难加工的高合金铸铁。球墨铸铁。
难加工的高合金铸铁。
给出了高碳高合金模具钢强韧化的一种新方法。
This process is a new method for raising the strength and ductile of high carbon and alloy die steels.
研究了加热温度对高合金耐磨铸铁耐磨性的影响。
The effect of heating temperature on abrasion resistance of high alloy wear-resistant cast iron was studied.
高铬钼抗磨合金本质为亚共晶型高合金白口铸铁。
High chromium-Molybdonum wear-resistant alloys are hypoeutectic white cast iron.
注：1、对于高合金及非铁内件通常不加腐蚀余度。
Notes: 1. Generally no corrosion allowance is added for high alloy and nonferrous internals.
对于高温碱液多采用钛及钛合金或者高合金不锈钢。
Lye for the use of high-temperature titanium and titanium alloy or high alloy stainless steel.
对于高温碱液多采用钛及钛合金或者高合金不锈钢。
The high temperature lye use of titanium and stainless steel alloy titanium or high.
种新的生产高合金孔型轧辊的方法或许会在小型轧辊上采用。
The steel and semi-steel rollers with cast grooves decrease the expense of material. It may become a new method for manufacturing small sized Hi-alloy groovesd rollers.
结果表明，以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that LCHA with Mn in place of Ni could gain the anticipated structure and performance.
该柱塞包括一个实心螺旋轴、锥形芯轴的机头和优质高合金活门。
The plunger consists of a solid spiral mandrel, tapered mandrel nose, and premium high-alloy dart.
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
微量稀土改善高合金耐热钢热强性有一定的普遍性，且是其他元素无法取代的。
The results mentioned above provide a certain universality. The role of the micro alloying with RE to accomplish this improvement of steel properties cannot be replace…
高合金工具钢的焊接性能较差，但高合金工具钢的焊接在工业上有较广泛的应用。
Weldability of high alloy tool steels is analyzed, the application of fusion welding, brazing and solid-state welding in the welding of high alloy tool steels had been summarized.
径向锻造可获得全截面细晶材料，并实现高合金难变形材料由锭到材的一火次锻造。
The gross section fine grain material can be obtained by radial forging. One heat forging from ingot to finished products of high alloy with hard deformation can be realized.
对于高温高浓醋酸或含有其它腐蚀介质等苛刻要求时，可选用高合金不锈钢或氟塑料泵。
The high temperature and high concentrated acetic acid or contain other corrosive media, and other harsh requirement, the choice of high-alloy stainless steel or plastic pump fluoride.
在普通高铬铸铁的基础上，研制了一种用于制造螺旋分级机小叶片的高合金耐磨铸铁材料。
Based on the ordinary high chromium cast iron foundation, designed one kind of high alloy abrasion-resisting cast iron material which is used to make the lining iron of the screw grader.
锥形阀塞经过精密研磨，采用硬化高合金材料或一种镀层不锈钢，确保紧密密封和操作容易。
The tapered plug is precision ground from hardened high alloy material or an overlaid stainless to assure a tight seal and easy operation.
研究了热处理对高合金铁基堆焊层组织和硬度的影响，所得结果对其应用有一定的指导意义。
The effect of heat treatment on structure and hardness of high alloy iron based hardfacing layer metal was studied and the result obtained is of guiding significance for it's application.
本文就对以锰代镍制取低成本低碳高合金钢，以及锰元素对其组织与性能的影响作了一些探讨。
This article use Mn to replace Ni to make low-cost LCHA, and the effect of Mn on structure and properties of LCHA was discussed following.
矿山、水泥、冶金、重型设备、桥梁工程、重型汽车等系列，碳钢、合金钢、高合金钢铸钢件。
Products: series of casting for mine, cement, metallurgy, heavy duty equipment, bridge project, heavy duty auto etc. , Which including of cast steel, alloy steel, height alloy cast steel.
因此输送硫酸的泵阀通常采用高硅铸铁（铸造及加工难度大）、高合金不锈钢（20号合金）制造。
Thus transport of sulfuric acid pump usually high silicon cast iron (casting and processing is very difficult), high-alloy stainless steel (alloy No. 20) to create.
因此输送硫酸的泵阀通常采用高硅铸铁泵(铸造及加工难度大)、高合金不锈钢泵(20号合金)制造。
Therefore transportation of sulphuric acid valve is usually a high silicon iron pump (casting and machining difficult), high-alloy stainless steel pumps (on the 20th alloy) manufacturing.
采用光学显微镜、扫描电镜观察和力学性能测试研究了熔渗处理对高合金铁基材料显微组织和性能的影响。
The effect of infiltration process on the microstructure and properties of iron-base materials with high alloying elements content was studied by metallography, SEM and mechanical property tests.
结果表明，碳显著的影响低碳高合金钢的组织和性能，而以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that carbon influences structure and properties of LCHA significantly, and substitution for nickel with manganese may result in expected structure and properties.
在复合侧高合金焊接之前，如果要对打底焊道在全长上进行射线检测，则事先经买方同意后可忽略此项要求。
Where backing welds are radiographed for their full length to meet code requirements before clad side high alloy welding is done, this requirement may be omitted with prior approval of the Purchaser.
对于高合金化的高温合金，激光快速成形过程中易于出现裂纹等缺陷，成为影响其进入实际应用的主要障碍之一。
Cracks easily form during the Laser Rapid Forming process of high alloying superalloy, which becomes an limitation for the technique coming into use.
由此产生的钢似乎达到了强度和韧性的结合，这与合金含量非常高因而非常昂贵的现代钢相当。
The resulting steel appears to achieve a combination of strength and toughness that is comparable to that of modern steels that are very rich in alloy content and, therefore, very expensive.
在一个案例中，业内高管发现一种号称纯金的涂层其实是一种复杂的合金，含有锇、铱、钌、铑等稀有金属。
In one case, executives discovered a coating advertised as pure gold that masked a complex alloy, which included rare metals such as osmium, iridium, ruthenium and rhodium.
虽然价格高，但振动台显示，该合金一旦放置在支撑桥梁的最佳位置，地震时就可以节省重造桥梁的成本。
They are expensive, but the shake table shows where they can best be deployed to keep costs down while keeping Bridges up.
应用推荐