The paper describes a finite element simulation technique of the crack growth process in the homogeneous or inhomogeneous solids.
讨论了材料断裂过程的有限元模拟技术。
A finite element simulation software is developed, which is used to calculate capacitance between electrodes and define the sensitivity distribution of 12 electrode...
用自开发的有限元仿真软件包模拟计算电极对间的电容值，确定12电极电容层析成像系统的灵敏场分布。
A finite element simulation software is developed, which is used to calculate capacitance between electrodes and define the sensitivity distribution of 12 electrode capacitance tomography system.
用自开发的有限元仿真软件包模拟计算电极对间的电容值，确定12电极电容层析成像系统的灵敏场分布。
Based upon finite element simulation analysis, load tests and long-term observation, a detection and evaluation system for old steel bridge safety was developed in this thesis.
本文以桥梁仿真分析技术为主线，以整治效果为目标，以荷载试验和长期观测为检验手段，建立了既有钢桥裂纹安全检测评估系统。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
Based on the spread rule obtained, a fast simulation spread model for 2050 hot strip roughing trains at Baosteel has been established by combining the finite element analysis and analytical model.
根据研究所得的宽展规律，采用有限元分析与解析计算相结合的方法，建立了适合宝钢2050粗轧区带钢宽展计算的快速仿真模型。
Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.
利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
A method combining indentation test with finite element simulation is proposed to obtain the ductile parameters of KDP crystal by comparing indentation depth with finite element simulation depth.
提出了压痕实验与有限元仿真结合的方法。它采用压痕深度与有限元仿真深度进行对比，可求解出KDP晶体的塑性特性参数。
Whole mechanism being treated as a combination of six main parts, three dimensions nonlinear structural simulation is completed by means of dynamic explicit finite element code.
借助动态显式有限元方法，对该六个零件组成的机构整体进行了三维非线性结构数值模拟。
Finite element method is used to carry on numerical simulation of fluid-structure interaction for the system of TLD, and a verification of the reliability of fluid-structure coupled mode is made.
尝试用有限元分析的方法模拟TLD中流体与结构的耦合作用，并验证了由此方法建立起来的流固耦合模型的可靠性；
A new method for the treatment of constraints in finite element simulation of metal forming is put forward.
此文提出了适用于金属体积成形过程有限元模拟的约束处理算法。
This paper simulates the temperature field associated with laser surface quenching using ANSYS - a finite element analysis software, and a series of studies are carried out based on this simulation.
本文结合先进的大型有限元分析软件ANSYS，对激光表面淬火的温度场进行有限元模拟，并在此基础上，对此展开一系列研究。
We present a parallel mesh adaptive finite element algorithm for numerical simulation of flows based on error estimation.
给出了一种流动数值模拟中的基于误差估算的并行网格自适应有限元算法。
Finite element method is used as numerical simulation means and a program used to calculate saturated unsaturated seepage due to surface infiltration is worked out.
采用有限元方法作为数值模拟手段，编制了考虑地表入渗的饱和非饱和渗流有限元计算程序。
Three-dimensional flow simulation of flight element in mixing zone of a conical twin-screw is performed with a finite element package, ANSYS.
用ANSYS有限元分析软件对锥形双螺杆螺纹元件流道的流场进行了三维模拟。
This characteristic results in a simple and effective algorithm for the finite element simulation.
这一特点导致稳态波动有限元模拟的一种十分简便和有效的算法。
A general contact algorithm for parallel finite element simulation of dynamic contact problem is presented in this paper.
针对动态接触问题的有限元并行计算，提出了一种新的接触算法。
Based on ideal deformation theory, the authors developed a finite element inverse approach for sheet metal forming process simulation, and the computer program was implemented.
依据理想形变理论，研究开发了冲压成形过程模拟的有限元逆算法，并考虑了成形中的压边力，拉延筋等工艺条件，实现了计算机程序。
Presents numerical simulation of multi point forming of sheet using a finite element polycrystal model.
采用有限元多晶体模型对板材多点成形过程进行了数值模拟研究。
Based on the reduced scale ring rolling and finite element simulation materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
摘要研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
A numerical simulation was performed to calculate temperature and stress distribution in K9 glass sample irradiated by pulse CO2 laser using finite element method.
利用有限元法对脉冲CO2激光辐照K 9玻璃样品中的温度和应力分布进行了数值分析。
In a. plane rectangular coordinate system, mathematics simulation of the change of moisture content in a corn kernel during tempering is presented by the finite element method.
在平面直角坐标下，利用有限元方法，对玉米颗粒在缓苏过程中的含水量变化进行了数学模拟。
This paper descripes simulation of some kinds transducers using a microcomputer based on the finite element method and sets up the clear mathematic models for the optimum designs.
通过微型计算机，用有限元法计算某类传感器，为优化设计建立一个清晰的数学模型。
A three-element composite piping made of elastic materials was studied with finite element numerical simulation.
用有限元数值模拟法研究了由弹性材料构成的三元复合管道的力学性能。
Based on the experiment, a finite element model was built, and the measures for ensuring the analysis accuracy in the numerical simulation process were introduced.
根据试验提供的条件建立预埋件有限元模型，并介绍了数值模拟过程中为保证分析正确性采取的措施。
A numerical simulation program for flexural load effects of rc beams was compiled based on the theory of reinforced concrete and finite element software ANSYS.
根据钢筋混凝土理论和ANSYS有限元软件编制了实验梁受弯荷载效应模拟计算程序。
The experimental findings have a high reference value. For absence of the finite element numerical simulation, we cannot know each parts detail visually.
但是由于其缺乏精确的有限元数值模拟，所以无法直观地了解各细部受力情况及破坏形态。
The results of equivalent circuit method and finite element simulation show that the structure exhibits obvious left-handed behavior in a specific frequency range.
等效电路与有限元仿真的结果均表明这种结构在特定的频段表现出明显的异向特性。
The results of equivalent circuit method and finite element simulation show that the structure exhibits obvious left-handed behavior in a specific frequency range.
等效电路与有限元仿真的结果均表明这种结构在特定的频段表现出明显的异向特性。
应用推荐