A finite element model of solar round-planetary gear has been established.
建立太阳轮-行星轮的有限元模型。
Base on the theory of layered-slipping, a finite element model has been built with ANSYS.
本文基于斜拉索分层滑移理论，通过ANSYS有限元分析软件进行了索体的参数化建模。
A finite element model for rubber matrix composite structures is developed in this paper.
建立了一个橡胶复合材料结构有限元分析模型。
Then, a finite element model of the cabinet was established for calculating modal analysis.
然后建立了箱体的有限元模型，对其进行了计算模态分析。
Secondly, on the basis of original experimental data, the paper develops a finite element model.
其次，本论文针对车辙试验，在原有试验数据的基础上建立有限元分析模型。
Geometric flaws were simulated by killing the specified elements of a finite element model of joint.
通过杀死焊接接头有限元模型中相应位置的单元，模拟存在的几何缺陷。
The paper proposes a finite element model for predicting the stress distribution based on experiments.
通过比较表明，有限元结果和试验结果吻合得较好，最大应力均发生在圆角附近区域。
A finite element model of large combined tubular reactor with complicate structure and loads was built up.
对结构和所受载荷都非常复杂的某大型组合管式反应塔建立了有限元模型。
First, a finite element model has been established. Then, the model has been validated against test results.
首先根据已知的试验数据建立了有限元模型，进而验证了有限元模型的可靠性。
A finite element model for nonlinear dynamic analysis of reinforced concrete block shear wall is pointed out.
本文提出了配筋砼砌块剪力墙非线性动力分析有限元模型。
A finite element model was built to describe the temperature field in the tundish by using of turbulence theory.
利用湍流理论，建立中间包温度场的数学模型。
A finite element model of the patients' trunk including gravitational forces and a parametric brace model were created.
建立患者躯干的有限元模型包括重力和参数支具模型。
This paper presents a finite element model of local damage in creep and provides the threshold strain for damage elements.
建立了蠕变局部损伤法模型，并给出单元进入损伤态的判据和失效的临界拉伸应变条件。
Then, a finite element model was accordingly developed to simulate ultrasound waves generated by a pulsed laser in the skin.
然后，根据有限元数值分析方法的特点，建立脉冲激光激发皮肤产生超声波的有限元模型；
As illustrated in FIG. 1, at step 102, a finite element model (FEM) representing the physical structure of a heart is generated.
如图1中所示，在步骤102中，产生表示心脏的物理结构的有限元模型(FEM)。
Firstly, a finite element model of the saw-tooth hose assembly that is applied comprehensively in hydraulic engineering is established.
对液压工程应用极其广泛的锯齿型胶管总成建立了力学模型。
According to structural feature of the roller and its axle in rotary kiln, a finite element model of roller-to-axle contact was developed.
根据托轮及托轮轴的结构特点，建立了托轮、托轮轴的接触有限元模型。
It is necessary and useful in engineering to modify a finite element model or some elements of mass and stiffness matrix by using modal test results.
利用试验模态分析结果，对有限元力学模型本身或其中某些参数进行修改是必要的和有工程意义的。
A finite element model of the seamless turnout on simple supported beam bridge was established by regarding the turnout, beam and pier as one system.
将道岔、梁和墩台视为一个系统，建立简支梁桥上无缝道岔的有限元模型。
A finite element model based U-bending benchmark of NUMISHEET '93 has been used to predict springback with contact evolution between the sheet and dies.
基于NUMISHEET93的U形弯曲标准考题，考虑板材与模具间的接触演变过程，建立了一个有限元模型来预测回弹。
A Finite Element model was developed with actual tyre loads to analyze asphalt pavement structural combinations meeting the standards of perpetual pavement.
采用实测轮胎荷载建立有限元模型，分析了满足长寿命路面要求的沥青路面结构组合。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
The problem of a too large size of the mine truck's body structure was solved by a finite element model established by using CAS and FE grid division methods.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效的解决矿用汽车货箱结构和尺寸庞大的问题。
Aimed at the jet noise which is induced by the expand structure and tail tube in the resistant muffler, a finite element model at low Mach number was developed.
针对抗性消声器中扩张结构和尾管引起的射流噪声问题，建立了低马赫数射流噪声有限元分析模型。
A finite element model of human mandible is developed from ct scan images by the technologies of three-dimensional reconstruction, image processing and meshing.
根据人体下颌骨的螺旋CT扫描图像，利用三维重建、图像处理和网格划分技术，建立了人体下颌骨的三维有限元模型。
A finite element model was established to simulate the forming process of double curvature honeycomb sandwich panel under the conditions of "nails die, vacuum".
建立了双曲率蜂窝夹层板在“点阵钉模、真空负压”条件下成形的有限元分析模型。
Moreover, a finite element model is developed and verified against tests, and the results from the finite element analysis agree well with the experimental data.
采用有限元模型对试验进行了模拟验证，计算结果与试验结果吻合良好。
Based on the experiment, a finite element model was built, and the measures for ensuring the analysis accuracy in the numerical simulation process were introduced.
根据试验提供的条件建立预埋件有限元模型，并介绍了数值模拟过程中为保证分析正确性采取的措施。
A finite element model for diaphragm air spring is created, and its dynamic characteristics are simulated and verified by test, with both results coinciding each other.
建立膜式空气弹簧的有限元模型，对其动态特性进行仿真和试验验证，仿真结果和试验结果吻合良好。
A finite element model for diaphragm air spring is created, and its dynamic characteristics are simulated and verified by test, with both results coinciding each other.
建立膜式空气弹簧的有限元模型，对其动态特性进行仿真和试验验证，仿真结果和试验结果吻合良好。
应用推荐