工程师们正在研发更多高效的方法，批量生产非均匀性多孔材料和固体泡沫，以适应具体的结构应用。
Engineers are developing more efficient methods to mass produce non-uniform porous materials and solid foams that can be tailored to specific structural applications.
材料结构和性能符合非承力部位骨组织工程支架材料的要求。
These demonstrate that the composites obtained in this work can meet the requirements of bone tissue engineering scaffolds.
半固态金属成形技术的关键是制备非枝晶结构的半固态金属材料。
For semi solid metal forming, it is crucial to produce semi solid metal materials that have non dendritic structure.
将这种方法应用到具体的非晶相绝缘体中，以材料的实际结构来构造双势垒模型，得到的结果与实验相吻合。
When it is applied to amorphous insulating materials with double well potential model being constructed based on real structure, simulation results are in accord with experiments.
由于活塞结构和材料的特殊性，对于它的检测只能采用非接触测量的方法，而目前尚没有成熟的技术。
Because of particularity of structure and material, the piston must be measured by the non - contact method. but, at present there isn ' t mature technique.
数值结果给出了该类非均匀材料有效反平面剪切模量随微结构参数变化的规律。
Numerical results demonstrate the variations of the effective antiplane shear modulus of such heterogeneous materials with microstructure parameters.
本文针对连接结构中含圆孔的复合材料板，根据非均质各向异性弹性理论建立计算模型。
According to the nonhomogeneous anisotropic elastic theory, a calculation model of the composite material plate with the circular hole in joint structures is set up.
混凝土是多相、非均匀性质的多孔材料，因此，其细观结构与强度的关系表现出极其复杂的非线性关系。
Concrete is a kind of porous material with heterogeneous and nonuniform nature, therefore, it expresses quite complicated nonlinear relationship between the mesoscopic structure and the strength.
本文从非晶态物理的角度，综述了非晶态软磁材料的结构与磁性能的物理基础。
This paper overviews the physical base of the structure and properties of amorphous soft magnetic materials based on amorphous state physics.
提出了一种采用方波热脉冲测量低温下固体结构材料的比热和热导率的非稳态方法。
A transient method with rectangular pulse heating has been developed to measure the specific heat and thermal conductivity of solid structural materials at low temperatures.
在块体研究中，人们已经制成了很多具有非基态结构的块体材料，这些材料往往具有较传统材料更为优异的性能。
In the research of the bulk, people have made out a lot of of bulk materials with non-ground state structure. These materials are often more excellent than the traditional materials.
本文对非均质耐热梯度功能材料(FGM)层间的结构与性能进行了研究。
The study on the structure and property of inter laminated of uneven hot resistant functionally gradient materials (FGM) is introduced in the paper.
高温抗渗碳红外釉料是一种非晶态结构的高温、抗渗碳、耐腐蚀的新型红外辐射材料。
The high temperature anti-cementite infrared glaze is a new type of high temperature anti-cementite and corrosion resistant infrared radiative material with non-crystal structure.
研究结果显示了纳米金属磁性多层膜材料的微结构空间位置相关性和电磁输运过程奇异的非定域特性。
The microstructure space dependence and non-localization electromagnetic transmission were found, which demonstrated the mesoscopic characteristic of the nanometer magnetic multilayers materials.
本文对非均质耐热梯度功能材料层间的结构与性能进行了研究。
The study on the structure and property of inter laminated of uneven hot resistant functionally gradient materials is introduced in the paper.
由于喷涂线呈非直线分布，喷涂材料热胀冷缩产生的应力不会导致填充结构变形。
As the spray coating line is in the non-linear distribution, the stress of a spray coating material due to thermal expansion and contraction can not deform the filling structure.
这类材料的分子量较大，并具有非平板型空间结构。
The material has quite high molecular weight and is in a non-flat type spatial structure.
微细切削技术是面向金属与合金等非硅材料微小型结构件精密加工需求的关键技术。
Micro-cutting technology is the key technology for the precision machining of microstructure which is usually made of non-silicon materials such as metal and alloy.
非晶态镀层具有特殊的微观结构，是很好的耐蚀性材料。
Amorphous coatings have excellent corrosion resistance for their particular microstructure.
非晶态材料微观结构及动力学性质的理论研究；
Theoretical study of local structure and dynamic properties of amorphous materials;
本实用新型结构简单，方便实用，可广泛应用在各种非导磁材料的壁面上。
The utility model has the advantages of simple structure, convenience and practicability, and can be widely applied in the wall surfaces of various non-magnetic conduction materials.
气凝胶是一种结构可控的新型轻质纳米多孔性非晶固态材料，具有许多特殊性质，因而蕴藏着广阔的应用前景。
Aerogels are low donsity nano-porous non-crystalline solids whose structures can be controlled through preparation. They have numerous applications because they have many special properties.
为产生中红外波段的超连续谱，须使用在该波段具有高透过率的非石英材料来拉制光纤或微结构光纤。
Non-silica glass materials are good candidates for fabricating microstructured fibers used for mid-IR supercontinuum generation because of their high transmittance in the region.
非晶合金在工程应用中，不可避免地会发生塑性变形，其产生的结构变化会对材料的各种性能将会产生影响。
The plastic deformation inevitably occurs when amorphous alloys are applied in engineering. Microstructure transformation of amorphous alloys will influence various properties greatly.
采用二维格构模型来模拟岩石类非均质材料的开裂过程。该方法能较好地反映材料微结构对开裂的影响。
A new method, lattice model, is presented to simulate the fracture of disordered brittle materials, such as rock, concrete.
因此，对于泡沫金属这种细观结构非均匀性比较严重的材料，仅仅使用初始密度尚不足以刻画其材料特征。
Therefore, for metal foam with highly complicated mesostructure heterogeneity, it is not enough to describe their material characteristics only using initial density.
为进行连续介质到非连续介质转化的数值模拟，实现结构破坏过程的仿真分析，将固定和旋转的弥散裂缝模型与变形体离散元方法结合应用于混凝土、岩石等准脆性材料的受拉开裂过程分析。
Fixed and rotating smeared-crack models based on a deformable distinct element method were developed to analyze the fracture of quasi-brittle materials such as concrete and rock under tension.
混凝土材料是复杂结构的非均质复合材料体系，通过局部的研究对整体的外推就难免出现谬误。
Because the concrete has the multiple structure and non-isotropic compound materials system, it will present the error through the partial research to the whole method.
该系列镁基块体非晶合金的优异性能使其在新型轻质结构材料等领域具有广阔的应用前景。
The serial Mg-based block amorphous alloy has wide application prospect in the fields of novel light structure materials, and the like by excellent performance.
该系列镁基块体非晶合金的优异性能使其在新型轻质结构材料等领域具有广阔的应用前景。
The serial Mg-based block amorphous alloy has wide application prospect in the fields of novel light structure materials, and the like by excellent performance.
应用推荐