湿法制备的粉料具有纯度高、粒度小且分布均匀、活性高等特点，能够弥补陶瓷法的不足。
With the advantage of high purity, small particle size, uniform size distribution and high sintering activity, wet method can compensate the shortcomings of dry process.
本文采用粉末冶金法研制了PZT系独石型梯度功能压电陶瓷驱动器。
A monolithic piezoelectric actuator based on functionally gradient PZT ceramics was prepared by powder metallurgical process.
采用溶胶-水热法，在较低的温度下已成功地合成了多种结晶良好的纳米或亚微米钛基钙钛矿型陶瓷粉体。
Many kinds of well-crystallized nanometer or submicron Ti -based perovskite ceramic powders were already synthesized successfully by sol-hydrothermal method at lower temperatures.
试验结果表明，采用较大的法向压力或适当增大磨削速度等磨削参数，可以高效发挥陶瓷刚玉砂带的磨削性能。
The results indicate that increasing the vertical pressure or grinding speed is beneficial to the grinding process of ceramic corundum abrasive belt.
采用化学反应法，在普通碳素钢上涂覆一层均匀致密的陶瓷涂层。
The carbon steel sample is coated with a uniform dense ceramic layer by chemical reaction method.
探讨了干压成形法对特种陶瓷密度的各种影响因素。
This paper discussed the different influences of dry pressing on the densification of special ceramics.
目的：探讨利用溶胶凝胶法进行纳米硅涂层表面改性对玻璃渗透氧化铝陶瓷粘结强度的影响。
Objective: Aim of this study was to evaluate the effect of silica coating with sol-gel process on bonding strength between glass infiltrated alumina ceramic and resin luting cement.
采用稀土改进的化学镀法在多孔陶瓷载体上共沉积钯-银合金膜。
Rare earth improved electroless plating method was developed for simultaneously depositing Pd-Ag alloy film on ceramic support.
研究用热化学反应法在金属表面制备陶瓷涂层的工艺，并对涂层的相结构及显微组织进行分析。
The fabricating process of metallic ceramic coatings by thermochemical reaction method was studied. The phase structure and microstructure of the coatings were also investigated in this paper.
陶瓷薄膜的制备技术多种多样，如物理气相沉积、化学气相沉积、高温烧结和“溶胶-凝胶”法等。
There are many techniques for fabricating ceramic films such as PVD, CVD, high-temperature sintering and sol-gel method.
采用热化学反应法在Q235钢上制备纳米复合陶瓷涂层，对涂层进行结构分析及性能测试。
Nano-scale composite ceramic coating on Q235 was fabricated by thermochemical reaction method, and then structural analysis and performance test were conducted of the coating.
用热等静压法烧结制备了高导电性ZAO（铝掺杂氧化锌）陶瓷靶材，并用直流磁控溅射法制备出ZAO透明导电薄膜。
Aluminum-doped zinc oxide (ZAO) ceramic targets for sputtering were fabricated by hot isostatic pressing (HIP) and ZAO transparent conducting thin films were prepared by dc magnetron sputtering.
运用有限元法分析了不同入口锥角的陶瓷喷砂嘴冲蚀过程中的应力状态。
The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .
以固体光声效应的RG理论为依据，用光声法测量了压电陶瓷材料PZT的热参量。
According to the RG theory of the photoacoustic effect with solids, the thermal parameters of PZT ceramic material have been measured by using photoacoustic method.
应用压电陶瓷振动台振动钻削装置，采用变进给量振动钻削法加工微小孔，并用工具显微镜对入钻定位误差和出口毛刺进行测量。
By applying apparatus for piezoelectric ceramic vibration drilling, the method of varying feed rates in vibration drilling is used to drill the micro-hole.
本文探索了一种低散热发动机陶瓷表面传热的实验研究方法—表面温度法。
An experimental researching method-surface temperature method for heat transfer on ceramic coat in low-heat-rejection engine was developed.
采用田口试验法来获取陶瓷球双自转研磨盘研磨方式的最佳工艺参数，以及各参数对研磨指标的贡献率。
This paper focuses on the application of Taguchi method to optimize the technique parameters to lap ceramic ball.
溶胶凝胶工艺尤其适合制作传统的熔融法不能或不易获得的功能陶瓷纤维。
Solgel process was specially suitable for preparing the functional ceramic fibers which was very difficult or even could not be obtained by the conventional melting method.
实验采用红外辐射测温法测出了多孔陶瓷燃烧器中预混火焰沿气流方向的温度分布曲线。
The temperature distribution in flow direction of a premixed flame in a porous ceramic combustor is experimentally being measured by infrared radiation.
用微等离子体氧化法在钛金属基体上制备钛酸锶钡(BST)陶瓷膜。
Barium strontium titanate (BST) ceramic film is prepared on titanium substrate by micro-plasma oxidation.
冯澍的作品“后昆虫时代”被意大利国际陶瓷博物馆、广州美术馆、意大利法恩扎国际陶瓷博物馆等收藏。
Feng Shu's work has been collected by the International Museum of China, Shanghai MoMa, Guangzhou Art Gallery, and the International Ceramics Museum Fanza (Italy).
本文主要介绍了流延法生产氧化铝陶瓷基板的工艺。
This paper introduced the production process of aluminum ceramics Substrate.
柠檬酸盐溶液酒精脱水法是化学制备陶瓷粉料的一种方法。
Alcohol dehydration of citrate solutions is one of the chemical methods for praparingceramic powders.
景德镇陶瓷美术作品属于著作权法规定的美术作品，受著作权法的保护。
Jingdezhen porcelain art articles belong to the art articles prescribed by the copyright Lawsand under their protection.
固相反应法和草酸盐分解法是制备钙钛矿功能陶瓷的常用方法。
The general methods of making perovskite functional ceramics are solid phase reaction and oxalate decompound.
实验采用单光路临界角法，用四象限探测器探测输出信号，物面微位移采用压电陶瓷作为驱动元件。
The experiment came into use single light path critical angle method, output signals were detected by four-quadrant receiver, micro-displacement drive element were piezoelectric ceramics.
首次采用一次原位水热晶化法在多孔陶瓷载体表面成功制备出TS - 1沸石分子筛膜。
The TS-1 zeolite membrane was successfully obtained on the ceramic carriers by one-step in-situ hydrothermal synthesis.
首次采用一次原位水热晶化法在多孔陶瓷载体表面成功制备出TS - 1沸石分子筛膜。
The TS-1 zeolite membrane was successfully obtained on the ceramic carriers by one-step in-situ hydrothermal synthesis.
应用推荐