论述了非实际接触致损碰撞的法律规定，归纳出这种碰撞的主要类型，提出了分析这种碰撞案件几个关键问题。
In this paper, the legislation of damages caused by collision without direct impact are narrated, main types of such collisions are classified, and key notes of analyzing such cases are presented.
分析了非均匀接触下燕尾形榫头连接的应力状态，并借助于模拟试验，提出了非均匀接触导致疲劳破坏的基本痕迹特征。
The basic fatigue failure characteristics have been analyzed according to the stress analysis and simulation test under inhomogeneous swallowtail between compressor disk and blade.
分析了逆向工程中自由曲面的反求过程，对接触式和非接触式测量方法进行了比较。
The process of constructing free-form surfaces in Reverse Engineering and compares the untouched and touched measure methods was alysed in this paper.
理论分析及实验表明，采用CCD为光电转换元件的非接触测量厚度法是可行的。
Principle analysis and experiment result indicate that the non-contact thickness measurement method using CCD as photoelectric transformation element is feasible.
为此，本课题研究了一种在室内环境下通过非接触检测与追踪眼睛运动变化情况来分析抗眩晕药物药效的测量系统。
In this paper, we have developed a kind of tested system of analyzing the effective of anti-vertigo drug by no-contact measuring and tracing the change of eye-movement in room.
本文介绍非接触或单探头超声波物位检测仪的原理，分析影响检测仪正常使用的因素及其安装要求。
The paper introduces not touching single supersonic probe level measurement theory of operation, describes sort of factors that influences on measurement and install claim.
介绍了非接触磁电式转速传感器的基本原理、结构设计及磁路计算，给出了试验数据，并对测试结果进行了分析。
The basic principle, structure design and calculation of magnetic circuit for touchless magnetoelectric rotational velocity sensor are reported. The test data and testing result are also analyzed.
气体浓度光学分析方法具有测量范围宽、精度高、非接触在线测量等优点。
The optical analysis method of gas concentration has advantages of large measurement range, high precision, untouched on-line measurement and so on.
通过理论分析与实验验证提出一种全新的完全非接触料位测量方法。
A brand new entirely contactless way to measure the Material Level was brought forward.
本课题以南京某地铁线自动售票机开发项目为背景，对地铁自动售票机里的“非接触式筹码发售模块”进行了分析和研究。
This thesis comes from automatic ticket vending machine of Nanjing subway, analyses and studies the" Contactless Smart Token" of automatic ticket vending machine.
分析现有几种凸轮升程误差测量方法的优、缺点后，提出一种基于图像处理的凸轮升程误差的非接触式测量新方法。
After analysing the advantages and disadvantages of the measuring methods for the raising error of the CAM curves in existence, this article puts forward a new non-contact measuring method.
分析了LED芯片非接触检测系统噪声信号的功率谱，研究了噪声信号的抑制方法。
The noise power spectra of the non-contact detection system for LED chips and the noise suppression methods are discussed.
通过分析磁体与非磁性运动导体间的相互作用，发现了一种由非磁性运动导体驱动永磁体转动的非接触驱动方式。
The interaction between the permanent magnet and the moving conductor is analyzed in detail, and a novel noncontact driving mode is discovered.
运用图像分析和模式识别技术，实现非接触式的方坯自动定尺切割。
The technology of using image analysis and pattern recognition to implement the non-touching automatic billet cut-to-length is mainly introduced.
在离散元等三维非连续介质数值分析方法中，快速高效的接触检索算法是控制计算效率的关键性因素之一。
Fast and efficient contact detection algorithm is one of the most important key techniques to control computational efficiency in 3d discontinuous analysis such as the distinct element method.
分析了非接触式IC卡芯片耦台电源及读写距离的计算方法，并简要介绍了相关低压电路的设计技术。
Method of calculation for the non-contact IC card chip coupling power supply and the read and write distance were analyzed, and the relative low-voltage circuit designs were introduced.
目的分析准分子激光原位角膜磨削术(LASIK)后非接触式眼压(nct)的改变及其相关因素。
ObjectiveTo assess the changes and relative factors of noncontact tonometer (NCT) after laser in situ keratomileusis (LASIK).
对HV链铰链摆销接触点的运动进行了定量分析，并探讨了非就位啮合机理。
The motion of meshing point of swing pin of HV chain is analysed quantitatively, and the mechanism before taking its place is researched.
椭圆偏振测量是一种通过分析偏振光在待测薄膜样品表面反射前后的偏振态的改变来获得薄膜材料的光学常数和薄膜厚度的高精度、非接触测量方法。
Ellipsometry is an optical analytical technique used to determine the optical constants and the film thickness from measurements of the change in polarization state of reflecting light.
系统采用了射频识别技术和非接触式电流传感器技术，能够获取设备的标识和使用信息，提供给管理者进行分析和处理。
It implements a new type of equipment data acquisition system which is based on embedded system. The equipment data acquisition system includes RFID and untouched current sensor.
PIV技术是一种基于流场图像互相关分析的二维流场非接触式测试技术。
The particle image velocimetry (PIV) is an effective and non-intrusive technique to measure the planar distribution of velocity in the fluid based on the cross-correlation of flow images.
然后用SIMPACK软件及三维非赫兹滚动接触理论对其进行了动力学性能及接触力学性能的分析。
Subsequently use SIMPACK software package and CONTACT numerical procedure to analyse its dynamic performance and contact mechanical performance.
本文提供了一种非接触式六自由度运动测量与分析方法。
The paper presents a method for measuring and analyzing 6d motions of model with non contacted style.
介绍了系统的功能、硬件设计、软件设计和性能指标，重点分析了非接触式ic卡、证件号码光学字符识别(ocr)、票据打印及分时传送和纸币接收器等关键技术的实现。
The function, design, and performance index of the system are described, and the techniques of non-contact IC card, OCR of passport number, bill printing and cash acceptor are mainly discussed.
理论分析和实验结果初步表明了注入高次谐波电流非接触供电方法的可行性。
Finally, experiment results are given. The results show the feasibility of the harmonic injection method.
理论分析和实验结果初步表明了注入高次谐波电流非接触供电方法的可行性。
Finally, experiment results are given. The results show the feasibility of the harmonic injection method.
应用推荐