A motion controller with DSP for military operation robot is introduced in this pa-per.
介绍了一种由数字信号处理器构成的军用操作机器人运动控制器。
In the plan of design, the fourth generation of IPM is used as the main half-bridge circuit and TMS320LF240X DSP with good performance and strong function is used as a controller.
在设计方案中，采用第四代IPM作半桥主电路，以性能好、功能强的数字信号处理器TMS320 LF 240 X DSP为控制器。
A demonstration system with DSP as controller used for testing double-axis tracking control techniques is designed by using four-quadrant detector as position sensor.
采用四象限探测器作为位置传感器，设计出以dsp作为控制器的双轴跟踪控制试验演示系统。
A type of open architecture robot controller based on DSP and CPLD is developed.
设计了一种新型的基于DSP和CPLD的开放式机器人控制器。
A design is described in the paper that step motor motion controller is a down location control unit based on DSP kernel.
本文提出了一套基于DSP内核的运动控制器的设计方案。
A digital controller based on DSP is designed for position system of the test bed of ship, which is used for testing the anti-rolling tank.
本文针对研究减摇水舱性能的船舶试验台位置系统，设计了基于DSP芯片的数字控制器。
A hardware design project concerning fuzzy in temperature control system based on DSP was introduced, emphasizing the importance of the software method applied to the fuzzy-PID controller.
介绍了基于DSP的恒温模糊控制系统的硬件设计方案，着重介绍模糊pid控制器的软件实现方法。
Based on the object-orient analysis of CNC system, the paper proposes a design idea of master-slave CNC system, which builds with PC as upper chip and motion controller with DSP as lower chip.
本文在对CNC系统进行面向对象分析的基础上，建立了以PC机作为上位机，DSP运动控制器作为下位机的主从式数控铣床系统。
In this paper, a DSP-based power conditioner systems controller for fuel cell power plant is studied.
文章研究了基于DSP的燃料电池电站功率调节系统控制器。
This paper presents a new method used to implement industrial real-time video controller with DSP and SAA7111AHZ.
本文介绍了一种使用DSP和视频处理芯片SAA7111AHZ实现工业用实时视频控制器的方法。
And then, designed hardware circuit and software flow, realized a sample using TMS320F2812 DSP as kernel controller.
最后，设计了变换器的硬件电路和软件流程。实现了以TMS320F 2812DSP芯片为控制核心的样机。
So, the thesis adopts a type of low loss DSP processor as main controller which composing the control and fault feeder detection system based on DSP in order to deal with the question.
因此论文采用了低功耗的数字信号处理器作为主控芯片，构成一种基于数字信号处理器的控制与选线系统。
A type of full-digital controller using DSP was designed, which was based on analyzing and researching the former controller of high voltage cable patrolled robot.
在分析和研究高压巡线机器人原控制器的基础上，设计了一种基于DSP的全数字化控制器。
CAN-bus for the control scheme and a node control loop are proposed. TMS320LF2407 DSP is used as the node controller.
采用TMS320 LF 2407 DSP作为节点控制器，设计了CAN总线结构中的节点控制回路。
A digital controller for hydraulic servo system based on DSP was designed, where the TMS320LF2407A chip was adopted for the main processor.
基于DSP的液压伺服系统，以TMS320 LF 2407 A芯片为主处理器，设计了一种数字控制器。
It is introduced that a design method of DSP controller which is applied to control Chinese characters and graphics display in a LCD based on inner T6963C controller.
介绍了一种DSP控制器的设计方法，用于对内藏t 6963 C控制器液晶模块进行汉字图形显示控制。
A boundary scan controller with the USB interface is designed. DSP and 74lvt8980 are adopted to control the boundary scan bus.
采用DSP和边界扫描总线控制芯片74lvt8980设计边界扫描测试控制器。
This paper introduces a unified control system for universal power quality controller (UPQC) and its digital implementation based on DSP processor.
文章介绍了通用电能质量控制器的一种统一控制系统及其基于DSP的数字化实现。
In this article, taking routine resistance industry heating furnace as the background, we design a multi-route temperature controller based on DSP chips.
本文以常规电阻工业加热炉为背景，设计了一个基于DSP的多回路温度控制器。
Aim at the problem, a novel inverter control scheme of DSP-based voltage and current dual loop control with repetitive controller embedded is presented in this paper.
针对此问题，本文提出了一种新的基于DS P带重复控制器电压电流双环反馈控制方案。
Design a new digital control system with DSP technology, focus on the dissertation of controller hardware and software structures and implemented on the system.
采用DSP技术，设计了一种新的数字控制系统，着重从控制器硬件、软件结构方面进行了论述，并予以系统实施。
According to the structure character and transmission characteristic of superflexible coaxial cable, this paper presents a controller based on DSP of corrugator for superflexible coaxial cable.
根据超柔同轴电缆的结构特点和传输特性，设计并研制了生产超柔同轴电缆的基于DSP的轧纹机控制器。
Introduced in this paper is a speech controller based on fixed-point DSP ADSP2181, which adopts mel-scale frequency cepstrum coefficient as principal speech recogniti0n parameter.
本文介绍了一个基于定点数字信号处理器ADSP2181的语音控制器，着重讨论了其语音特征参数计算方法。
Based on DSP (digital signal processor) as a control core, a DSP-based study of excitation controller design.
文中以DSP(数字信号处理器)作为控制核心，研究了基于DSP的励磁控制器的设计。
Designing a core controller module based on DSP.
基于DSP而设计了核心控制模块。
The paper introduces the dynamic characteristic and the structure of arc welding power, and gives a method of designing arc welding power which using DSP chip as a controller.
采用状态空间平均法建立了全桥逆变式弧焊电源主回路的平均状态方程，经过线性化处理推导出频域小信号模型。
In this article, to carry the 6-axis motion controller out, a method of using PCI special interface chip PCI9052 to be a interface bridge of PCI bus and DSP (TMS320LF2407), was introduced.
文章介绍了一种采用PCI专用接口芯片pci9052作为PCI总线与DSP (TMS320 LF 2407)的接口桥接器，实现6轴运动控制卡的硬件设计方法。
In the paper, the hardware circuit design of a DSP-based Brushless DC Motor Controller is given, which includes a current loop, a speed position loop, and IPM (Intelligent Power model) driver.
本文提出了一种基于DSP的直流无刷电机控制器的硬件电路，包括电流环、速度位置环和IPM(智能功率模块)驱动的硬件电路设计。
A kind of implementation of traffic signal controller based on DSP is suggested in this paper, and the detailed design of hardware and software is also introduced.
文中提出了一种基于DSP的交通信号控制机的实现方法，同时给出了具体的硬件、软件设计。
A kind of implementation of traffic signal controller based on DSP is suggested in this paper, and the detailed design of hardware and software is also introduced.
文中提出了一种基于DSP的交通信号控制机的实现方法，同时给出了具体的硬件、软件设计。
应用推荐