电机智能驱动控制系统及智能充电控制系统。
Intelligent drive motor control system and intelligent charging control system.
LINK是一个分布式的超高速驱动控制系统。
LINK is an ultra high speed distributed drive control system.
智能驱动控制系统。
设计了一套行波型超声波电机驱动控制系统电路。
本文的主体是双边直线电磁抽油机的驱动控制系统。
该文对电动车驱动用电机驱动控制系统进行了研究。
The control system using in the electric vehicle was researched in this paper.
本文介绍了新开发成功的客车电动外摆门驱动控制系统。
The paper presents a driving and controlling system of the electric door swung outside for bus.
设计了基于超声波电机的二自由度机械臂的驱动控制系统电路。
Drive and control system for two-degree of freedom based on the ring-type travelling-wave ultrasonic motors is designed.
驱动控制系统是微流体数字化技术各项应用中的重要设备系统。
The driving control system is the important equipment system in the applications of Digitalization of Microfluidic technology.
介绍了医用超声内窥镜成像系统的工作原理，构建了驱动控制系统。
The working principle of ultrasonic endoscope and the construction of the driving control system were introduced.
在此基础上，提出了微流体数字化技术用压电驱动控制系统的特殊设计要求。
And it proposed the special design requirements of piezoelectric driving control system, which were applied for Digitalization of Microfluidic technology by above conclusions.
设计了基于可编程控制器PLC的程序控制系统、直流电动机的驱动控制系统和数字显示系统。
The program controlling system based on PLC , the drive system for controlling DC motor and the digital showing system has been developed in present work.
在FPGA的可编程控制功能的实现中，完成了基关节单元电机驱动控制系统SOPC模块化设计。
To realize the programmable function of the FPGA, a SOPC module system of the base joint cell has been designed.
文摘：讨论了电动汽车驱动控制系统的特殊性，研究了电动汽车驱动控制新技术，并介绍了有关的控制器件。
Abstract: Discusses particularities of drive systems for EV studies new technology on the control of drive for EV, and introduces some control elements.
为了实现转镜的高转速、连续可调以及高度稳定性，对转镜Q开关的高速电机及其驱动控制系统进行了设计。
In order to obtain a kind of spinning prism with high spinning speed, continuous adjustability and robust stability, the driving system of a high-speed motor for spinning prism Q-switch was designed.
设计了基于数字信号处理器的超声电机驱动控制系统，以数字波合成器作为超声信号发生器，以全桥逆变器为功放。
The USM driving control system based on digital signal processor was designed. The digital wave synthesizer was used as the signal generator, and the full-bridge inverter was used in power amplifier.
论文在课题组已设计的电动汽车感应电机驱动控制系统的基础上，设计了一套新的电动汽车感应电机驱动控制系统。
On the base of the induction motor drive system for electric vehicles designed by project team, the dissertation designs a new induction motor drive system for electric vehicles.
研究微米级磁致伸缩微位移机构的控制技术，设计并实现了一个二维平面行走伸缩机构的PWM脉冲驱动控制系统。
The control mechanism of magnetostrictive microdisplacement actuator is investigated. A PWMbased system to control a microdisplacement actuator of two dimensions is designed and implemented.
最后对本课题研制的电机本体及其驱动控制系统，进行了电机旋转总调试，实验取得了比较理想的参数波形和调速曲线。
Finally, the ideal waveform and speed curve was achieved after the motor speed experiments with developed ontology and drive control systems.
本文针对“十五”航空基金项目—新型航空用直线直流电动机驱动控制系统，研究了飞机应急放油阀用航空直线步进电动机的驱动控制技术。
The thesis studies mainly the drive and control technique of aeronautic linear DC step motor(LDCSM) used in emergency discharging oil valve on airplane.
图3所示的系统是一个封闭循环，传感器负责为控制系统提供数据，而控制系统则驱动着环境中因素的变化。
The system shown in Figure 3 is that of a closed loop, with sensors feeding the control system that drive changes in the environment.
概述了控制系统的电源电路、驱动电路、显示电路与软件设计及信号采集的方法。
The power supply circuit, driving circuit, display circuit, software design and signal collection of the control system are outlined.
Skylifter计划使用若干这种驱动器来控制飞船的水平运动，同时也辅助安装在气球内部的浮力控制系统操纵飞艇的升降。
Skylifter plans to use several such drives to control the craft’s horizontal motion, and also to aid a buoyancy-control system within the envelope in moving the vehicle up and down.
该装置由驱动机构、固体中子吸收体、控制系统组成。
The device consists of drive machine, neutron absorber and control system.
根据这些个信息，控制系统可以向盘片驱动系统发送提速或降速的指令。
With this information, control can send speed up or slow down commands to the disc drive motor.
本文应用单片机、步进电机驱动芯片、字符型LCD和键盘阵列，构建了集步进电机控制器和驱动器为一体的步进电机控制系统。
In this paper, microcontroller, stepper motor driver chips, character LCD and keypad array, build a set of stepper motor controller and driver as one of the stepping motor control system.
本课题以混合驱动调速控制系统硬件开发为基础，旨在通过各种实验数据比较分析，验证该方案的可行性。
This research bases on the hardware development of hybrid drive and speed regulation system, and analyzes the experimental data, and verifies the feasibility of the system.
本课题以混合驱动调速控制系统硬件开发为基础，旨在通过各种实验数据比较分析，验证该方案的可行性。
This research bases on the hardware development of hybrid drive and speed regulation system, and analyzes the experimental data, and verifies the feasibility of the system.
应用推荐