The adaptive beam is composed of piezoelectric ceramic sensors, actuators, and a flexible beam.
由传感器、作动器与梁主体结构组成梁式自适应结构。
Time delay filter technique is applied in the control of reducing residual vibration of a flexible beam.
将时滞滤波器技术应用在柔性机械臂残留振荡的控制中，获得了好的控制效果。
In this paper, the rigid flexible coupling dynamic behaviour of a flexible beam in free motions is studied.
该文研究在大范围运动是自由的情况下柔性梁的刚-柔耦合动力学特征。
The impact dynamics of a rigid-flexible coupling system consisting of a rigid hub and a flexible beam is reported in this paper.
该文研究了刚体-柔性梁系统作大范围旋转运动时的撞击动力学问题。
This paper is concerned with the dynamics and control for planar, large Angle rapid slew maneuvering of a flexible multi body spacecraft, consisting of a rigid central body and a flexible beam.
研究一类构形为中心刚性带挠性梁的航天器平面快速大角度机动的动力学与控制问题。
This technique makes use of a small flexible mirror placed in the beam of a telescope.
这项技术利用了放置在望远镜光束上的一个小的可弯曲的镜子。
Due to the flexible beam guidance of the fiber laser, robot, scanner and fiber laser are forming a perfect team for those application tasks.
由于光纤激光器灵活的光束导向，机器人、振镜系统以及光纤激光器本身构成了一个完美的整体，以完成上述的应用任务。
The model of a spatial flexible rotor beam element is presented, and the dynamic equations of spatial manipulators considering joint and link flexibility is derived.
提出了空间柔性转子梁单元模型，建立了考虑关节及杆柔性的空间机器人动力学方程。
A flexible model of multi-axle vehicle ride comfort is presented by combining the vibration theory of elastic beam and modal analysis method.
运用弹性梁弯曲振动理论和模态分析法建立了多轴汽车平顺性分析的柔性模型。
Provides a directed, concentrated beam of light owing to its 50 cm long flexible arm.
有50厘米长的柔性灯臂，可以提供直接、集中的光束。
This paper discusses how to control a two axes magnetic suspension flexible beam system, which is a simplified model for magnetic bearing.
讨论了双轴磁悬挂柔性梁系统的控制问题，该系统是磁悬浮轴承的简化模型。
Laser forming is a flexible forming process that forms sheet metal by means of stresses induced by the laser beam.
激光成形技术是以激光为热源加热金属板料，依靠内应力使板料弯曲成形。
It focuses on the effects of time delay which was ignored in the previous research on the saturation control of a flexible cantilever beam.
考察在以前的研究中所忽略的时滞，对于柔性悬臂梁振动的饱和控制究竟可以产生什么影响。
The semiconductor layer and intermediate insulator of the SOI are etched in crossed region of the flexible beam cross and in a looped region above the support body.
在柔性梁的交叉区域中和在支撑体的上方的环形区域中对SOI的半导体层和中间绝缘层进行蚀刻。
The joint uses the spring-beam as a flexible framework, and the expandable cylindrical bellows elastomers by air pressure are used as a muscle.
此关节采用板弹簧为柔性骨架，波壳弹性体受气压后轴向膨胀作为肌肉动力。
In this paper, dynamics and control of a flexible hub-beam system are investigated with considering the effect of damping.
对考虑阻尼影响的中心刚体-柔性梁系统的动力特性和主动控制进行研究。
In this paper, dynamics of a rotating flexible beam is investigated by the assumed mode method.
采用假设模态法对旋转运动柔性梁的动力特性进行研究，给出简化的控制模型。
A beam steering system consisting of multiple single chip processors is described. It is simple and flexible because its phase calculation and control is implemented by software.
论述了由多片单片机构成的波控系统，因为波控系统的相位计算和控制是由软件实现的，所以这种波控系统具有简单、灵活的特点。
A model of spatial flexible beam element was proposed, and the dynamic equations of elements and branches of the parallel manipulator were derived.
建立了一种空间柔性梁单元模型，推导了柔性梁单元的动力学方程和并联机器人支链的动力学方程。
In this paper, active control of a rotating flexible beam with time delay is experimentally investigated.
对旋转运动柔性梁的时滞主动控制进行实验研究，验证时滞反馈控制的有效性。
The tire gets its name from the I-beam shaped tread, which is more flexible and forgiving than a square pin, so you get better traction.
轮胎得名于的I -梁形花纹，这是更为灵活和宽容比方形脚，因此你获得更好的牵引力。
According to mechanics, a stiffness model of the flexible beam was established. Then the parameters of the beams were determined by a simulation in finite element method.
根据力学原理，建立了柔性梁的刚度模型，结合有限元法进行仿真分析，确定出梁的结构参数尺寸。
This paper studies the discrete time optimal control of a flexible cantilever beam with time delay in control.
对考虑时滞影响的柔性悬臂梁的离散最优控制进行研究。
The trench is etched in the support substrate exposing the intermediate insulator, which is then etched to form a gap between the mass body and flexible beam cross.
在支撑体基底中蚀刻沟道，以暴露中间绝缘层，随后蚀刻中间绝缘层以在质量体和柔性梁之间形成间隙。
The brazing technology for capillary tube-sheet joints has been studied using a self-made flexible controlling equipment of vacuum electron beam brazing.
应用自制柔性化电子束钎焊系统对毛细管板接头的钎焊工艺进行了研究，探讨了钎焊工艺参数对钎料扩散深度以及钎脚高度的影响。
As a means for CO 2 laser beam, the handpiece for articulated arms was consisted of couple, fiber connecter, flexible metallic tube, lens.
用卤化银多晶光纤制成在关节式导光臂上使用的卤化银光纤手术刀头。 手术刀头由耦合器、光纤连接器、柔性金属管、聚焦透镜座等组成。
A new model of spatial flexible beam element is proposed. The dynamic equation of the spatial flexible beam element is derived based on the finite element theory and Lagrange equations.
建立一种空间有限元梁单元新模型，基于有限元法和Lagrange方程导出有限元梁单元的运动微分方程。
A new model of spatial flexible beam element is proposed. The dynamic equation of the spatial flexible beam element is derived based on the finite element theory and Lagrange equations.
建立一种空间有限元梁单元新模型，基于有限元法和Lagrange方程导出有限元梁单元的运动微分方程。
应用推荐