近壁面采用壁面函数法来处理。
近壁区处理分别采用两层和三层壁面函数。
The three-layer and two-layer wall function were applied to prediction of flow in the near wall region.
为有效减少计算工作量，近固壁区采用了壁面函数方法。
The computational effort due to dense grid needed near the solid boundaries is reduced using a wall function method.
针对这一问题，修正了亚格子雷诺应力模型的壁面函数，得到了较好的计算结果。
To this end, the wall function of the sub-grid Reynolds stress model was modified to obtain a better result.
网格的划分采用非结构性网格，湍流模型为SA湍流模型，在近壁处采用壁面函数进行修正。
A finite volume method with unstructured meshes and s a turbulence model were employed in the calculation.
研究了考虑结构性丧失和硬化的结构土屈服面函数、流动法则、硬化规律和弹性规律等，构建了一个结构土的弹塑性本构模型。
After researching of the yielding function, suitable flow rule and harden law and elastic law of structured soil, a structured soil constituted model has been proposed.
利用GPS水准对模拟大地水准面进行约束，采用“移去——恢复”技术和多面函数法进行拟合内插，得到转换后的大地水准面。
The GPS-levelling is used to add constraints on the simulated geoid, and the "remove-restore" method and the multi-quadric function method are used to interpolation, so as to obtain the refined geoid.
基于RNG紊流模型，采用VOF法、空度法和璧面函数法分别处理自由面、不规则边界和壁边界，对丁坝附近的水流进行了模拟和研究。
RNG turbulent model combining with VOF method, porosity method and wall function was used to simulate and research the flow around a spur-dike.
相反，两者之间的，波函数会相互抵消，所以我们在中间会得到一个节面。
So instead, these would be canceling out wave functions between the two, so we would end up with a nodal plane down the center.
该函数将查看手中的牌并返回手上的牌面总值。
This function will look at the CARDS in the hand and return the total value of the hand.
尽管numeric的涵盖面当然与可以利用Pyrex 的函数不同，但是肯定会有一些重叠。
The coverage of numeric is certainly not identical to those functions that can benefit from Pyrex, but there is certainly some overlap.
另一方面，一个更灵活的算法可能对某些类型的函数不会做出有类似倾向性的概括。
On the other hand, a more flexible algorithm might not have made that same generalization with the bias toward a certain type of functions.
而另一方面，数据库开发人员则可以把精力集中于存储过程与函数的开发。
The database developers, on the other hand, can concentrate on developing stored procedures and functions.
另一方面，也有许多编程语言是声明性样式，包括函数语言和逻辑语言，还包括通用语言和专用语言。
On the other hand, there are also many programming languages that are declarative in style, including both functional and logic languages, and also including both general purpose and specialized ones.
一方面，这个附加函数将产生一些流量。
On one hand, this additional function can cause a lot of traffic.
其中一方面是，您不能事先预计某个函数在调用时的确切地址！
One is that you can't predict in advance at which address a function will really be when it's called!
另一方面，函数应该在对选定元素不感兴趣时使用，因为您已经知道要执行操作的页面元素。
On the other hand, a function should be used when you aren't interested in selected elements because you already know the elements on the page on which you will take action.
不利的一面是，利用这个函数有点不够简练，且相当不灵活。
On the down side, utilizing this function is somewhat less concise, and considerably less elegant.
另一方面，复杂算法产生Box，因为这是使用构造函数参数可以推断的最具体类型。
On the other hand, the complex algorithm yields Box, because that is the most specific type it can infer using the constructor arguments.
另一方面PrivateAccess函数使用断言是因为只有很有限的几种方式调用该函数。
On the other hand, the PrivateAccess function calls assert because there is a very limited number of ways the function can be accessed.
当在大型应用程序中使用回调函数，就会导致编写出很难阅读的意大利面式代码。
which, when used on a larger scale, can lead to hard to read spaghetti code.
为了令你们习惯于这个想法，我画一个三变量函数的等值面,这是一个平面,由函数w=c给出的。
So, just to get you used to this idea, I'm going to draw a level surface of a function of three variables OK, so it's a surface given by the equation w of x, y, z equals some constant c.
在设计控制系统时，滑模控制滑模面通过最小化最优价值函数得到，控制器采用饱和控制器。
In the process of control design, the sliding surface of sliding mode control is determined by minimizing the optimal cost function, and the controller is the saturation controller.
采用三角矢量面元(rwg)基函数，模拟电流分布。
The triangle vector basis function (RWG) is employed to simulate the current distribution.
从而获得了滑移面几何控制参数与内部稳定性安全系数之间的函数关系。
Then the function relations among the geometrical controlling parameters of sliding surface and the internal stability safety factor are deduced.
本文提出了以功率消耗为目标函数、犁面几何参数的可行范围为约束条件的犁面优化设计方法。
This paper proposes an optimal method for plow bottom moldboard design by taking the power consumption of the objective and the feasible region of the geometric parameters for boundary constraints.
本文试图借助复变函数方法求解在面斜对称载荷下无限各向异性弹性介质的周期裂纹问题。
This paper attempts to solve the periodic crack problems of infinitive anisotropic media for plane skew-symmetric loadings by means of the method of complex function.
在无需知道参考物面尺寸的情况下，提出判定函数，调节光轴与载物台垂直。
Criterion function is designed to determine the verticality grade between the optical axis and the reference surface without the knowledge of the reference's dimension.
在无需知道参考物面尺寸的情况下，提出判定函数，调节光轴与载物台垂直。
Criterion function is designed to determine the verticality grade between the optical axis and the reference surface without the knowledge of the reference's dimension.
应用推荐