本文介绍三相混合式步进电动机的驱动控制电路。
This paper introduces the controlling and drive circuits of three phase hybrid stepping motor.
第六章着重对IGBT的驱动控制电路进行了说明。
Chapter Six makes out the drive and control circuit of IGBT.
试验表明该驱动控制电路具有性能稳定、驱动能力大、抗干扰能力强等特点。
Experiments showed that the drive circuit had characteristics of reliable performance, powerful drive energy, strong anti-interference ability.
超声波电机是一种典型的机电一体化电机，其驱动控制电路的好坏直接影响着电机的性能。
The ultrasonic motor is a typical mechanical and electrical composite, so its performance is affected directly by the quality of its driving circuit.
一种碎纸机的倍力驱动控制电路装置，其特征在于，该装置包含有：一与该碎纸机的马达起动电路并联的倍力电容；
The utility model comprises a force-doubling capacitor which is connected with the motor starting circuit of a paper breaker in parallel.
根据有机发光二极管(OLED)的特性，利用解码模块和FPGA控制模块，设计oled视频动态图像驱动控制电路。
Based on the characters of organic light emitting display (OLED), an OLED controlled display circuit is designed utilizing decode module and controlling circuit by FPGA.
LED照明的应用离不开它所需要的驱动控制电路，通过驱动电路来获得良好而平稳的电流，使LED照明更加稳定，满足各种场合的应用要求，同时可以延长LED的使用寿命。
LED drivers are necessary in the application of LED lighting. They can supply constant output current and make the LED light even, and also can make the LED's life longer.
负责散热控制、电源和驱动的灯管控制电路会变得更为复杂。
Heat management, power supply, and drivers-the bulbs' controlling circuit boards-get more complex.
机械控制电路实现水位检测、电机驱动、进水、排水等功能，主要由水位检测器、电动机、传动系统部件、进水排水电磁阀组成。
Machine control circuit realizes the functions of water level detect, motor driven, water import and export, it consists of water level detector, motor, transmission system components and penstocks.
其中驻波超声波电机具有驱动和控制电路简单，转速平稳，波动较小等突出优点。
Standing wave ultrasonic motors have many outstanding features for simple drive and control circuit, stationary speed of rotation, smaller undulation, etc.
介绍变频器驱动一用一备负载的自动定时轮换控制电路及组合开关联接。
This paper introduces the automatic control circuit time in turn driven by inverter with the using and the reserved load and combined switch connection.
文中对所研制的焊接磁搅拌装置的主电路、控制电路、驱动电路进行了研究和设计。
The main circuit, control circuit and driving circuit of the developed device was studied and designed in the paper.
第三章详细介绍了软起动控制器的硬件设计，包括主电路、控制电路、驱动保护回路和辅助开关电源电路的分析和设计。
The third chapter mainly introduces the hardware design of soft starter, including the main circuit, control circuit, drive circuit, and protect circuit and auxiliary switched power design.
主要介绍以可编程门阵列器件构成恒流源核心控制电路的设计思路，通过机电自控装置驱动可调变压器实现新的稳流方法，实验证明这一方法是可行的。
A design method of using GAL to make a constant current source is introduced, proving a new method of current stabilization by means of driving regulated transformer by a controlling device.
电源模块为系统控制电路、变频驱动电路、变送电路、DSP芯片提供不同要求的电源。
The power supply module provides the control circuit, the drive of frequency conversion circuit, transaction circuit and DSP with different power supply.
为防止功率管开关过程中对控制电路造成干扰，采用光电隔离的方法实现驱动电路和控制电路的隔离。
To prevent the control disturbance in the process of MOSFETs on-offs, Optoisolator circuit has been used to realize the isolation of the driving circuit and the control circuit.
其主电路采用了独立式RC脉冲放电回路，控制电路则通过8051单片机和TC4427高速MOSFET驱动器完成对主电路的控制。
Main circuit uses independent RC pulse generator and control circuit can control the main circuit based on 8051 single chip microcomputer and TC4427 high-speed power MOSFET driver.
每个器件都有一个八位CMOS移位寄存器和CMOS控制电路，八个CMOS数据锁存，八个双极电流吸收达林顿输出驱动器。
Each device has an eight-bit CMOS shift register and CMOS control circuitry, eight CMOS data latches, and eight bipolar current-sinking Darlington output drivers.
双回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。
To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.
主要介绍一种大功率超声波逆变电源装置的主电路、控制电路、驱动与保护电路的设计，并给出实验结果。
This paper introduces the design of high power supersonic inverting power supply, including main circuit, controlling circuit, driving and protecting circuits, and gives experimental results.
系统包括CCD驱动脉冲产生电路、低噪声测量放大电路、自适应比较电路、单片机控制电路以及上位机处理程序。
The system consists of driving pulse generating circuit for CCD, instrumental amplifier with low noise, MCU controlling circuit and PC program for dealing with the data conveyed by MCU.
由程序综合的控制电路以PW M控制和ZVS控制为目标，并由时钟同步，实现了对驱动波形的控制。
The latter takes PWM (Pulse-Width Modulation) control and ZVS control as its target, synchronizes with clock to realized its driven waveform. In addition, adaptive dead-time control is analyzed.
该模块由高速前放电路，数字逻辑电路，强度调制器驱动电路，自动增益控制电路，以及强度调制器组成。
The module is made of high speed amplifier, AGC circuit, digital logical circuit, intensity modulator drive circuit, and intensity modulator.
文中对激光供电方案中所需的关键器件激光器（LD）、光电转换的工作特性做了详细的描述，对激光器的驱动电路、保护电路和温度控制电路做了深入的研究。
This paper describes the working characteristics of the key apparatus LD and optoelectric conversion, and deeply researches the drive circuit, protection circuit and temperature controlled circuit.
设计出控制电路及驱动电路，阐述了自动扫描提供触发电压技术的实现方法；
The control and drive circuits have been implemented, and the realization of auto-tracking to offer igniting voltage is explained in detail.
就其电源的主体结构，全桥主电路、控制电路、驱动电路以及保护电路的工作原理作了简要的论述。
The composition of the inverter, the working principle of full-bridge main circuit, controlling circuit, drive circuit and protect circuit are described.
电磁感应加热电路设计包括功率电路、控制电路、振荡和驱动电路等单元，阐述系统的电路设计。
Electromagnetic induction heating circuit design includes power circuit, control circuit, oscillations and driving circuit modules expounded on the circuit design.
并详细介绍了功率驱动电路及逻辑控制电路。
Then discuss the power drive circuit and the logic control circuit in detail.
硬件部分包括单片机控制电路、红外探头电路、驱动执行报警电路、LED控制电路等部分组成。
The hardware part includes the control circuit of SCM, and the infrared probe circuit, and the alarm circuit, and LED control circuit.
硬件部分包括单片机控制电路、红外探头电路、驱动执行报警电路、LED控制电路等部分组成。
The hardware part includes the control circuit of SCM, and the infrared probe circuit, and the alarm circuit, and LED control circuit.
应用推荐