Till now, strip method and 3-d method based on rigid model have been broadly utilized in the engineering practice.
目前，在工程实践中二维切片法和采用刚体模型的三维方法(本文中简称为三维刚体方法)得到广泛的应用。
This provides an excellent method for using the processing power of your client nodes (and graphics cards) to render large 3-D environments quickly.
这提供了一种利用客户机节点的处理能力（和图形卡）来迅速渲染大型3-D环境的绝好方法。
Researchers at North Carolina State University have managed to create a surprisingly simple method for converting 2-d patterns into 3-d printed objects.
北卡州立大学的研究员打算发明一种神奇而又简单的方法来使2d图案变3d。
Disconnect Figure 3 c, d, the use of manometry to circuit (or leakage measurement method) to find the fault has shifted the cylinder.
断开图3中的C、D处，利用、回油路测压法(或测泄漏量法)找到了有故障的转向缸。
A method for measuring 3-d magnetic field of the permanent magnet with three single-dimension Hall probes was proposed.
提出了一种采用3个一维霍尔探头进行三维测量小型永磁体空间磁场的方法。
An analysis was made on the Zhougongzhai arch dam under basic load combination and overloading of hydraulic pressure by use of 3-d nonlinear finite element method.
用三维非线性有限单元法对周公宅拱坝进行了基本荷载组合下的非线性分析和水压超载分析。
Therefore the author built a 3-d model based on the surface equations of roller gear CAM, and presented a method of using coordinate measuring machine (CMM) to measure the surfaces of the CAM.
为此，本文以弧面分度凸轮的轮廓面方程为基础，建立了弧面分度凸轮的三维模型，提出了一种用三坐标测量机测量其轮廓面误差的方法。
A trigonometric projection method based on fixed laser scanning points for measuring 3-d large building is proposed.
提出一种基于固定激光扫描点的三角投影法测量建筑物大目标三维尺寸的方法。
Method Portal hypertension was induced by portal vein stenosis(PVS) in 30 rats subdividing into 3 groups:group B (Model), group C in which L arginine was given, and group D receiving L NAME.
方法采用门静脉部分缩窄（PVS）制成门静脉高压模型的30只大鼠被均分为3组：模型组（B）、左旋精氨酸组（C）、单甲基精氨酸组（D）。
In this paper a new method for measuring 3-d displacements, needle projection method with holographic interferometry, is developed.
本文提出一种新的三维位移测量方法：标针投影全息干涉法。
As for 3-d orthogonal woven composite, a new homogenized eigen-element method is proposed in this paper.
基于三维正交机织复合材料，提出了一种特征单元均匀化分析方法。
We present a mesh convergence test of the 3-d finite difference method for computing the electromagnetic response of a buried conductivity anomaly.
本文用三维有限差分法，在计算电导率异常的电磁响应时作了一次网格收敛试验。
The internal flow field of a single-stage axial compressor is analyzed using a fast full 3-D viscous flow calculating method.
采用一种快速求解三维粘性流场的计算方法求解轴流压气机的内部流场及全工况特性。
The method of monopulse radar 3-d imaging in stepped tracking mode is presented.
该文提出了步进跟踪模式下的单脉冲三维成像方法。
A novel optical 3-d sensing method using sign mosaics is proposed.
提出一种采用标记拼接的新的光学三维传感方法。
A dynamic 3-d surface shape measuring method for a balloon in quickly leaking gas is proposed.
提出一种气球快速泄气过程中动态三维面形的测量方法。
A medical image 3-d fusion method is discussed.
本文讨论了医学图象立体融合的实现方法。
The paper presents a new method for analysing 3-d morphology of craniofacial hard - tissue.
本文介绍了一种用于颅颌面硬组织三维形态分析的新方法。
It is based on the mathematic model, and it has been established the 3-d grooves designing method and developing process for finish cutting stainless steel.
根据三维断屑槽切屑折断数学模型，建立了适合精车不锈钢的三维复杂槽型设计方法及开发流程。
This method enhanced the measuring accuracy by using the methods of wave head counting and zero-cross detection, and it implemented 3-d positioning with triangle square wave.
该定位系统采用波头计数与零交叉点检测的方法来提高超声测距精度，并通过三角形方法来实现三维定位。
Objective: to build 3-d digital face model of unilateral orbital defect and find a new method to get 3-d data of facial defects.
目的：建立活体单侧眼眶部缺损的面部三维数字化模型，探讨颜面部缺损三维数据快速精确采集的新方法。
The 3-d bulk temperature field distribution in cylindrical spur gears is computed by the three-dimensional boundary element method (3-d BEM).
本文首次采用三维边界元法来计算圆柱直齿轮啮合时的三维本体温度场问题。
Finally, isochronal facies-restrained stochastic modeling method is used to build up the 3-d reservoir model.
最后，应用等时相控随机模拟方法建立了三维可视化的储层地质模型。
Firstly, a new mesh generation method for 3-d hydro-elastic analysis is proposed with the combination of 2-d Timoshenko beam theory and 3-d wetted surface mesh generation method.
首先，将二维梁振动理论与三维船体湿表面网格划分方法相结合，提出了一种适用于三维水弹性分析的浮体湿表面网格划分方法。
In this paper, the parallax barrier method is used as a reference to describing 3-d liquid crystal displays.
在这篇文章中，视差格栅法作为参考来描述三维液晶显示器。
Objective To establish a new quantitative analyzing method for myocardial viability evaluation based on the 3-d registration and fusion of the nuclear medicine images.
目的探索建立三维核医学图像配准和融合进行心肌存活评价的定量分析方法。
The 3-d finite element model of bolt is calculated by the method of contact analysis, and the fatigue strength of bolt is checked.
并采用接触分析法对螺栓的应力应变进行了三维有限元计算，对螺栓的疲劳强度进行了校核。
Result: Finally, using 3-D finite element method to model the leakages of an embankment dam, for example.
结果：最后，以土石坝为例，用三维有限元法对堤坝渗漏模型进行了模拟。
The fractional error of 3-D space distance measured with this method excels 0.6%.
根据这种方法实现的三维空间距离测量相对误差优于0.6%。
The var SEC sweep molding method, a universal 3-d design method for disc CAM is presented.
提出一种盘形凸轮三维通用设计方法—可变截面扫描成型法。
应用推荐