Kim said, "We will be able to use a low-temperature polycrystal silicon with the sixth-generation size glass substrate."
Kim称：“我们现在已经可以在6G尺寸级别的基板上应用低温多晶硅技术。
Conventional CVD coating process requires a metal compound that will volatilize at a fairly low temperature and decompose to a metal when it contacts with the substrate at higher temperature.
常规的化学蒸发沉淀涂层工艺需要一种容易在相当低温度下挥发并且在较高温度下与基体接触时能分解成纯金属的金属化合物。
In HFCVD system the substrate temperature is a key factor which deeply affects the quality of diamond films.
在热丝化学气相沉积金刚石系统中，衬底温度是影响金刚石成膜质量的关键因素之一。
Temperature profile in single and multi filament CVD system and temperature distribution in the substrate surface were analysised based on a simplified model and the addition principle respectively.
基于一简单模型和叠加原理，分别研究了单丝和多丝化学气相沉积(CVD)系统的温度场及基底表面的温度分布。
Some properties demonstrated that BSTS polar glass-ceramics is a promising material in the high temperature applications and can be used as an alternative substrate of SAW devices.
部分性能的测试表明BSTS极性微晶玻璃在高温区应用方面很有前途，并且是一种比较有前途的SAW基片替代材料。
With IR temperature-measuring principle, a non-contact measuring system for measuring laser spot temperature on semiconductor substrate is designed.
利用红外辐射测温原理，设计成半导体基片上激光焦斑温度不接触测量系统。
A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.
进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。
A low-temperature radiation heater and substrate heater are designed and made aiming at the low evaporating temperature of organic semiconductor materials.
针对有机半导体材料的蒸发温度低的特点，设计并制作了低温辐射式加热器和衬底加热器。
The microhardness of nitriding layers obtained in a wide range of treatment temperature is 5 ~ 6 times higher than that of the substrate.
可在较宽的温度范围内对该钢进行脉冲直流等离子渗氮，获得表面硬度高于基底5 ~6倍的渗氮层。
Zinc oxide nanopillars are synthesized by chemical solution deposition on a pre-coated substrate at a low temperature.
在预处理基底上，采用化学溶液沉积法在低温下制备氧化锌纳米柱薄膜。
A high accuracy temperature sensor is designed by applying the temperature characteristics of a substrate bipolar transistor in CMOS technology.
利用CMOS工艺下衬底型双极晶体管的温度特性，设计了一种精度较高的温度传感器。
A special insulation coatings were studied, which provide a insulation layer between metal wire and metal substrate at high temperature.
本研究的目的是研制出一种特殊用途的耐高温绝缘涂层，该涂层用于提供金属丝与金属底材之间的绝缘。
Reducing the thermal stress between film and substrate during the descent temperature process and improving chemical bonds combination is a key problem to enhance thee adhesion.
提高金刚石薄膜与铜衬底附着力的关键是减小沉积结束后降温过程中产生的膜基热应力和提高膜基间化学键结合。
A multivariable control system has been developed which manipulates heat addition and inflow so as to control digestion temperature and effluent substrate concentration.
多变量控制系统的操作变量为供热量和进水量，被控变量为消化温度和消化污泥排出浓度。
Coating and the substrate surface temperature of the coating would have a bad contraction stress, caused by cracking and peeling off the coating.
涂层与基体表面的温度差会使涂层产生收缩应力，引起涂层开裂和剥落。
Finally, the channel-structured glass substrate was sealed to a cover glass plate by using room temperature bonding technique.
最后，采用室温键合技术，将带有微纳结构的基片与盖片封合成玻璃微-纳流控复合芯片。
The formulation of the nano composite material comprises the step of: sintering a micron substrate, a nano strengthening phase, rare earth, a grain growth inhibitor and the like at high temperature.
本发明的纳米复合材料配方由微米级基体、纳米级增强相、稀土和晶粒生长抑制剂等高温烧结而成。
This method is characterized in that the substrate is conveyed in the drying box while being heated at a given temperature (t).
本方法的特征在于，在给定温度(T)下加热所述支持体的同时，在干燥箱中输送所述支持体。
Further disclosed is a process for fabricating an organic thin-film transistor device, preferably by relative low-temperature sublimation or solution-phase deposition onto a substrate.
进一步公开了优选通过相对低温升华或溶液相沉积到基底上来制造有机薄膜晶体管器件的方法。
Since the coating made from the mixed components consists of organic substances, when being coated on a metal substrate, the coating can resist the corrosion of chemical under high temperature.
由上述组分混合制成的涂料由有机物构成，涂于金属底材上，其涂层耐化学品特性是耐高温下化学品的腐蚀。
A special alumina applying for catalyst substrate in automobile exhaust had been studied. some influence factor to this alumina, such as temperature, additives etc, had been studied too.
主要论述了汽车尾气催化剂载体用氧化铝的制备方法，对影响汽车尾气催化剂载体用氧化铝性能的因素进行了探讨。
A special alumina applying for catalyst substrate in automobile exhaust had been studied. some influence factor to this alumina, such as temperature, additives etc, had been studied too.
主要论述了汽车尾气催化剂载体用氧化铝的制备方法，对影响汽车尾气催化剂载体用氧化铝性能的因素进行了探讨。
应用推荐