A heat transfer model of freezing in biological tissue (including normal biological tissue and tumor) is established.
建立了生物组织(含正常生物组织和肿瘤)冻结过程的传热模型。
An energy equation that incorporates a heat transfer model of porous medium is developed based on the first thermodynamic law.
以热力学第一定律为基础，引入多孔介质换热模型，建立了多孔介质发动机的能量方程。
A heat transfer model of silicone oil fan clutch is established by the thermal analysis and research of silicone oil fan clutch.
通过对硅油风扇离合器的生热与散热进行分析和研究，建立了硅油风扇离合器生热和散热的理论模型。
By analyzing the heat transfer law of lossless storage in cryogenic vessel, a heat transfer model was established and the differential equation was derived.
分析了低温液体容器无损存储时的传热规律，并建立了传热模型，得出了反映储罐绝热层温度变化的微分方程序。
A heat transfer model of the radiant floor heating system is established in this paper, and the temperature field in the floor is obtained by means of numerical simulation.
建立了低温地板辐射供暖系统传热过程的数学模型，通过数值模拟，用有限差分法计算了地板内的温度场。
A theoretical study on circulating fluidized beds in actual operation is described and a heat transfer model for fluidized beds circulating under high temperature is derived.
本文阐述了对实际运行的循环流化床的理论研究，推导出高温状态下循环流化床的传热模型。
Based on the study of the characteristics of heat and mass transfer of absorption, a numerical model to simulate the process of absorption of LiBr solution is established.
通过对溴化锂溶液在降膜吸收过程中传热、传质特性的分析，建立了垂直降膜吸收过程的数学模型。
A heat and mass transfer model was set up, and the simulation results were found to be in accordance with the experimental data.
建立了过程的热质传递模型，比较模拟数据与实验数据，验证了理论模型有较好的适用性。
A computational heat transfer model to describe the freezing process of continuous casting slab is developed.
开发了一种描述连铸坯凝固过程的热传输数学模型。
Based on the general review of the research method and history of the heat and moisture transfer through clothing, a new theoretical model is proposed in this thesis.
本文通过对服装热湿传递研究方法及其历史的回顾，针对现有理论模型存在的不足提出了一种新的热湿传递机制模型。
Based on the results of the experiment, a FEM model for the heat transfer of the metallic honeycombed plate was established, which took the combination of heat conduction and radiation into account.
在试验结果的基础上，考虑传导和辐射传热的偶合作用，建立了该金属蜂窝平板传热的有限元分析模型。
A mathematical model has been established for fluid flow and heat transfer in weld pool with a deformed surface.
建立了熔池表面存在变形的流场与热场的数学模型。
A mathematic model based on heat and mass transfer in porous media was established for the simulation of paper drying in dryer section of paper machine.
根据多孔介质干燥过程中的传热传质理论，结合纸机工作特点，建立了纸页的干燥过程物理模型和数学模型。
Based on experimental models, the paper sets up three-dimensional steady heat transfer and flow physical model and mathematical model on a three polluting heat sources after simplification.
本文在实验模型的基础上，经简化建立了有三个污染源的置换通风三维稳定传热、流动的物理模型和数学模型。
By applying theory of heat transfer, a melting model of material filament in liquefied pipeline is built and solved by numerical method.
应用传热学理论，建立材料丝在液化管中的熔融模型。采用数值解方法，求出该模型的解。
A numerical model of freezing phase change heat transfer in metallic foams was established.
建立了泡沫金属内冻结相变传热过程的传热模型。
A numerical method is presented for the two dimensional quasi steady state heat transfer on high power density laser welding processes according to the keyhole model.
对高能量密度激光匙孔焊接过程的二维准稳态传热进行了计算方法的研究。
The mass transfer force concept was used to develop a model for the heat and mass transfer from a single superheated bubble rising in the water pool.
该文从传质推动力角度出发建立了高温气泡在水中上升过程的传热传质模型，计算结果与文献报道的实验数据、模拟结果基本吻合。
Sets up a mathematical model of unsteady heat transfer of deep underground structure based on the mechanism of heat transfer.
基于地下厂房的传热机理，建立了深埋地下建筑动态传热的数学模型；
A new physical model of condensation heat transfer on cosine-type corrugated surfaces is presented.
本文提出了在余弦型波纹表面上进行冷凝传热的一个新物理模型。
A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed.
对运动电弧作用下脉冲tIG焊接熔池流场与热场动态变化过程建立了三维数学模型。
Then a stable heat and mass transfer mathematical model was developed and numerical simulation was conducted by using calcium chloride as the desiccant.
然后建立了其稳态传热传质过程的简化数学模型，对采用氯化钙溶液的再生过程进行了实例计算。
Analyzing the heat transfer of thermometric sensor for liquid steel, a relevant finite element model is developed for the sensor.
在分析钢水测温传感器传热过程的基础上，建立了测温传感器的有限元模型。
In this paper, a mathematical model of heat transfer in tube annealing furnace, in which some parameters are confirmed through the embedded thermocouple experiments is presented.
在炉内传热机理研究的基础上，结合实际生产过程中的热电偶实验，建立了钢管光亮退火炉热处理过程数学模型。
On the base of thin film evaporation mechanism of the channel, a comprehensive heat transfer model for thermosyphon boiling in narrow channel is developed.
基于这种狭缝通道气泡底部薄液膜蒸发机理，建立了狭缝沸腾传热组合机理模型。
Base on the physical model of heat transfer of RH process, a temperature prediction model of molten steel for RH KTB refining process was developed.
根据RH精炼过程钢水传热的物理模型，提出了预报RH精炼过程钢水温度的数学模型。
A model on the heat transfer of a fin tube radiator aircraft under micro gravity is established.
建立了微重力环境下管肋式空间辐射器传热过程的数学模型。
A three-dimensional heat transfer model based on the tool shape for FSW is present in this paper.
根据搅拌头形状与尺寸，建立了FSW三维传热有限元模型。
This paper analyzed the heat exchange between ceramic honeycomb regenerator and gas, and established a heat transfer process mathematical model for ceramic honeycomb regenerator.
分析了高风温燃烧系统中陶瓷蜂窝蓄热体和气体间的热量交换，建立了陶瓷蜂窝蓄热体传热过程数学模型。
This paper analyzed the heat exchange between ceramic honeycomb regenerator and gas, and established a heat transfer process mathematical model for ceramic honeycomb regenerator.
分析了高风温燃烧系统中陶瓷蜂窝蓄热体和气体间的热量交换，建立了陶瓷蜂窝蓄热体传热过程数学模型。
应用推荐