经实验表明，其非线性误差降低很大。
The experimental results show that significant reduction of its non-linear error.
为保证测量精度，应对非线性误差进行校正。
To ensure accuracy, the nonlinear error should be calibrated.
研究表明，这些方法有较大的非线性误差和干扰误差。
The investigation indicates the lager nonlinear-error and the disturbing errors of these methods.
用这种方法可以求得最佳拟合直线方程和最小的非线性误差。
Using this method optimum imitative straight line equation and minimum non-linear error can be got.
建立了惯导系统(INS)初始对准的线性和非线性误差模型。
Linear and nonlinear error models for Inertial Navigation System (INS) initial alignment are established.
提出了一种用支持向量机校正传感器非线性误差的原理和方法。
Principle and method of correcting nonlinear error of sensors based on the support vector machine is given.
分析了一般电桥电路作为传感器其输出电压产生非线性误差的原因。
The reason of nonlinear error caused by output voltage in common electric bridge as the sensor is analyzed.
如何对传感器非线性误差进行修正是一个具有普遍意义的技术问题。
It is a universal technology stress how to correct the nonlinear error for a sensor.
但压电陶瓷的非线性误差与位移量小，一直影响其应用范围的扩大。
Due to the non linear error and micro-displacement, its application is limited.
它指出了减少非线性误差的方向，并为部分元件参数的设计提供了依据。
This paper points out the direction of reducing nonlinear error and offers the basis for design of partial components parameters.
从后处理的角度，分析了五轴数控加工的非线性误差，指出了其影响因素；
Based on viewpoint of post-processing, non-linear error of five-axis NC machining was analyzed and its influencing factors were presented.
然后运用反函数实现信号的线性提升，达到降低信号测量非线性误差的目的。
Then the application inverse function is realized promoting of signal linearity, and achieves the purpose that reduces the nonlinearity to measure the signal error.
针对传感器信号中存在的非线性误差，介绍了硬件补偿和软件补偿两种方法。
Hardware compensation and software compensation methods for nonlinearity in the sensor signal are introduced.
提出了一种在智能仪器中用补偿函数实现非线性误差修正和标度变换的方法。
A method to realize non linearity correction and scale transformation with compensation function used in intelligent instrument is presented.
为减少检测系统的测量误差，在自动检测系统中需要对非线性误差进行校正。
In order to reduce the measuring error of automatic detection systems, it is needed to adjust the nonlinear error for automatic detection systems.
利用集成运算放大器的特点，设计了输出电压无非线性误差的电桥电路传感器。
Using the characteristic of integrated operational amplifier, an electric bridge circuit sensor without nonlinear error in its output voltage is designed.
此芯片集成化程度较高，可以补偿硅压阻式压力传感器的温度误差和非线性误差。
It is mainly used to compensate temperature shift and non-linearity error of piezoresistive pressure sensor.
采用10毫居里放射源，线性可测范围达到180毫米，非线性误差，小于2%。
By using a 10 millicurie radiant source, the linear measurability may reach 180 millimeter with a non-linear error less than 2%.
在单体称量方面，本论文运用函数链神经网络方法建模学习以补偿桥路的非线性误差；
In the monomer weighing aspect, this paper using the function chain neural network method to model building and study , Compensation electric bridge misalignment error.
为了提高陀螺仪的测量精度，基于神经网络代数算法提出一种新的非线性误差补偿模型。
To improve measurement precision of gyroscope, a novel nonlinear error compensation model is proposed using an algebra algorithm of neural networks.
实验结果表明，逆模前馈补偿器有效地减小了系统的非线性误差，提高了执行器的控制精度。
The results of test show that this inverse model feed-forward compensator has effectively reduced the non-linear error of the system and has improved the control precision of GMA.
这些方法不能分析非整次谐波，不能区分一次谐波和偏心分量，并且含有较大的非线性误差。
These methods can't be used not only to analyze the non integral order harmonics, but to distinguish the eccentricity and the first harmonic, and contain the lager nonlinear error.
为了补偿激光外差干涉纳米测量中的非线性误差，提出了一种减小非线性误差的一次谐波方法。
To compensate of the nonlinearity error of heterodyne interferometers in nanometer measurement, a method for reducing the first harmonic nonlinearity is proposed.
系统采用了改进的相移算法，抑制了相移器误差以及探测器带来的非线性误差，提高了测量精度。
A modified phase shifting algorithm is used in our testing system to improve the measurement accuracy, which decreases the errors from phase shifter and detector's nonlinearity.
这种方法适用于各种类型的线性传感器，可以求出传感器的最小非线性误差及相应的最佳拟合直线。
This method is suitable for all kind of linear sensor and the least nonlinearity error can be obtanined by it.
仿真和实际加工验证了算法的有效性和实用性，证明算法具有轨迹过渡平稳、非线性误差小的特点。
This algorithm improves machining accuracy and lowers data storage. Finally, the effectiveness and practicality of this method were verified by simulation and actual machining.
对插值算法、神经网络算法进行了分析，并利用这两种方法对P SD的非线性误差进行了修正补偿。
The bilinear interpolation and neural network was analyzed, and the two means were used to modify the nonlinearity error of PSD and compensate it.
有些用于补偿检测系统非线性误差的数据，通常是借助外接仪器测量待检品标准量电压的方法来获取的。
Some compensation data for nonlinear error in metrical system is normally acquired from the measurement of tested the standard voltage by external equipments.
有些用于补偿检测系统非线性误差的数据，通常是借助外接仪器测量待检品标准量电压的方法来获取的。
Some compensation data for nonlinear error in metrical system is normally acquired from the measurement of tested the standard voltage by external equipments.
应用推荐