for two AC servo motors which drive loads simultaneously under rigid connection. Also Present the experimental results.
介绍在刚性连接方式下，用两台交流伺服电机同时驱动同一负载方案的组成、硬件和软件，给出了该系统的实验结果。
The lower DSP (TMS F2812) is used to realize the interpolation and control of three axes for the retrofitted CNC milling machine equipped with SIEMENS servo drive amplifiers and ac servo motors.
下位TMSF2812型DSP芯片则主要用于实现复杂的插补及控制算法，并以西门子伺服驱动放大器和交流伺服电机作为驱动单元，对改造后的数控铣床各轴进行位置控制。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.
重点介绍了永磁交流伺服系统的控制策略，位置检测和辨识、主电路和驱动技术等关键技术。
A global sliding model variable structure control scheme based on artificial neuron compensation for a direct drive AC permanent magnet linear servo system are presented in this paper.
针对直接驱动的交流永磁直线伺服系统，提出一种基于神经元补偿控制的全程滑模变结构控制策略。
The feed drive system of a precision cold ring rolling mill adopts AC servo motor and mechanical transmission, rather than conventional electro-hydraulic actuator.
采用交流伺服电机和机械驱动进给系统的冷轧环机，其进给伺服控制系统的设计需要一个新的工艺动力学模型。
The AC Servo-System drive is used instead of the traditional CAM driving mode to keep the synchronization of the pin-roller motor.
采用交流伺服驱动代替传统的机械式的凸轮传动机构，实现针辊电机与主电机的同步驱动。
The AC Servo-System drive is used instead of the traditional CAM driving mode in order to realize pin-roller motor keep synchronization with the other motor.
采用交流伺服驱动代替传统的机械式的凸轮传动机构，实现针辊电机与其他电机的同步驱动。
Feed transmission: using AC servo motor to drive the precise ball screw sets that supported by special ball screw bearing, which improves the rigidity and precision of feed movement.
进给传动：三向进给均采用交流伺服电机驱动精密滚珠丝杆，专用丝杆轴承支承，提高了机床的进给运动刚性和精度。
As to the paddle wave maker, the system USES Linear module and AC servo to drive.
对于摇板造波机，系统采用了交流伺服直联线性模组的传动方式。
The hybrid AC servo Press H1F realized high performance in the combination of advanced CNC control and hybrid drive mechanism (pat. p).
复合ac伺服压力机h 1f是利用CNC控制与复合驱动机构(申请专利中)的组合，实现了其超过性能。
AC servo motor with harmonic drive is used to drive the robot manipulators and the synchro-belt drive is used to drive the wrist after the present robot is analyzed.
通过分析现有机器人的结构，机械臂驱动采用交流伺服电机驱动谐波齿轮传动方式实现，腕部结构则采用同步带传动结构方式。
This paper presents a sliding mode variable structure control (SMVSC) method based on fuzzy self-learning for a direct-drive AC Lin ear servo system.
针对直接驱动直线式交流伺服系统，提出了一种基于模糊自学习的滑模变结构控制方案。
The most precision AC servo motor drive, operation simple and fast, efficient work to shorten the preparation time, increasing productivity.
采用最精密AC伺服马达驱动，操作简单又快速，有效缩短工作准备时间，提高生产力。
Machine tool feed system is usually driven by ac servo motor ball screw feed drive to achieve, to simplify the structure.
机床的进给系统通常是通过交流伺服电机驱动的驱动滚珠丝杠饲料，简化结构，实现。
A speed regulation method with auto disturbance rejection controller (ADRC) for a linear direct-drive AC servo system is presented.
设计了一种基于自抗扰控制原理的永磁直线电动机调速系统。
A speed regulation method with auto disturbance rejection controller (ADRC) for a linear direct-drive AC servo system is presented.
设计了一种基于自抗扰控制原理的永磁直线电动机调速系统。
应用推荐