与其他版本控制系统相比，CVS最令人称道的地方就是其非锁定存储库，这使多个开发人员能够同时检出同一个文件。
Compared to other version control systems, CVS is most notable for its non-locking repository, which allows multiple developers to check out the same file at the same time.
根据定义，任何接受非本地控制系统的连接的QMgr都是不可信的，并且不可信系统应该受到更严格的限制。
Any QMgr that accepts connections from systems not under local control is by definition untrusted, and untrusted systems should be locked down tighter than most.
采用非相似余度设计思想，建立了无人机横侧向控制系统。
With the method of dissimilar redundant design, this paper put forwards a lateral direction control system of UAV.
能够直接输出非模糊值的简化模糊推论已被广泛应用于控制系统。
The simplified fuzzy reasoning model with the advantage that the model can output real number directly are frequently applied to the field of the control system.
系统突破传统的位置测量模式，成功的将图像处理技术引入到自动控制系统中来，实现了位置信号的非接触式测量。
The image processing technology is used in the automatic control system to realize the non-touching measurement of position signal instead of the traditional position measure methods.
第四章分析了非直井迹控制系统的特性。
Chapter Four analyzes the characteristics of optimal control system.
建立了非旋转管道环缝焊接自动控制系统，并介绍了其系统结构和工作原理。
The automatic control system of circular seam welding process for non - rotated pipeline was developed in the paper.
根据非回转体环向缠绕理论及叶片产品的具体要求，分析缠绕工艺，建立了张力控制系统的数学模型。
Next, according as no - gyrating round fiber winding theory and concrete request of vane, analyzing the winding technics, found the mathematics model of tension control system.
本文指出自校正控制中广泛采用的CARMA模型会导致控制系统对确定性扰动和非平稳随机扰动缺乏鲁棒性；
The CARMA model generally assumed in self-tuning control frequently leads to the controlled systems lacking robustness to deterministic and non-stationary stochastic disturbances.
为同时抑制时滞及非最小相位系统的超、负调和加快系统响应，本文提出一种基于模糊推理的智能内模控制系统。
Aiming to decrease overshoot, undershoot and settling time of non-minimum phase system with time delay, this paper proposes an intelligent IMC control system based on fuzzy inference.
利用模糊神经元非模型算法和NPID控制算法设计了油温控制系统和油压控制系统。
The fuzzy neuron non-model algorithm and the NPID control algorithm are adopted to design the control systems for oil temperature and pressure.
提出了零相位跟踪控制算法，使控制系统对给定非国特殊曲线具有很高的跟踪精度，从而保证了非圆轴类表面磨削加工精度。
An adaptive zero-phase tracking control algorithm is developed, and with which the servo system is able to track accurately a given non-circular high order special curves.
水轮机调速系统是典型的具有非最小相位、非线性、时变特性的复杂控制系统，难以建立精确的数学模型。
To the question of the hydraulic turbine regulating system, this paper discusses fuzzy neural network control (FNNC) based on the character of fuzzy logic and neural network theory.
介绍一种非ODS水剂清洗机的控制系统，该系统采用PLC和人机界面，适应了清洗工艺多样化的要求。
The control system for non-ODS aqueous cleaning is presented. Due to use PLC and man-machine interface in this system, applied to diversiform cleaning technology.
本文还分析了具有非匹配不确定性因素的模型参考变结构控制系统的稳定性问题。
The stability of model reference variable structure system with mismatched uncertainties is also analyzed.
介绍了非开挖钻杆管端加厚生产线自动控制系统的设计。
The design of non-dig drill pipe end-upsetting product line autocontrol system were introduced in this paper.
绿色社会经济控制系统，是相对于传统非可持续性经济控制系统而言的。
The green social economic control system is so termed against the traditional non-sustainable economic control system.
在导弹系统存在非匹配不确定性的情况下，提出了一种基于RBF神经网络和反演控制技术的神经网络自适应导弹控制系统的设计方法。
In this paper, a nonlinear adaptive control scheme for missile control system with mismatched uncertainties is proposed on the basis of RBF neural networks and inverse control technology.
应用非接触式的电磁作动器，采用模拟器件设计了一整套圆盘横向振动的主动控制系统，并对圆盘进行了振动主动控制实验。
Non contact electromagnetic actuator was used in the active control system of transverse vibration of circular disk composed of analog circuits.
探讨了关于非最小相位系统的参考模型自适应控制系统（MRACS）的一种设计方法。
This paper is concerned with a design of a model refenrence adaptive control system (MRACS)for a nonminimum phase system.
模糊逻辑是处理非精确输入与系统非线性的强有力处理方法，便于迅速开发鲁棒性控制系统。
Fuzzy Logic is a powerful processing methodology that easily accommodates imprecise input data and system nonlinearities for rapid development of robust control systems.
讨论二维脉冲时滞直接控制系统的振动性质，给出线性反馈控制下振动与非振动的实例。
The oscillation property of two dimension impulsive time-delay direct control systems is studied.
空分装置控制系统采用非iec标准的984梯形图编程，并且梯形图程序复杂，故障查找困难。
The control software adopts 984 Ladder Diagram. Its complicated logic is difficult to understand, and it doesn't accord with IEC programming language.
它除了保持WISARD的原有特点之外，在解决大维数或非确定性模式数据的识别问题以及控制系统成本方面有着明显的优势。
It has obvious advantages in large dimensional or non-deterministic pattern data recognition problems in addition to all merits of WISARD.
我们公司在线非接触式涂层重量测量系统和涂层重量自动控制系统领域是全球的领导者。
We are the world's market leader for online non-contact coating weight gauges and coating weight auto-control systems for continuous galvanizing lines.
讨论了张力控制系统的构成原理，设计了以可编程控制器控制的交流伺服系统，实现该设备的可控非回转体环向缠绕运动；
Next, discussing structuring truth of tension control system, designing that PLC control AC servo-system, achieve may control no- gyrating round fiber winding motion;
针对高速直线运动控制系统的位移测量需要，设计了一种基于磁阻原理的非接触式位移测量系统。
The existing friction models need to be improved for friction estimation in high speed linear motion system.
针对高速直线运动控制系统的位移测量需要，设计了一种基于磁阻原理的非接触式位移测量系统。
The existing friction models need to be improved for friction estimation in high speed linear motion system.
应用推荐