You will need the device for which you are writing the driver and a null-modem (serial) cable for remote debugging.
需要有一个正在为其开发驱动程序的设备，以及一根串口线来进行远程调试。
For instance, a device serial number field could contain the manufacturer's serial number, an asset tag number issued by the organization that installs it, or something completely different.
例如，设备序列号字段可以包含生产商的序列号、由安装设备的组织指定的资产标号或其他完全不同的内容。
Typically, you connect a serial port to a serial device.
通常，将串行端口与串行设备连接。
The first unused serial device (/dev/ttySx) gets allotted to the card, which can then be accessed as if it where a serial device.
第一个未使用的串行设备（/dev/ttySx）被分配给此卡，然后此卡就可以被当成串行设备访问。
It is important that you use a null modem cable; if you use a typical serial cable, the target computer expects a serial device and not another serial port, and you cannot debug the computer.
有一点很重要，那就是要使用零调制解调器电缆，如果您使用普通的串行电缆，目标计算机则期望与串行设备通信，而不是与另一个串行端口通信，这样您就无法调试该计算机。
Examples of devices at this layer include the SLIP driver over a serial interface or an Ethernet driver over an Ethernet device.
例如，包串口使用的SLIP驱动程序以及以太网设备使用的以太网驱动程序都是这一层的设备。
Furthermore, a USB device might also have string descriptors to provide additional information such as vendor name, device name, or serial Numbers.
并且一台usb设备可能还有字符串描述符以提供像厂商名、设备名或者序列号这样的附加信息。
This is particularly useful if you have a chatty kernel but a bandwidth-constrained console device (such as over a serial port).
如果您拥有一个非正式内核而又使用有带宽限制的控制台设备（如通过串口）， 那么这非常有用。
Additionally, since it is based on a serial interface, SAS allows for increased device support.
因为它基于串行接口，所以SAS允许增加设备支持。
For USB GPRS modems, a USB-to-serial converter typically converts the USB port into a virtual serial port so the rest of the system sees it as a serial device.
针对usbGPRS调制解调器而言，USB - to - serial转换器一般us b端口转换为虚拟串行端口，因此系统其他部分就会将它看作串行设备。
A device attached to a serial port, such as a mouse or a modem, USES the device associated with that port.
对像一个鼠标或一台调制解调器这样的一个串行端口的一个装置附件，使用与那一个埠有关的装置。
RFCOMM is known as the virtual serial port protocol because it allows a Bluetooth device to simulate the functions of a serial port.
RFCOMM称作虚拟串口协议(virtualserialport protocol)，因为它允许蓝牙设备模拟串口的功能。
For example, in a first serial cluster, each intercepting network device could be implemented as a separate serial cluster, or nested serial cluster.
例如，在第一串行群集中，每个截取网络设备可被实现为单独的串行群集或嵌套的串行群集。
The new technology of device server ACTS as a bridge between serial device and network, and can easily implements the protocol transition between them.
新兴的设备服务器技术在串口设备和网络之间架起了桥梁，能方便的实现两者的协议转换。
If possible it is often useful to have a schematic of the serial port of each device in a system.
如果可能，掌握各个设备串口的原理图是很有用的。
Mode of serial port pair: synchronous clock device through the serial port read per second pair a serial output time information, serial port and RS232 interface and RS422 interface.
串行口对时方式：装置通过串行口读取同步时钟每秒一次的串行输出的时间信息对时，串行口又分为rs232接口和RS422接口方式。
As a serial-to-Ethernet converter, the EM203A allows you to quickly network-enable practically any serial device.
作为一个串行到以太网转换器，EM203 A可让您快速的网络，使几乎任何串行设备。
This paper introduces the application of a virtual instrument based on serial communication interface on medical device aiming for monitoring the fetus heart electric signal.
本文介绍了一个基于串行通信接口的虚拟仪器在医疗仪器方面的应用，本系统主要用于胎儿心电信号监测。
The principle and working process of a FM serial resonance device was introduced and its application no AC withstand voltage test of high voltage XLPE insulated cable was also discussed.
介绍一种调频串联谐振装置的原理及工作过程，并在高压交联聚乙烯（XLPE）绝缘电缆交流耐压试验中应用。
The Serial peripheral Interface is a sort of technology with high speed and efficiency, which makes the SPI device convenient in data communication.
SPI接口技术是一种高速，高效的串行接口技术，因而SPI设备在数据通信中应用十分方便。
A method of direct Universal Serial Bus (USB) device access in virtual environment was proposed, and a model of direct device access and work flow based on QEMU were designed.
提出一种在虚拟化环境下直接访问usb设备的方法，并基于QEMU设计实现了虚拟机直接访问真实设备的系统模型及相关流程。
As a serial-to-Ethernet converter, the EM203 allows you to quickly network-enable practically any serial device.
作为一个串行到以太网转换器，EM 203可让您快速的网络，使几乎任何串行设备。
Serial clustering provides additional capacity when network traffic exceeds the processing capabilities of a single network device.
串行群集在网络话务超过单个网络设备的能力时提供额外的容量。
The paper introduced a method that using SIMOREG DC-MASTER 6RA70 rectifying device to realize 12-pulse serial rectification technology and then realize DC speed-regulation control of hoist.
文章介绍了采用西门子SIMOREG DC-MASTER6RA70整流装置实现12脉动串联整流技术、进而实现提升机直流调速控制的方法，并给出了12脉动串联整流驱动参数的设置。
This paper aims at the various problems of the addressing device, from the principle analysis of addressing device, puts forward a method that through serial analysis can solve...
针对可寻址系统存在的问题，通过分析可寻址管理系统的原理，提出了通过串口分析软件解决统一的用户管理系统与可寻址管理兼容问题的方法。
A device and method for reading and authenticating currency serial Numbers to prevent counterfeiting and other money-related crime is provided.
本发明提供了一种用于读取并鉴别货币序列号以防止伪造货币以及其它与货币有关的犯罪的装置和方法。
Because the FT232 chips come with a unique serial number, you can identify the correct device within a multichip environment.
由于FT232芯片出场有一个自己的唯一的序号，你就可以在一个多芯片模块的环境下找出正确的设备。
In this paper, a new kind of constructing a network method base on serial device server is provided during the construction of PLDC of the testing LAB for medical devices.
着重提出了针对医疗器械质量检验实验室构建PLDC过程中采用的一种新兴的组网方式，即基于串口服务器的组网。
In this paper, a new kind of constructing a network method base on serial device server is provided during the construction of PLDC of the testing LAB for medical devices.
着重提出了针对医疗器械质量检验实验室构建PLDC过程中采用的一种新兴的组网方式，即基于串口服务器的组网。
应用推荐