迄今为止，高碳合金钢材料的焊接理论仍未完善。
Up to now, the welding theory for high carbon alloy steel has not been well established.
在研究的基础上改进了高碳合金钢细长轴的磨削工艺，克服了表面烧伤现象。
The research, has improved grinding technology of high-carbon alloy steel slender axis, and the phenomena of exiguous flaws were overcomed.
本文针对焊缝熔敷金属在高强时，容易开裂问题展开研究，研制了中、高碳合金钢工件表面修复的高强、高韧新型堆焊焊条。
The high strength and high toughness hardfacing covered electrode to the medium-high carbon alloy steel surface' repair was put forward in this paper.
介绍了用高碳铬铁渣做造渣剂冶炼锰硅合金的生产实践。
The practice of smelting ferromanganese silicon with slag of high carbon ferrochrome is introduced.
结果表明，碳显著的影响低碳高合金钢的组织和性能，而以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that carbon influences structure and properties of LCHA significantly, and substitution for nickel with manganese may result in expected structure and properties.
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
硅锰合金、电炉高碳、锰铁、低度锰铁冶炼销售。
Guimeng alloys, an electric high-carbon, ferromanganese, low ferromanganese smelting sales.
研究了硅和等温淬火工艺对高碳低合金马氏体-贝氏体钢金相组织与机械性能的影响。
The effect of silicon and isothermal quenching process on the microstructure and mechanical property of the high-carbon low alloy martensite-Bainite steel was studied.
结果表明，以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that LCHA with Mn in place of Ni could gain the anticipated structure and performance.
本文就对以锰代镍制取低成本低碳高合金钢，以及锰元素对其组织与性能的影响作了一些探讨。
This article use Mn to replace Ni to make low-cost LCHA, and the effect of Mn on structure and properties of LCHA was discussed following.
通过真空感应炉模拟实验，结合金相分析，研究稀土对于高碳重轨钢奥氏体晶粒尺寸和珠光体片层间距等的影响作用。
Via vacuum induction furnace and metallographical analysis, the effects of RE on the grain size of the austenite and distance of the pearlite laminae of high-carbon steel for heavy rail were studied.
制造：工业硅、金属镁、电石、高碳铬铁、硅铬合金、中低微碳铬铁。
Manufacturing: industrial silicon, metal magnesium, calcium carbide, high-carbon ferrochrome, silicon chromium alloys, low carbon ferrochrome China.
对所研制的高碳低合金耐磨钢的强韧化、耐磨性及磨损行为进行了研究。
Experiments were carried out upon the hardening and toughening, wear resistance and abrasive behaviour of the low alloyed high carbon wear resistant cast steel.
该方程不仅适合微合金中碳钢的铁素体和珠光体组织，而且也适合高碳微合金钢的珠光体组织和低碳微合金钢的铁素体组织。
The equations suit not only ferrite and pearlite in microalloyed medium carbon steel but also pearlite in high carbon microalloyed steel and ferrite in low carbon microalloyed steel.
本文介绍采用高碳中铬合金钢作为磨机衬板材料，按照正交设计法优选热处理工艺参数，得到材料韧性和硬度的理想配合。
The mill Liners of high-carbon medium-chromium alloy steel have ideal coordination of toughness and hardness after optimum heat treatment determined by cross-design.
针对这一情况，提出了采用高碳锰合金钢锤头、低合金钢锤头及复合锤头。
Aimming at this situation, it introduces applying hammers of alloy steel with high carbon and manganese content and low alloy steel and composite hammers.
结果表明，2.0J冲击功条件下，中碳合金钢、低碳高合金钢均以浅层剥落为主，抗冲击腐蚀磨损性能相近；
Results show that the leading mechanisms of both alloys are shallow flaking under 2.0 J impact work, and the anti-impact-corrosion wear are close.
介绍了应用DV - 4光电光谱仪，仅用一种测定条件，测定高合金钢中碳、硫、磷、锰、硅、铬、镍、钼、钒、钨、钛、铌、铝元素的含量的方法。
The method of measuring c, s, p, Mn, Si, Cr, Ni, Mo, V, W, ti, Nb, Al element content by DV-4 photoelectric spectroscope on one condition is introduced.
其综合作用使碳极氩气拘束电弧堆焊稀释率低，合金元素过渡系数高。
The synthesis results are that the dilution rate of surfacing of carbon electrode arc constrained by argon is low and the transfer coefficient of alloy elements is high.
研究了转炉中铬渣生产高铬低磷微碳铬铁，实验证明：工艺可行，缺点是合金不能脱硫。
The study is conducted on producing extra-low FeCr containing high chromium and low phosphorus with converter MC FeCr slag.
制造：工业硅、金属镁、电石、高碳铬铁、硅铬合金、中低微碳铬铁。
Manufacturing: industrial silicon, metal magnesium, calcium carbide, high - carbon ferrochrome, silicon chromium alloys, low carbon ferrochrome China.
比较两种材料试样在一定时间内的失重变化情况，表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
在改进的MLD - 10型冲击腐蚀磨损试验机上，选择三种不同的冲击功，对以锰代镍的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
Under three different impact energy, LCHA with Mn in place of Ni were tested with a modified MLD-10 wear tester to investigate their behavior of corrosive impact abrasion.
高碳高速钢是取代普通耐磨合金制造轧辊的新材质，淬火高速钢辊套硬度高，内孔加工性能差。
High carbon high speed steel (HSS) is a new material replacing common wear resistant alloy. Quenched high speed steel roll sleeve has high hardness and poor workability.
用高碳微合金非调质钢试制了捷达轿车发动机连杆。
High - carbon microalloyed engine connecting rods for Jetta car were prepared by controlling steel metallurgy, forging process and cooling process.
在改进的MLD - 10型冲击腐蚀磨损试验机上，对不同成分的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
LCHA with several variations of composition were tested with a modified MLD-10 wear tester to investigate their behavior under corrosive impact abrasion.
结果表明，在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
给出了高碳高合金模具钢强韧化的一种新方法。
This process is a new method for raising the strength and ductile of high carbon and alloy die steels.
给出了高碳高合金模具钢强韧化的一种新方法。
This process is a new method for raising the strength and ductile of high carbon and alloy die steels.
应用推荐