Here we present a computational method forthe derivation of a lineage tree from single-cell tranome data.
这项工作重，我们提出了一个“从单细胞转录组数据计算和推导细胞谱系树的算法”。
In this paper, a computational method for coplanar disk-shaped cracks within an elastic infinite body is presented.
本文对于含有圆盘状共面裂纹群的无限体提出了一种计算方法。
We get some new conclusions by the matrix theory, then it gives a computational method about the system of fundamental solutions.
文章用矩阵理论得出几个新结论，从而应用新结论得出基础解系的一种算法。
A computational method based on rotor free-wake is developed for predictig flow field between the twin rotors of coaxial helicopters.
在随桨叶旋转的坐标系中，建立了悬停旋翼自由尾迹计算的迭代方法和模型。
A computational method based on rotor free-wake model was developed for horizontal axis wind turbine's aerodynamic performance prediction.
转子自由尾迹模型的基础上开发的计算方法为水平轴风力发电机的空气动力性能的预测。
To predict macroscopic effective elastic moduli of composites, a computational method is established based on micro mechanics finite element method.
为从理论上计算复合材料宏观有效弹性模量，建立了通过细观力学有限元法计算复合材料有效弹性模量的方法。
In this paper, based on the second generation low order panel method, a computational method of potential flow around wings under high-lift configuration is given.
本文采用第二代低阶面元法给出了一种高升力外形下机翼的位流计算方法。
A computational method for rock damage variable is presented based on the stress-strain curve; the acoustic emission test result shows that this method is reasonable.
岩石损伤变量的计算方法，提出了基于应力-应变曲线上的声发射测试结果表明，该方法是合理的。
They developed a computational method that compares how similar the side effects of different drugs are and predicts how likely the drugs act on the same target molecule.
他们开发了一种计算方法，来比较不同药物产生副作用的相同点，并预测不同药物作用于同一分子靶体的可能性。
In this paper a computational method for determining the temperature distribution in the high voltage Winding of dry epoxy resin distribution power transformer is suggested.
本文介绍环氧浇注变压器高压绕组的温度分布计算方法。
In this paper, the problem of the parameter sensitivity in fuzzy reliability analysis is discussed, and a computational method of parameter sensitivity of fuzzy reliability is put forward.
文章讨论了模糊可靠性分析中的参数灵敏度问题，提出了模糊可靠性参数灵敏度的计算方法。
To perfect their system, researchers combined computational and experimental studies to create a method of assessing an optimum vessel configuration.
为完善这个系统，研究员们联合计算机和实验研究来建立一个评估最佳脉管改造的方法。
The Boundary Element method (BEM) is a kind of efficient numerical method in modern computational mechanics.
边界元方法(BEM)是近代计算力学中的一种高效数值方法。
This paper presents a simple and general method for generating adaptive computational grids.
本文提出一种简单通用的自适应计算网格生成方法。
A computational model was presented in estimating residual life of reformer tubes by the method of model.
在应用模型法估计转化管剩余寿命中，本文提出了一个力学计算模型。
By application to a certain tidal river showed that the computational method both in theory and practice were feasible.
通过对某一感潮河流实际计算应用，表明这一新的计算方法在理论上与实践上是可行的。
Using the breaking-point formula and the distance-decay effect, the author develops a quantitative approach called "simple computational method".
根据断裂点公式、距离衰减效应的“简单计算方法”可以定量分析都市区的地域范围。
On the basis of these, we further bring forward a method to decrease the computational complexity of lifting scheme, which is used in JPEG2000 and shows high performance.
在此基础上我们进一步提出了一个减少提升方案计算复杂度的方法，该方法在JPEG2000中取得了良好的效果。
In modeling the electromagnetic induction, based on the principle of domain decomposition, a fast and effective numerical computational method is developed to deal with the volume integral equation.
针对电磁感应测井问题，基于区域分解的原理对体积分方程提出了一种快速有效的数值计算方法。
Based on the computational fluid dynamics, a design method for flow meter is given through numerical simulation and experiment on metal tube rotameter with special structure fixed on the level piping.
通过对适合安装于水平管道的特殊结构的金属管浮子流量计三维湍流流场的数值仿真及实验研究提出一种基于计算流体力学的流量传感器设计方法。
The numerical results obtained from this method show a high computational precision and time saving.
计算结果表明，这是一种精确度高、计算量小的方法。
Numerical results demonstrate that this nonlinear method has comparable high accuracy and, compared to a conventional method, considerably improves computational efficiency.
数值计算结果证明，这种非线性方法具有较高的精度，并且较传统方法计算效率成倍提高。
On the basis of orthorhombic techniques, a computational decoupling method which can be used in the active control analysis of unrestricted elastic structures is brought forward in this paper.
在正交化技术的基础上，本文提出了一种适合于无约束弹性结构主动控制分析的计算解耦方法。
Based on establishing a framework and the evolve model of computational experiment, we propose, in this paper, detail method and results.
文章主要工作包括建立演化计算实验模型，讨论实现方法和结果。
A method is presented by using computational geometry techniques to determine optimal tool position and orientation for 5-axis machining with torus end-mill.
应用计算几何技术来决定优化的刀具定位和刀具姿态以实现环形刀的5轴自由曲面数控加工。
The computational comparison of several different methods for a slope show that the proposed method is reasonable.
几种不同的稳定分析方法对算例所作的比较计算表明，所提方法是合理的。
The detailed distribution of pressure and velocity on the cone obtained after simulating the flow characteristics of a V-cone flowmeter with the computational fluid dynamics (CFD) method is analysed.
运用计算流体力学(CFD)方法，对V锥流量计进行了数值模拟，得到了锥体上的压力和速度的详细分布情况，并对其进行了分析。
A computational problem about indefinite integral in some textbooks pointed out and gave a method to solve it.
指出了一些教科书在不定积分的计算上存在的一个问题，并给出了解决这一问题的方法。
The concept of design compression ratio of real gas in a vortex expander and computational method are put forth. The corresponding experimental study has been done.
对涡旋膨胀机真实气体理想(等熵)膨胀过程进行了理论分析，提出了涡旋膨胀机真实气体设计压比的概念和计算方法，并进行了实验研究。
应用推荐