If the whole single ac servo control system is accomplish, farther research is must.
完成整个单芯片交流伺服控制系统尚需进行进一步的研究。
This article takes TMS320F2812 as a core, adopting fuzzy PI control method to design an AC servo control system.
本文就以TMS320F 2812为核心,以模糊pi控制策略设计交流伺服系统。
This paper introduces an AC servo control system based on the design of CPLD and analogue controller integration.
交流伺服控制系统的组成本文所设计的交流伺服控制系统是用于数控机床上的进给驱动系统。
The purpose of this paper is researching intelligent two-axis AC servo control system based on CAN BUS in the background of rotary scream printing .
本课题的目的是研究以圆网印花为工程背景的基于CAN总线的智能双轴交流伺服控制系统。
At present, ac servo control system has widely applied in automation area, for example NC machine, steel rolling equipment, paper making equipment and weave machine etc.
目前,交流伺服控制系统已经广泛应用于数控机床、轧钢设备、造纸设备、纺织设备等自动化领域。
For the load of equipment, such as the operation of complex features, using the main exchange Frequency vector control technology, using advanced car AC servo control technology.
针对该设备负载大、运行情况复杂等特点,主轴采用了交流变频调速矢量控制技术,小车采用了先进的交流伺服控制技术。
Against the heavy equipment load and complex operations characteristic, the spindle used vector control technology of ac frequency speed control; the car used advanced ac servo control technology.
针对该设备负载大、运行情况复杂等特点,主轴采用了交流变频调速矢量控制技术,小车采用了先进的交流伺服控制技术。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件,可以和直流伺服电机一样构成高精度,高性能的半闭环或闭环控制系统。
This paper presents an AC servo system based on fuzzy neural variable structure control.
本文提出了一种基于模糊神经变结构控制的交流伺服系统。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
目前常用的伺服电机是交流伺服电机,在电机的轴端装有光电编码器,通过检测转子角度用以变频控制。
The lower DSP (TMS F2812) is used to realize the interpolation and control of three axes for the retrofitted CNC milling machine equipped with SIEMENS servo drive amplifiers and ac servo motors.
下位TMSF2812型DSP芯片则主要用于实现复杂的插补及控制算法,并以西门子伺服驱动放大器和交流伺服电机作为驱动单元,对改造后的数控铣床各轴进行位置控制。
The results of experiments show that the ac servo system based on fuzzy control has quick response speed, high steady accuracy and good robustness.
实验结果表明基于模糊控制的交流伺服系统具有较快的响应速度、较高的稳态精度和较强的鲁棒性。
The results of experiments show that ac servo system based on fuzzy PID control has quick response speed, high steady accuracy and good robustness.
实验结果表明,基于模糊pid控制的交流伺服系统具有响应速度快、稳态精度高和鲁棒性强等特点。
The results of experiments show that AC servo system based on integral partition PID control has quick response speed and h.
实验结果表明,基于积分分离PID控制的交流伺服系统具有响应速度快、稳态精度高等特点。
DELTA AC servo motors and controllers to determine the precise length cut, closed loop control.
采用台达交流伺服电机及控制器实现精确定长剪切,全闭环控制。
Aim at technics and control of build-up standard machine, particular introduced the appliance of Siemens SIMODRIVE 611a ac servo system in build-up standard machine.
针对机械比对力机的工艺和控制要求,详细介绍了西门子SIMODRIVE 611a交流伺服驱动系统在机械比对力机上的应用。
The paper introduces the hardware and software design of an AC servo motor control card based on 80C196KC.
介绍自行研制的基于80C196KC单片机的交流伺服电机控制卡的硬件设计及其软件实现。
The AC position servo systems are extensively used in the industrial control systems.
交流位置伺服系统广泛应用于工业控制系统中。
SVC(TND)SERIES single phase high precision full automatic ac voltage regulator composable of contact auto voltage regulator, servo motor automatic control circuit etc.
系列单相高精度全自动交流稳压器,由接触式自耦调压伺服式电动机、自动控制电路等组成。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
常用的伺服电机是交流伺服电机,在电机的轴端装有光电编码器,通过检测转子角度用以变频控制。
A cascaded slide mode control scheme is designed for permanent magnetic synchronous machine ac servo system.
针对永磁同步电机交流伺服系统,提出了串级滑模控制方案。
The full digital technique was adopted to realize the servo control of the ac permanent-magnet synchronous (motor.) the technology was applied in the industrial sewing machine.
采用全数字技术实现对交流永磁同步电机的伺服控制,并将此项技术应用于工业缝纫机领域。
The hardware and software design of three_dimensional control system in the laser inner carver is introduced, also transmission mechanism ac servo drive has been given account.
介绍了激光内雕机中三维控制系统硬件和软件的设计,并对传动机构交流伺服驱动进行了论述。
For digitized AC servo system, it needs software to support it's closed-loop control. Its control quality is decided by the program of control computation directly.
数字化的交流伺服系统是靠软件完成控制计算来支持闭环控制的,它的控制计算程序直接决定了系统的控制质量。
A new sensorless control method for AC permanent magnet linear servo motor using a sliding mode observer is proposed in this paper.
提出了一种采用滑模观测器的交流永磁直线伺服电机无传感器控制的新方法。
The whole project design of the AC servo motor control system based on TMS320F2812 is introduced.
介绍了基于TMS320F2812交流伺服电机控制系统的整体方案设计。
In this paper a new control strategy suited for AC servo system of permanent magnet AC motor is introduced.
本文介绍了一种适用于正弦波永磁同步伺服系统的控制策略。
In the meantime, by using an AC servo motor as the driving parts and based on the MPC02 motion control card, the open control system was formed.
同时采用交流伺服电机作为驱动元件,基于MPC02运动控制卡作为上位控制单元构建了开放式控制系统。
In the meantime, by using an AC servo motor as the driving parts and based on the MPC02 motion control card, the open control system was formed.
同时采用交流伺服电机作为驱动元件,基于MPC02运动控制卡作为上位控制单元构建了开放式控制系统。
应用推荐