不幸的是因为我们无法体验(并测量)其它宇宙(如果存在的话)中的基本常量，因此我们无法验证这些理论，所以说这是一个推测性的研究。
Unfortunately we are unable to test any of these theories as we cannot experience (and measure) the fundamental constants in alternate universes (if they exist), so this is a speculative study.
当多组听力测试结果平均下来，超过一半的明显噪音性听力损失(现象)消失了，这一发现验证了(前述的)测量误差的存在。
When the results of multiple hearing tests were averaged, more than half of the apparent noise induced hearing losses disappeared, a finding consistent with measurement error.
使用天平和仪表以及视觉验证，称重，测量和检查生产样品，评估与规格的一致性。
Weigh, measure and check production samples to assess conformance to specifications using scales and gauges and by visual verification.
对圆柱正截面和量块表面的测量试验验证了该测量系统对自由曲面和金属强反射表面测量的可行性。
Through measuring cylindrical section and surface of gauge block, this system is viable to measure free-form surface and high-reflective metallic surface.
进行了相应的声场测量，测量结果验证了理论计算的正确性。
The results of theoretical calculation for the sound decay is validated by experiments.
通过铣削实验和对加工表面的测量，验证了上述模型的正确性。
The models mentioned above are verified by means of milling tests and measurements of milled surfaces.
而对后期的PIV流动显形实验结果进行分析时，又进一步验证了理论推导以及实验测量所得结论的正确性。
The results in the next experiment investigation of PIV verify the conclusions of theory deducing and the experiment measurement exactly.
进一步，通过对激光光束测量和高斯曲线拟合，验证了所提出方法的有效性。
Further, through the measurement of He-Ne laser beam and Gaussian fitting, the mentioned method is validated.
目的验证重建心阻抗图测量左室射血分数（LEF）的可靠性。
Objective To Validte the Yeliabil of left ventricle ejection fraction(LEF) measured by reconstructed impedance cardiography(RICG).
有限元计算和试验测量结果验证了这一模型对压电振子频率计算的准确性。
The FEM and measured results validated the accuracy of this model in frequency calculation of piezoceramic elements.
龙王江锑金矿带的化探异常及分散流测量，在验证矿床的矿化类型、含矿性以及发现矿床方面都起了重要作用。
The geochemical anomalies and the dispersion trains survey have played a very important role in the verification of mineralized type, evaluation of mineralized potential and discovery of ore deposits.
通过对双通道采集输入信号的相关性测量，验证了采集的同步性。
By measuring the correlation of two-channel input signals, the synchronism of acquisition signals is verified.
最后，对某超宽带正交解调接收机的实际测量结果的数字校正，验证了这种方法的有效性。
Finally, the validity of digital correction is verified by simulation and practical measurement of a UWB quadrature demodulation receiver.
通过对淬火试件进行金相组织分析和残余应力测量，验证了数值模拟的可行性。
Through the microstructure analysis and residual stress measurement on a quenching test-piece, the feasibility of the numerical simulation is proved.
此次试验再次验证了带电测量的可行性与可靠性。
This test further verifies the feasibility and reliability of live line measurement.
通过误差测量与补偿试验，验证了该方法应用于数控机床误差补偿的可行性。
Through an experiment to measure and compensate the spatial position errors, the feasibility of applying this compensation method to NC machine tools is validated.
针对激光测距机瞄准轴与接收轴一致性的测量，提出了一种新的方法——矩形点阵法，并通过大量的实验验证了此方法的可行性。
To measure the parallelism between the sighting axis and the receiving axis of the laser range finder, the matrix method is presented in the paper.
为了验证噪声检测系统的精度和可靠性，在半消声室和普通房间内，分别对标准声功率源和小型电机作声功率对比测量试验。
To verify the accuracy and reliability of the system, contrast tests on reference sound power source and small motor are performed respectively in a semianechoic chamber and a common room.
导出了频谱仪测量低信噪比时的误差修正公式，并用实验结果验证了理论计算的正确性。
Error correct formulae of low signal to noise ratios measurement are derived on a spectrum analyzer, the experiment results are reported to verify the correctness of theory calculation.
根据此矩阵得出了红外光谱测量中正交双偏振法，并通过实验验证了其有效性。
Based on the matrix, we get the orthogonal polarizing method in the Near-infrared spectral monitoring and verify it in experiment.
最后给出了实际的测量数据，验证了振动补偿的有效性和系统的可靠性。
Practice had proved the effectiveness of vibration compensation and the reliability of the system.
通过对二次群光接收机噪声性能的测量，比较了各种设计方案，验证了理论分析的正确性。
By measuring the receiver's noise performance of second order multiplex, various design schemes are compared and the correctness of the theoretical analysis is verified.
用DD 8000多道分析器和3路计数器的测量验证了它的可靠性。
The experiment reliability is verified by the measurement of DD8000 type multichannel analyser and 3-routes counter.
在实际测量中验证了该模型计算的有效性。
The validity of the mathematical model has been verified by the actually measured results.
试验结果验证了采用非接触式光电检测技术测量中应变率材料力学性能的可行性。
The feasibility of measuring the mechanical property of material in the mid strain rate condition with the non contact photoelectric detecting technology is verified by experimental results.
计算机模拟实验和对瓷砖破裂过程的实际测量验证了此种方法的正确性。
Computer simulation experiment and glazed tile rupture experiment proves the feasibility of this method.
并通过对圆柱螺旋弹簧的精确测量，验证了圆柱螺旋弹簧非线性理论的正确性。
The nonlinear theory of cylindrical helical spring is verified by the accurate measurement of one.
最后分析了当测量变量有多组测量时对系统参数可估计性的影响，通过线性与非线性实例验证了分析结果的有效性。
The relationship between parameter estimability and the number of data sets is discussed. The effectiveness of the proposed analysis can be demonstrated by the results of linear and nonlinear systems.
最后分析了当测量变量有多组测量时对系统参数可估计性的影响，通过线性与非线性实例验证了分析结果的有效性。
The relationship between parameter estimability and the number of data sets is discussed. The effectiveness of the proposed analysis can be demonstrated by the results of linear and nonlinear systems.
应用推荐