并以齿轮渐开线轮廓的数控加工编程为例说明了它的应用。
This article illustrates its application by the NC programming of gear involutes profile.
本文采用较小基圆渐开线代替齿轮渐开线，创造出新的渐开线成形砂轮修整器。
This paper presents a new method of form-grinding of involute gears, using a segment of involute curve produced by a smaller base circle disk to replace a desired involute curve.
齿轮渐开线样板和螺旋线样板是齿轮参数的标准计量器具，分别用于齿轮仪器渐开线、螺旋线参数的校准。
The gear involute master and helix master are measurement standards and usually used to calibrate the involute and helix parameters of gear equipments.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
本文对渐开线点啮合齿轮减速器进行了性能试验、接触疲劳强度和弯曲疲劳强度试验，同时还进行了铁谱分析。
This paper describes the performance test, contact fatigue strength test and bending fatigue strength test on the gear reducer of involute point contact Ferrographical analysis is made.
本文以标准渐开线直齿圆柱齿轮作为研究对象。
The standard involute cylinder gear is studied in this paper.
渐开线齿形的内啮合齿轮，在小齿轮和内齿轮中间有一块月牙形状的隔板，目的是把吸油腔和压油腔隔开。
Involute profile of internal gear, in the small gear and internal gear intermediate have a crescent shape of the diaphragm, the purpose is the oil absorption cavity and pressure oil cavity off.
最后给出了渐开线齿轮传动设计的计算结果实例。
At last, the result of the involute gear driving design is described.
内啮合齿轮泵有两种齿形即：渐开线齿形和摆线齿形。
Internal gear pump has two kinds of tooth profile namely: involute profile and cycloidal tooth profile.
实践证明该方法为其它CAD二次开发平台绘画渐开线齿轮提供可借鉴之处。
In practically, it proofs that this method has reference value for drawing involute gear in other CAD further development platforms.
偏心渐开线齿轮传动设计的纯滚动模型、等转角模型和等分模型存在模型误差。
The pure rolling model, equal turning Angle model and bisection model for the design of eccentric involutes gears transmission have model error.
提出了任意转角位置的渐开线齿轮齿廓的参数方程。
The parameter equation of involute tooth profile on any angular position is presented.
根据渐开线球齿轮的仿形加工原理，设计一种具有渐开线齿廓的指状铣刀。
According to the principle of profiling machining of involute spherical gears, this paper designs the accurate involute profile curve of its finger milling-cutter.
齿轮箱：200渐开线圆柱斜齿轮，铸造合金钢活塞。
D. Gear box: 200 Involute cylinder Bevel wheel, cast alloy steel piston.
由于该齿轮的齿根厚度比普通渐开线齿轮的齿根厚，并且节点附近不相接触，因此，其轮齿弯曲强度和接触强度都提高。
Because of the tooth thickness of the dedendum is larger than that of the common involute gear and the Pitchs do not contact each other, the beam strength and surface strength of tooth are increased.
本文介绍了用微机和CAXA- 97软件进行渐开线齿轮范成实验的步骤和范成实验时齿轮插刀设置方法。
In this paper we introduce to the meshed experiment step on involute gear tooth profile by CAXA - 97 software and set up a method of gear cutting tool in the experiment of meshing and cutting gear.
根据渐开线齿轮的原理和渐开线的基本性质，介绍渐开线齿轮齿廓的形成。
On the base of principle of involute gear and its property, the formation of tooth surface are introduced.
渐开线齿廓根切现象是齿轮传动中一个重要的问题。
Undercutting phenomenon is an important problem in gear transmission.
利用UG/NX的二次开发模块和参数化建模技术实现了渐开线齿轮参数化设计。
Development parametric design of the gear is realized by using UG/NX second development and parametric modeling module.
在齿轮传动领域内，至今依然普遍认为，只要主动齿轮的输入扭矩保持恒定，渐开线齿轮支座就不会产生振动。
Up to now, it has universally been thought that provided the input torque of the driving gear of the involute gearing keeps constant, its supports do not vibrate.
发明了渐开线环形齿球齿轮机构。
运用渐开线展开和曲线包络原理，建立了双渐开线齿轮端面齿廓数学模型，用数据验证了模型的准确性。
The outspread principle of involute and enveloping principle of curve is applied to build the model of double involutes gear contrate profile, the veracity is verified by the data.
该方法可以提高渐开线齿轮造型精度与效率，从而为渐开线齿轮的有限元分析提供了必要条件。
This approach can improve modeling precision and efficiency of producing involute gear, and provide necessary condition for finite element method analysis of involute gear.
论文首先对目前常用的几种齿轮性能进行了分析，比较了渐开线与摆线齿轮的滑动系数，渐开线与圆弧齿轮的弯曲应力和接触应力。
Firstly, the performance of several kinds of gears that is commonly used in present is analyzed. the sliding coefficients of the involute gear and the cycloidal gear are compared.
提出用圆弧来代替渐开线齿形的近似方法，实现了渐开线齿轮三维实体造型的直接编程生成技术。
In this paper, an approximate method of using three tangent arcs to substitute the involute gear profile curve is put forward.
结果表明，复合齿形齿轮比渐开线齿形齿轮具有更高的弯曲强度。
The results are compared to those of the standard involute gear and proof that the bending strength of the composite profile tooth is higher than that of involute one.
结果表明，复合齿形齿轮比渐开线齿形齿轮具有更高的弯曲强度。
The results are compared to those of the standard involute gear and proof that the bending strength of the composite profile tooth is higher than that of involute one.
应用推荐