静密封也采用金属斜面密封。
密封垫的种类有两种。静密封和动密封。
泵轴由动密封变成封闭式静密封，彻底避免了介质泄漏。
Shaft seals from moving into a closed static sealed and completely avoid the media leak.
高压超高压静密封技术是决定设备可靠性的关键性技术之一。
Technology of high pressure and super high-pressure static sealing is one of key technologies that determine reliability of equipments.
通过动、静密封的比较实验，研究了转速对密封能力的影响。
Through the comparative experiments between dynamical sealing and still sealing, to study the impact of rotate speed on the magnetic fluid seal.
具有极高的耐热、耐低温性、和较好的耐腐蚀性，适用于静密封。
It is fit for steady seal, with high heat resisting. Low temperature resisting and better corrosion resisting.
依据标准规范以及专业知识和专家经验建立了静密封设计专家系统。
Based on relevant standards and specifications, professional knowledge and experts' experiments about static sealing, the expert system for bolted flanged connection design is developed.
介绍了应用于液态金属钠介质回路阀门的静密封和动密封结构设计。
Introduces structure design of static sealing and dynamic sealing applied to loop valve with the medium of liquid sodium.
适用于液压缸活塞杆往复运动用密封装置，也可用于法兰端盖的静密封装置。
Apply to reciprocating motion of hydraulic cylinder piston rod sealed device can also be used to cover the static flange seal.
在试验研究中推导出静密封压差的计算公式，为密封间隙的结构设计提供了依据。
The equation of pressure difference for static seal is derived from tests, which provides bases for sealing design.
介绍了利用磁流体动力学、热力学理论，研究旋转轴磁流体静密封轴向承压能力的结果。
Using magnetic fluid dynamics and thermodynamics theory, a study on the results of axial bearing pressure ability of rotation axis magnetic fluid static seals was introduced.
分析了催化裂化装置静密封泄漏的主要介质、原因、途径，并提出了相应的预防和治理措施。
Major media, the cause and the approach of static seal leakage were analyzed in FCC plant. Corresponding preventive and treating measures were put forwards.
射流振荡气波制冷机的突出优点是无需输入外加能量并且没有转动部件，只需简单的静密封。
The prominent advantage of this facility is that it doesn't need extra energy supply and there is no moving part, just a simple static seal.
测试结果表明，该密封胶性能优良，成本低廉，可适用于不同温度条件下的管线阀门等静密封。
The testing result shows that sealing compound performance is good, costs are low, and is suitable for static seal of pipe line and valve under different temperature conditions.
概述：gsh型系列高压实验釜采用环形稀土永磁耦合驱动器，搅拌力矩大，具有静密封、无泄漏的特点。
Overview: the series high-voltage experimental kettle of the GSH type USES the drives of permanent magnetic coupling with the annular rare earth, with big mixing torque, static sealing and no leakage.
适应于弱酸、弱碱以及带有少量固体颗粒的介质，适用动、静密封，主要用于离心泵、柱塞泵、混合机、搅拌器及阀门。
Designed for weak acids and alkalis or media containing few grains of solid particles, both dynamic and static, mainly used for centrifugal pumps, plunger pumps, mixers and valves.
推导空气预热器漏风的一般性计算公式，分析影响漏风的因素，提出了采用双密封技术，新结构静密封，安装漏风自动控制系统等降低漏风的对策。
The general prediction of leakage rate is presented. Influencing factors are analyzed. Countermeasures such as double seals, new structure of static seal, automatic control system are introduced.
杂质泵用机械密封经过静试后，运转时高速旋转发生的离心力，会克制介质的泄露。
Impurity pump mechanical seal after static test, the operation of high-speed rotation of the centrifugal force generated will inhibit the leakage of media.
机械密封主要的是靠装在轴上的动环与固定在泵壳上的静环之间端面作相对运动而达到密封的目的。
The main mechanical seal is installed in the shaft on the dynamic in Central and fixed pump shell on the static ring for the relative motion between the end to achieve the objective of sealing.
提出了适用于淤煤转载机螺旋滚筒的静、动密封结合的密封设计方案。
With the methods dynamic and static seal combined, the design of the screw roller seal on the silt coal load machine was proposed.
机械密封安装调试好后，一般要进行静试，观察。
Good installation and commissioning of mechanical seals generally try to be quiet to observe the leakage.
打开包装后将颈圈静置10分钟让密封时产生的化学物质挥发散去。
Put it aside for 10 minutes after opening the package to dispel the chemical substances produced by sealing.
首先分析了在静、动密封装置中o形密封圈的密封机理。
Above all, it analyze the sealing mechanism of o sealing ring in static and dynamic devices.
磁流体密封技术具有无磨损、使用寿命长及适用于静动密封的特点，正被广泛应用于石油化工的泵、阀、釜及压缩机等领域。
Magnetic fluid seal is wildly used in pump, valve and kettle of the petroleum and chemical industry because of its low wear and long life.
机械密封主要的是靠装在轴上的动环与固定在泵壳上的静环之间端面作相对运动而达到密封的目的。
Mechanical seals are on the main shaft is installed in the dynamic ring in the pump shell and fixed up the static ring for relative movement between the face and achieve the purpose of sealing.
椎环、弹簧、弹簧座以及卡环，辅助密封圈有“O”形橡胶圈和PTFE楔形环，静环材料都为石墨(M106K)。
Vertebral ring, spring, spring seat and clasp, auxiliary seals have "o" shaped rubber ring and PTFE wedge ring, quiet ring for graphite materials (M106K).
现有轴头密封动、静接触面易碎、易损，不耐磨。
The prior shaft head seals have the defects of easily broken, damaged and worn dynamic and static contact surface.
现有轴头密封动、静接触面易碎、易损，不耐磨。
The prior shaft head seals have the defects of easily broken, damaged and worn dynamic and static contact surface.
应用推荐