高尔凡(锌铝合金)，又分为锌- 5%铝-混合稀土合金钢丝和锌- 10% -铝混合稀土合金钢丝。
Gao Erfan (zinc aluminum alloy), and divided into zinc -5% aluminum alloy steel wire and zinc alloy -10% - mixed rare earth alloy steel wire.
结果表明，碳显著的影响低碳高合金钢的组织和性能，而以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that carbon influences structure and properties of LCHA significantly, and substitution for nickel with manganese may result in expected structure and properties.
高尔凡钢丝，低碳钢丝的镀锌层是合金，合金成分5%铝-混合微量稀土合金锌层。
Galfan wire, galvanized low carbon steel wire is 5% aluminum alloy, the alloy composition mixed trace rare earth zinc alloy layer.
矿山、水泥、冶金、重型设备、桥梁工程、重型汽车等系列，碳钢、合金钢、高合金钢铸钢件。
Products: series of casting for mine, cement, metallurgy, heavy duty equipment, bridge project, heavy duty auto etc. , Which including of cast steel, alloy steel, height alloy cast steel.
高功率激光焊接合金材料时，常常导致焊缝合金元素的损失，从而影响焊缝的组织和性能。
The use of high-power density laser beam to weld many alloys often leads to appreciable changes in the composition and properties of the weld metal.
异型非标产品系列：合金长条、六方块、军工用钨基高比重合金制品等。
Special type non-standard products: Rectangle type and hexahedron type of hard alloy products and tungsten base high specific alloy products for military application.
为了获得性能优良的电化学沉积合金薄膜，需要精度非常高的合金薄膜铜衬底。
To obtain the amorphous alloy films with superior properties by electrochemical deposition, the accuracy requirement of copper substrates is extraordinarily strict.
采用粉末冶金技术制备了一种低膨胀高导热支撑材料(简称DG合金)，研究了烧结工艺对合金组织和性能的影响。
A support material with low expansivity and high conductivity, called DG alloy, was prepared by powder metallurgy. The effects of sintering process on its properties and microstructure were studied.
结果表明氢爆碎的吸氢速度和吸氢量与钕铁硼合金铸锭表面的活性有关，表面新鲜、活性大的合金铸锭氢爆碎的时间短、效率高。
The results show that the reactivity and the amount of hydrogen absorption in the HD process are related to the surface activity of the bulk alloy so that fresh active bulk has higher efficiency.
该方程不仅适合微合金中碳钢的铁素体和珠光体组织，而且也适合高碳微合金钢的珠光体组织和低碳微合金钢的铁素体组织。
The equations suit not only ferrite and pearlite in microalloyed medium carbon steel but also pearlite in high carbon microalloyed steel and ferrite in low carbon microalloyed steel.
对于高合金化的高温合金，激光快速成形过程中易于出现裂纹等缺陷，成为影响其进入实际应用的主要障碍之一。
Cracks easily form during the Laser Rapid Forming process of high alloying superalloy, which becomes an limitation for the technique coming into use.
多主元高熵合金是一种新型的合金材料，是多种元素处于领导地位的合金。
High entropy alloy is a kind of advanced alloy, which multiple elements are in the leading positions.
薄片形状的磁性合金颗粒材料由于强形状各向异性可使其自然共振频率大大提高，有利于获得微波高磁导率磁性合金。
Flaky morphology of magnetic alloy particle material can raise its natural resonance frequency because of strong shape anisotropy, which is advantageous to acquiring high microwave permeability.
M 5合金是一种适用于高燃耗组件的新型锆合金，主要用作燃料棒包壳、端塞、导向管和定位格架材料。
M5 alloy was a new zirconium alloy used in high burn up assembly such as fuel cladding, end plug, guide tube and grid spring and so on.
ZA27合金强度高、铸造性能优越熔化时能耗低、基本上无污染，是一种很有前途的工程合金。
ZA27 alloy is of high strength, excellent castability and of low energy consumed and pollution free. ZA27 alloy isa excellent engineering alloy.
采用常规铸造方法，向ZA155高锌镁合金熔体中加入适量富铈混合稀土获得了稀土合金化的高锌镁合金。
Rare-earth alloyed high zinc magnesium alloy was obtained by adding proper Ce-rich misch metals into high zinc ZA155 magnesium alloy under conventional condition.
高铬钼抗磨合金本质为亚共晶型高合金白口铸铁。
High chromium-Molybdonum wear-resistant alloys are hypoeutectic white cast iron.
钼是一种宝贵的稀有高熔点金属，是生产合金刚、不锈钢、耐热钢和合金铸铁的重要合金化元素。
Molybdenum is the rare metal with high melting point, which is often used to prepare alloy steel, refractory steel and stainless steel.
铝铜合金由于重量轻、机械强度高而得到广泛应用。 然而，由于铜的存在使铝铜合金的演技氧化变得困难。
Aluminum-copper alloy has been widely adopted for its low weight and high mechanical strength, but the existence of copper makes the anodizing of aluminum-copper alloy difficult.
结果表明，2.0J冲击功条件下，中碳合金钢、低碳高合金钢均以浅层剥落为主，抗冲击腐蚀磨损性能相近；
Results show that the leading mechanisms of both alloys are shallow flaking under 2.0 J impact work, and the anti-impact-corrosion wear are close.
研究表明：低的氧含量水平和高的过热度有利于提高该合金的玻璃形成能力，形成完全非晶的合金；
The results show: low oxygen content and enough large overheating level can improve the glass formation ability of the present ahoy.
因此输送硫酸的泵阀通常采用高硅铸铁（铸造及加工难度大）、高合金不锈钢（20号合金）制造。
Thus transport of sulfuric acid pump usually high silicon cast iron (casting and processing is very difficult), high-alloy stainless steel (alloy No. 20) to create.
目的：比较铸造高金合金基底、铸造TILITE合金基底、铸造镍铬合金基底烤瓷冠的临床应用效果。
Objective: To evaluate the clinical effect of Ni-cr alloy, high-gold alloy and TILITE alloy porcelain crowns.
对于高温碱液多采用钛及钛合金或者高合金不锈钢。
Lye for the use of high-temperature titanium and titanium alloy or high alloy stainless steel.
针对这一情况，提出了采用高碳锰合金钢锤头、低合金钢锤头及复合锤头。
Aimming at this situation, it introduces applying hammers of alloy steel with high carbon and manganese content and low alloy steel and composite hammers.
结果表明，该技术在表面合金化技术领域中，是适合于高熔点金属表面合金化和采用高熔点金属对铁基或某些熔点较高的有色金属表面进行合金化的实用工艺。
The results show that the technology is fit for high melting point metal surface alloying and surface alloying in surface of high melting point metal and some coloured metal.
研究了在熔模精密铸造中过滤净化碳钢、低合金钢和高合金钢等铸钢件的过滤新技术。
A new filtration technique for purification of carbon, stainless, high speed, low and high alloy steel castings in investment casting was investigated.
在常规铸造条件下，向高锌镁合金熔体中加入适量混合稀土获得高锌镁合金。
The high zinc magnesium matrix composite was fabricated by adding mix race earth into the molten high zinc magnesium alloy using common casting.
在常规铸造条件下，向高锌镁合金熔体中加入适量混合稀土获得高锌镁合金。
The high zinc magnesium matrix composite was fabricated by adding mix race earth into the molten high zinc magnesium alloy using common casting.
应用推荐