A mathematic model of comprehensive evaluation is developed.
给出模糊综合评判的数学模型。
A mathematic model of using trajectory equations for firing data is presented.
给出了一种利用弹道方程决定射击诸元的数学模型。
A mathematic model of cellulose paper pyrolysis in the mechanic reactor was proposed.
本文建立了基于上述机理性试验台的纤维素热裂解机理模型。
A mathematic model has been built for the unsteady heat transfer from the kettle to the oil inside.
为此建立了高温超高压釜体到釜腔内液压油的非稳态传热模型。
Reconfiguration is considered as a typical subset problem, a mathematic model is built to solve it.
将重构问题抽象为子集类优化选择问题。建立适合解决此类问题的蚁群算法模型。
It has provided a simple and convenient method for establishing a mathematic model of a dynamic system.
它为建立动力学系统的数学模型提供了方便而简明的方法。
This paper sets up a mathematic model for the manpower deployment, which is a mixed integer programming model.
建立了兵力展开问题的数学模型，此模型是一个混合整数规划模型。
The working principle of the actuator was analyzed, and a mathematic model of the mechanical system was set up.
对驱动器工作原理进行了分析研究，建立了机械系统的数学模型。
A mathematic model is built after analyzing various kinds of digital filtering and processing the signal of sensor.
然后分析了各种数字滤波方法的特点，针对传感器信号的特点进行处理，并建立了数学模型。
It discusses the water-jet cutting process by the balance of energy, and builds a mathematic model of cutting depth.
论文从能量平衡的角度探讨了射流切割的过程，建立了水射流切割深度数学模型。
It constructs a mathematic model to describe gas transient flow according to the mass, momentum and energy conservation law.
根据气体瞬变流动过程中所遵循的质量、动量和能量守恒定律建立描述气体瞬变流动的数学模型。
First, a mathematic model of adjustable reactors based on the magnetic flux control is established and a deep analysis is made.
首先建立了基于磁通控制的可调电抗器的通用数学模型，说明了可调电抗器的基本原理。
The paper presented a mathematic model and control strategy on a three-phase voltage type rectifier under indirect current control.
该文对基于间接电流控制三相电压型整流器的数学模型和控制策略进行研究。
On the basis of error probability analysis, a mathematic model for optimal accuracy synthesis of industrial robot has been established.
在误差概率分析的基础上，建立了机器人机构精度概率优化综合的数学模型。
Establishes a mathematic model, taking into account the variation of frost density and the decrease of airflow rate caused by frost layer.
针对平肋肋片管式换热器的结霜过程，建立了数学模型，考虑了霜层密度变化和霜层阻力引起空气流量减小等因素。
A mathematic model was obtained by translating all parameter which in heat translation formula of heat changer into the parameter of heat pipe.
把热管传热量公式中的各参数转化为热管结构参数，从而推导出一数学模型。
In allusion to the features of military electronical products, a mathematic model based on the AHP fuzzy comprehensive evaluation is established.
采用基于AHP模糊综合评判的方法，针对军工电子产品的自身特点建立了其质量评价数学模型。
A mathematic model of the rolling batch heuristics is established in this paper, and an improved two phase heuristics is proposed for the problem.
本文建立了一种轧制批量计划问题的数学模型，提出一种改进的两阶段启发式算法，并对其求解。
According to the airflow tilt angle sensitive element and its output feature, a mathematic model on restraining acceleration interference is built.
根据气流式倾角敏感元件和气流式倾角敏感元件的输出特点，建立了抗加速度干扰的数学模型；
Objective: Setup a mathematic model of evaluating the investigation of patients attitude to nursing work to help administers make correct decisions.
前言： 目的：建立病人对护理工作满意度调查结果评价的数学模型，为管理者正确作出决策提供可靠依据。
On the VSP with time window, while the restraints of capacity and time windows are changed into object restraints, a mathematic model is established.
对于有时间窗的非满载VSP问题，将货运量约束和软时间窗约束转化为目标约束，建立了非满载VSP模型，设计了基于自然数编码，使用最大保留交叉、改进的反转变异等技术的遗传算法。
Objective: Setup a mathematic model of evaluating the investigation of patients attitude to nursing work to help administers 'make correct decisions.
目的：建立病人对护理工作满意度调查结果评价的数学模型，为管理者正确作出决策提供可靠依据。
A mathematic model based on heat and mass transfer in porous media was established for the simulation of paper drying in dryer section of paper machine.
根据多孔介质干燥过程中的传热传质理论，结合纸机工作特点，建立了纸页的干燥过程物理模型和数学模型。
A mathematic model of spray wall-impingement was established based on discrete droplet model (DDM) considering the operating conditions of diesel engine.
基于离散液滴模型(DDM)，结合柴油机实际工作情况，建立了喷雾碰壁的数学模型。
Based on the analysis of the human body heat loss, develops a mathematic model for predicting the mean thermal comfort vote in warm and humid environment.
并在分析人体散热的基础上，提出了一个可以对热湿环境中人体热舒适进行预测的数学模型。
Distribution parameter theory is applied to study earth leakage protection of DC trolley network and a mathematic model of trolley network is established.
应用分布参数理论，研究直流架线电网漏电保护问题，建立了架线电网的数学模型。
This paper proposes a mathematic model for laser carving. In addition, a fast laser-carving algorithm is given and it is proved to be excellent in practice.
建立了一种激光雕刻的数学模型，在此基础上，提出了一种快速激光雕刻算法。该算法经过实践检验，具有良好效果。
Based on the reliability theory and the function analysis of central air conditioning systems (CACS), establishes a mathematic model of the system reliability.
运用系统可靠性理论，结合集中空调系统的功能特点，建立了可靠性数学模型。
A mathematic model for optimization design and design variables were established, when loading performance of the drum was select as the aim of optimum design.
选择螺旋滚筒装煤生产率作为优化设计的目标，建立了其数学模型并确定了设计变量。
A mathematic model for optimization design and design variables were established, when loading performance of the drum was select as the aim of optimum design.
选择螺旋滚筒装煤生产率作为优化设计的目标，建立了其数学模型并确定了设计变量。
应用推荐