研究了高锰钢合金化对组织的影响。
The effect of alloying high manganese steel on microstructure has been studied.
介绍高锰钢斗齿焊接的一种新方法。
A new method of welding high Mn steel bucket teeth was introduced.
对微合金化高锰钢衬板断裂原因进行了分析。
The fracture reasons of lining plate of microalloying high Mn steel have been analyzed.
用于露天煤矿大型托轮的高锰钢属于难加工材料。
Austenitic manganese steel, which serves as large riding wheel at open-cut coal mine, belongs to hardworking material.
研究了变质和弥散处理对高锰钢组织和性能的影响。
The effect of modifying and dispersion treatment on the structure and properties of high Mn steel is studied in this paper.
高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊。
Used for surfacing welding high-Mn steel, including various part of heavy impact abrasion resistance.
经过分析，确定了组织和力学性能最佳的一种改性高锰钢。
From the subsequent analysis, one kind of modified Hadifield-steel with good microstructure and optimal mechanical property was obtained.
碳钢钢轨与高锰钢辙叉的焊接难度很大，仍属国际性难题。
It is very difficult to welding a high carbon steel rail and a high manganese steel frog, which is still a worldwide puzzle.
对断裂的高锰钢履带板进行了化学成分、断口和金相分析。
The fractured caterpillar board of high manganese cast steel was analyzed for chemical composition, fracture and microstructure.
主要研究了深冷处理对超高锰钢组织、性能及耐磨性的影响。
The influences of cryogenic treatments on the microstructure, material performances and the impact wear resistance of the superhigh manganese steel are studied.
在伴有冲击的热强碱腐蚀磨损工况，高锰钢有过早失效的危险。
Under hot concentrated caustic impact-corrosion-abrasion conditions high Mn steel may be failure in earlier time.
对高锰钢微合金化提高耐磨性的机理及有关工艺作了详细介绍。
The mechanism that increases the wearability for microalloying of high manganese steels and the concerned processes is introduced in this paper.
通过冲击试验，研究了水韧处理质量对高锰钢低温韧性的影响。
The effects of water toughening quality on the toughness at low temperature of high-manganese steel was studied using impact -tests.
结果表明：铸造复合中锰奥氏体钢的耐磨性是高锰钢的5.41倍。
The results show that the wear resistance of casting composite medium manganese steel is 5.41 times that of Hadfield steel.
只要材料成型及控制工艺得当，用该成分的高锰钢生产衬板是可行的。
It is feasible that use this high Mn steel to produce lining plate so long as the forming and controling processes of materials are suitable.
采用元胞自动机与有限元相耦合的方法模拟厚断面高锰钢铸件凝固组织。
Solidification microstructures in heavy section high manganese steel casting were simulated using coupling cellular automaton(CA)and finite element method(FEM).
而假如变紫红色：无磁性的为高锰钢，有磁性的通常为通常钢或低合金钢。
And if the purple red: nonmagnetic as high manganese steel, magnetic usually usually steel or low-alloy steel.
研究了铬加入高锰奥氏体钢中后，原奥氏体高锰钢组织中出现的一种新相。
The austenite manganese steel when added to with Chromium element appears a new phase.
利用传统的喷丸技术对高锰钢表面喷丸处理，研究材料表层的组织结构特征。
The high manganese steel was processed by the conventional shot peening technology, and the surface microstructure was characterized.
工业实验表明，复合变质处理高铬铸铁锤头的耐磨性约是高锰钢锤头的4倍。
It was found by industrial experiments that the wear resistance of the crusher hammers is about 4 times higher than that of the high manganese steel crusher hammers.
通过理论分析和系列冲击试验，对高锰钢出现的低温脆性损坏进行了分析研究。
The study of damage of low temperature brittleness on high manganese steel has been carried out by theoretical analysis and a series of impact tests.
结果表明，在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
消失模铸造生产大型高锰钢颚板，并按设计的工艺要求进行生产，利用余热水韧处理。
Large scale high manganese steel alligator board produced by EPC process can meet the request of design, and use with hot remained water toughening treatment.
另一种以镁橄榄石粉为耐火材料，加少量纤维状矿物，改善透气性，用于高锰钢铸件。
The other for high Mn steel castings, consists mainly of forsterite powder with a few addition of fibre-like mineral both additions are used for improving permeability.
破碎壁、轧臼壁采用进口高锰钢制作，极大降低磨耗，使用年限提高70% - 90%。
Broken walls, rolling ace tabular wall made of imported high-manganese steel, greatly reducing wear, the useful life by 70% -90%.
装机试验表明，该材质锤头使用寿命比高锰钢高，特别是铸态中锰钢锤头寿命可提高60%。
The field tests indicated the service life of this alloy steel hammer is higher than high manganese steel, especially the cast can be raised to 60%.
结果表明，在中、低冲击磨料磨损条件下，试验钢的耐磨性优于中碳低合金耐磨钢和高锰钢。
Under lower and medium impact energy, the abrasive wear resistant performance of the steel metioned is higher than that of low alloyed medium carbon wear resistant steel and high manganese cast steel.
确定了含锰20%的高锰钢中大量的孪晶关系和形变时诱导出的马氏体有明显的取向选择性。
Plenty of twin relationships are determined in the 20%mn steel and there exists the dependence of the formation of martensite induced by deformation on grain orientations of austenite.
生产性试验表明，该涂料用于生产碳钢、高锰钢、铸铁及铜合金铸件均可获得令人满意的结果。
The results show that it can be used in carbon steel, high manganese steel, iron or cuprum alloys castings.
当冲击功为2.0J时，改性高锰钢的冲击腐蚀磨损机理为挤出棱加工硬化造成的材料剥落。
When impact power is 2.0 J, the impact-corrosion and abrasion mechanism of the steel is characterized by spalling of extruded hardened edge.
应用推荐