提出了通过传感器静态标定和坐标变换来减少安装误差影响的方法。
To reduce influence of mounting position error, sensor static calibration and coordinate transform are implemented.
详细介绍了电阻式应变测量系统的组成、系统静态标定的方法与步骤；
This paper described the consist of the resistance strain measure system and the approach of static calibration in detail.
本文给出该传感装置的静态标定和动态标定过程及其结果，并进行了分析。
The process and the outcome of static and dynamic calibration are given in this paper and it is shown that this device is well fit for measuring the pipeline pressure of visc…
首先，本文介绍了轨控发动机推力矢量测试原理，及静态标定装置设计方案的选择。
Firstly, measuring principle of the thrust measuring system is introduced, and how to select the design schemes of static calibration.
由于指端力传感器的结构特点，采用通常六维力静态标定方法较困难，且精度无法保证。
It is difficult to employ the accustomed calibration method for the characteristic of the fingertip force sensor, and the accustomed method is not able to assure the precision.
本文介绍了用阴影云纹法测量爆炸载荷下铝板变形的方法及结果，并进行了误差讨论和静态标定。
A shadow moire method and its results for measurement of distortion of aluminium plate at exploding charge is presented. Possible errors are also estimated.
最后，研究了传感器的静态标定原理，并对传感器进行了静态标定实验，得到了传感器的标定实验解耦矩阵。
Finally, principle of the sensor calibration is analyzed, and the sensor coupling matrix is calculated according to the data of the static calibration experiment.
介绍了传感器静态标定过程及步骤，并设计了一种基于51单片机的传感器参数自动标定及掉电记录保护装置。
Static sensor calibration process and procedure is introduced. A device for automatic sensor parameter calibration and power-fail protection based on 51 single chip computer was designed.
在线加速度传感器静动态标定方法的基础上，根据质量—转动惯量等效原理，提出多维角加速度传感器的静态标定方法。
According to equivalent principle of quality and moment of inertia, a method of static calibration for multi-dimensional angular accelerometer is proposed.
重点介绍了一种用于测量火箭发动机推力矢量的压电式测试系统，并设计了对测试系统进行静态标定和动态标定的装置。
A piezoelectricity measuring system used for measuring rocket thrust vector is introduced. A devices to static accomplish, calibration and dynamic calibration on the system is designed.
这一修正方法及修正公式可广泛应用于凡是用瞬态激励法(阶跃函数输入和斜坡函数输入)对压力传感器、力传感器以及其它各种传感器的动态和准静态标定中。
The correction methods and equations can be used for dynamic and quasi-static calibrations of pres - sure, force and other transducers in transient excited methods of step or ramp function inputs.
采用双晶片探头和电子天平对PZT微力传感器进行静态力标定，进而利用双晶片探头和电荷放大器对PZT微力传感器进行准静态标定，微小信号检测通过锁相放大器来实现。
PZT micro -force sensors were calibrated by bimorph and electronic balance in static state and by bimorph and charge amplifier in dynamic state, small signal was tested by amplifier.
进行了隧道电流传感器的静态、动态特性的检测试验，并对传感器静态特性进行了标定。
Testing experiments were carried out to observe the static, dynamic characteristics of the tunneling current sensor and the static characteristics is calibrated.
经静态及动态的标定和实际的切削试验证实，该测力台的主要性能指标符合CIRP的规定。
Static and dynamic calibrations and actual cutting tests have confirmed that the main performance figures of the dynamometer meet the specifications recommended by CIRP.
介绍了分流法湿度发生器、固定点（静态）湿度发生器的工作原理，标定方法及其应用。
This paper introduces two working principles of moisture generators, their methods of calibration and applications.
关于变轴数控机床精度研究，目前绝大多数工作集中在精度分析和静态运动学标定方面。
With regard to accuracy studies on the variable-axes numerical control machine tool, at present, the primary attempts have been focused on accuracy analysis and static kinematic calibration.
从挠性陀螺组合安装误差模型入手，推导出存在轴不对准角情况下的挠性陀螺组合静态误差标定模型，并给出静态误差标定的位置试验方案。
The installation error model of the gyroscope integrated is analyzed, and then error calibration model of flexible gyroscope integrated is deduced when malalignment Angle is considered.
提出的标定方案可以有效标定陀螺组合静态误差系数，从而减少陀螺漂移。
The scheme can calibrate static error coefficients of gyroscope integrated. Thus, the gyro drift is reduced.
提出的标定方案可以有效标定陀螺组合静态误差系数，从而减少陀螺漂移。
The scheme can calibrate static error coefficients of gyroscope integrated. Thus, the gyro drift is reduced.
应用推荐