二是运动控制卡的驱动程序设计。
The second is the driver design for the motion control card.
互联网关的BSP和驱动程序设计是本论文的重点。
BSP and driver design of the interconnecting gateway are the emphases of the dissertation.
基于ADSP- 21160的数据采集卡驱动程序设计。
Design the driver program of data acquisition card based on ADSP-21160.
同时本文给出了嵌入式设备驱动程序设计的基本模型及其简单实现。
This paper provides a basic model of embedded device driver and a way to implement it.
并给出系统软件的设计方法，包括设备驱动程序设计和应用程序设计。
The method of the system software design is given, including the device diver design and application program design.
在采集卡软件设计中，重点对固件程序设计及驱动程序设计进行论述。
While designing the software, we take a great time in designing the firmware and driver.
控制系统的软件设计包括底层驱动程序设计和上层应用程序设计两方面。
The software design of control system includes the driver program design and application program design.
本文的主要工作是智能化PCI接口卡的设计，包括硬件设计和驱动程序设计。
The main work of this thesis is to design an intelligent PCI interface card including hardware and driver design.
软件编程方面，主要是各芯片的驱动程序设计，以及CAN总线协议和网络协议的实现。
Software design mainly includes the driver program design for the chips and CAN-BUS protocol and network protocol.
第一个专题是网卡驱动，主要讲述NE2000网卡的硬件特性与具体的软件驱动程序设计。
The first subject is network card driver, which gives an introduction the structure and function of NE2000 network card and discusses design of netcards'driver.
实验证明，所论述的基于ARMCAN的驱动程序设计和报文收发过滤技术具有普遍意义。
Experimental results show that the technology in this paper, based on ARM CAN driver design and message transceiving and filtering is universal.
本文主要研究了基于S3C 2410 (ARM9处理器)的USB总线接口的驱动程序设计。
The paper mainly completed the design of USB driver based on S3C2410 (ARM9 processor).
论文最后总结了显示驱动程序设计过程中所做的工作，并展望了显示驱动程序今后需要改进的地方。
In the end, we summarize the design work of display driver in this paper, and describe the prospect to improve the display driver in the future.
驱动程序是硬件和客户应用程序间通信的桥梁，文中介绍了USB的WDM功能驱动程序设计过程；
Function driver is the bridge between hardware and host software, and the design process of the WDM (Windows Driver Mode) driver for the USB was introduced here;
Linu x源代码是学习有关大多数设备类型的设备驱动程序设计最佳方法，包括网络设备驱动程序。
The Linux source code is a great way to learn about the design of device drivers for a multitude of device types, including network device drivers.
通过分析具体pci设备，给出了PCI设备驱动程序设计的通用方法以及驱动程序实现的关键代码。
Through analyzing the PCI device, the common method to develop the PCI device driver is introduced and the key code is given.
在书中涉及的高级主题是内存测试与验证、设备驱动程序设计与实现、实时操作系统内核、以及代码优化技术。
Among the advanced topics covered in the book are memory testing and verification, device driver design and implementation, real-time operating system internals, and code optimization techniques.
接着详细介绍了系统的软件设计，包括前端播控软件、接收模块的软件设计、USB驱动程序设计、文件接收机制等。
Then the software design is explained, including head-end system software, DVB module software, USB driver program and file receive mechanism.
最后，在软件设计部分探讨了启动代码编写、操作系统的选择和移植、任务规划和设计、驱动程序设计以及中断服务程序设计。
At last, in the section of software design, startup code programming, operating system choosing and transplanting, task design, drivers design and interrupt service routine design had been discussed.
给出DMA工作方式下数据传输的设计方法，可编程逻辑器件的控制逻辑和驱动程序设计，解决了数据传输连续性的关键问题。
The way of data transfer in DMA mode, control method of logical programmable device and design of driver program are discussed to solve the key point of sequential transmission.
在驱动程序设计部分，首先引入EZ - USB通用设备驱动程序开发模型，然后具体介绍了本系统中驱动程序的设计过程。
Driver in the design, First introduced EZ-USB GDP development model, and then presents the driver of the system design process.
本文实现了基于PCI总线接口的图像采集卡的整体设计，详细地论述了该系统的硬件设计、驱动程序设计和PCB版图设计。
This paper implements the whole design of image grab card based on PCI bus, and discusses the hardware design, driver design and PCB circuit design of this system in detail.
接着主要讨论了USB系统的特点及事务处理格式、实现构架驱动程序设计并且成功加载到系统，达到了MIS对USB接口使用的要求。
The feature of USB system, transaction processing format and the driver program successfully installed in system is discussed in the paper after that, USB interface can be used in MIS.
系统设计包括硬件设计、单片机固件设计以及设备驱动程序和用户应用程序设计。
The system is composed of hardware design of chip microprocessor, firmware design of chip microprocessor, device driver and application software design.
系统部分驱动程序的设计，包括DSP对FLASH烧写和擦除的软件实现、程序的自举加载、DSP与RTL 8019as接口通信程序设计。
Design of the system driver, including the software of FLASH's erase and programming by DSP, BootLoader and the interface communicator between the DSP and the RTL8019AS.
然后详细描述了USB驱动程序和固件程序设计。
本论文中详细介绍了驱动程序的开发工具和usb总线的软件模型，以及驱动程序、应用程序设计的过程。
In the essay it also introduces the development tools and USB's soft model in details, and presents the process of driver programming and application programming.
本文也对驱动程序的这类特殊的程序设计做了简要介绍，包括开发和调试工具的使用等。
This thesis also describes common knowledge about kernel-mode drivers, especially about development and debugging tools used in driver development.
着重论述了通用串行总线(usb)的特点，以及USB设备的固件程序设计、驱动程序开发和上层应用程序的开发。
The feature of USB, firmware design of USB device, driver design and application design are emphatically described.
着重论述了通用串行总线(usb)的特点，以及USB设备的固件程序设计、驱动程序开发和上层应用程序的开发。
The feature of USB, firmware design of USB device, driver design and application design are emphatically described.
应用推荐