The results of 3-d numerical simulation which make use of PC also proved by the results of physical simulation.
以聚碳酸酯为材料的三维数值模拟结果也得到了物理模拟的验证。
The simulated data tallies with the test data, and the feasibility of the 3-d numerical simulation is verified for fan pneumatic design.
模拟结果与试验结果基本吻合，验证了三维数值模拟对于风机气动设计的可行性。
CFD software is used to perform 3-d numerical simulation of steam flow field inside direct air-cooling exhaust steam pipe of a 660 MW supercritical unit.
利用计算流体动力学软件(CFD)，对某660MW超临界发电机组直接空冷排汽管道内的水蒸汽流场进行了三维数值模拟研究。
By means of this method, the 3-D numerical simulation of the test area at Guangzhou Nansha Port is executed, and the results are compared with the test data.
利用该方法对广州南沙港某一试验区进行三维有限元数值计算，并与实测值进行了对比。
The characters of PHSC pipe pile is introduced simply in this paper, and its bearing capacity and load transfer behavior are analyzed by 3-D numerical simulation.
在现场试验的基础上，对预应力高强度混凝土管桩单桩承载力荷载传递特性进行了三维数值模拟分析。
The flow characteristics, eddy structure and energy dissipated mechanism of multi-horizontal submerged jets (MHSJ) are studied by means of 3-d numerical simulation.
采用三维数值模拟，研究了多股多层水平淹没射流的流动特性、漩涡结构和消能机理。
The solidification process of castings were simulated by a software for 3-d numerical simulation of solidification processes. Satisfactory results have been obtained.
应用自己开发的铸件三维凝固过程有限元分析软件包对发动机铸件进行了凝固数值模拟计算，取得了较为满意的结果。
The load-deflection characteristics of inclined excavated foundations of transmission lines in homogeneous soil under lateral loads are analyzed using a 3-D numerical simulation model.
通过数值模拟，分析输电线路倾斜掏挖式基础在水平荷载作用下的荷载挠度特性。
The temperature field and the contamination concentration field were Simulated. Using 2-D numerical simulation model, The effect of thermal discharge on hydrobiont water quality were predicted.
采用平面二维水流、温度场和水质数学模型对流场、温度场和浓度场进行了数值模拟，并对电厂温排水的热影响和水质影响进行预测。
Numerical simulation results show that the optimal preform H/D dimension thus obtained can greatly reduce hammering times and die wear.
数值模拟结果表明获得的预成形H/D最佳尺寸可明显减少模锻锤击次数和模具磨损。
D parametric modeling design and precise numerical flow simulation are realized and the effective and practical research tools for design and improvement of the ports are provided.
实现了参数化的三维造型设计以及高精度的流动数值模拟，为气道的设计与改进提供了高效实用的研究手段。
Wang Haoliang. 2014. three dimensional numerical simulation of discharge characteristics of thunderstorm clouds [d]. Nanjing: Nanjing University of Information Science and Technology.
王昊亮。2014。雷暴云放电特征的三维数值模拟研究[D]。南京：南京信息工程大学。
It is indicated by a numerical simulation of the cantilever flexible shear structural damage identification that only low order modal parameters are needed to identify effectively a structural d...
通过一个悬臂弯剪型结构损伤识别的数值模拟表明，只需低阶模态参数就可有效地识别结构损伤。
The spatial evolution of 2-D disturbances in supersonic sharp cone boundary layers was investigated by direct numerical simulation(DNS) in high order compact difference scheme.
通过直接数值模拟的方法，探讨在超音速边界层的转捩问题中，是否存在和不可压缩流情况相似的产生亚谐波的机制。
This paper firstly introduces a numerical simulation model of Pseudo-3-D seepage system and presents a simultaneous synchronous solution for it.
本文首先介绍了“准三维”渗流系统的数值模拟模型，并为该模型提出了一种联立同步解法。
The distribution of shadowgraph intensities in uniform traveling wave is investigated by means of numerical simulation of 2-d equations of hydrodynamics.
本文通过二维流体力学基本方程的数值模拟，探讨了均匀行进波状态时的阴影强度分布特性。
Some electromagnetic parameters in soft contact continuous casting mold of billet were analyzed through 3-d FEM numerical simulation method.
通过有限元法三维数值模拟，对方坯连铸软接触结晶器系统中的电磁参数进行了计算。
A 2-d tidal flow mathematical model of Xinghua Bay based on irregular triangular grid finite difference method was set up and numerical simulation of tidal flow field was carried out.
建立了基于不规则三角形网格有限差分法的兴化湾二维潮流数学模型，对兴化湾潮流场进行了数值模拟。
Through a comprehensive analysis on various dynamic monitoring data and a large amount of fine numerical simulation study of dense grid, it makes clear the residual oil d...
通过各种动态监测资料综合分析和密网络大规模精细数值模拟研究，搞清了剩余油分布状况。
Besides, the numerical simulation of elastic wave fields for 2-d and 3-d homogeneous cases and the inhomogeneous case are also presented in the study.
同时对二维和三维均匀介质以及二维非均匀介质中的弹性波传播进行了数值模拟。
An iterative method numerical simulation of 3-D flow-field was put forward, based on the interaction between flow-field and turbine rotational speed.
根据侧进气涡轮电机的涡轮转速与流场相互影响的特点，文中提出一种将三维流场数值模拟与电机动力学分析相结合的迭代模拟计算方法。
A numerical simulation is presented for 3-d filling progress of engine cylinder head casting.
应用数值模拟的方法研究了发动机缸盖铸造的三维充型过程。
The prevailing software numerically simulates a 2-D internal steady flow of the ramjet inlet-isolator; the numerical simulation results of the state of start in the ramjet inlet are presented.
对超声速冲压发动机进气道—喉道段进行了二维稳态流场数值模拟，给出了反压与攻角变化对冲压发动机进气道起动状态影响的数值模拟结果。
To simulate 3-d wave rapidly and effectively, a numerical simulation model of fully nonlinear waves was established using the high order spectral method.
为快速有效地模拟三维波浪问题，采用高阶谱方法建立了完全非线性波浪的数值计算模型。
To simulate 3-d wave rapidly and effectively, a numerical simulation model of fully nonlinear waves was established using the high order spectral method.
为快速有效地模拟三维波浪问题，采用高阶谱方法建立了完全非线性波浪的数值计算模型。
应用推荐