机器模具铸造工和核心制造者设立，调整和经营各种制模机和制芯机，制造砂，陶瓷模具和核心。
Machine mouldmakers and coremakers set up, adjust and operate various mouldmaking and coremaking machines to make sand and ceramics moulds and cores.
对r 03电池的普通合金模与氧化锆陶瓷模的性能进行了对比，指出氧化锆陶瓷模性能优良，具有一定的经济价值。
And the performance of common metal mould and zirconia ceramic mould for R03 batteries was compared. It was pointed out the zirconia ceramic mou ld for battery had good performance and economic value.
凝胶注模成型技术是一种近净尺寸陶瓷成型技术，它为解决陶瓷材料的加工成型问题提供了一条十分有效的工艺途径。
Gelcasting is a novel and near net-shape forming technique for ceramics, which has provided an effective approach for resolving difficulties of machining and forming for ceramics.
直接利用激光快速成型的原型树脂模，结合陶瓷型精密铸造技术，制得了高精度、低表面粗糙度、高使用寿命的钢模具。
The steel dies with high dimensional accuracy, low surface roughness and long service life have been quickly produced by using prototyping resin molds as patterns of ceramic investment casting.
采用低毒的N羟甲基丙烯酰胺体系凝胶注模成型氧化铝陶瓷，研究了该体系下浓悬浮体的制备及固化过程。
The alumina ceramics is gel-mould cast with low toxic N methylolacrylamide system. This paper reports the investigation on the preparation of alumina suspension and its solidification process.
直接凝固注模成型是一种崭新的净尺寸陶瓷成型概念。
Direct coagulation Casting (DCC) is a novel near net shape process concept for ceramic Materials.
在陶瓷材料先进成型技术中，凝胶注模成型是制备大尺寸、复杂形状坯体的一种有效方法。
Gelcasting is one of the most promising methods among all the advanced ceramic forming techniques.
采用熔模、陶瓷型铸造工艺来制造小型水轮机叶片和水斗是一种最佳的选择。
Investment cast and ceram cast are best technology for the fabrication blade and bucket of small turbine.
胶注模成型工艺中是形成坯体和得到较高性能熔石英陶瓷的基础。
Gelation process is the foundation to form body and to get high-performance fused quartz ceramics.
介绍了陶瓷型铸造制模的工艺过程和工艺特点，并指出了陶瓷型铸件常见缺陷及防止方法。
Introduced molding process and characteristics of ceramic die-casting technology, and pointed out prevention for the ceramic die-casting common defects.
介绍了凝胶注模成型技术的起源、基本原理、分类、工艺流程、工艺特点以及陶瓷浆料的稳定机制。
This report introduces the gel-casting technique to note the stable mechanism of the ceramics slurry, craft of the origins, basic principle, classification, flow and characteristic of the technique.
本文用改性淀粉原位凝胶注模成型技术制备了具有较高强度和均匀性良好的氧化铝陶瓷坯体。
To achieve in-situ consolidation forming of Al_2O_3 ceramics, the gel network formed by swelling and gelatinization of the modified starch when heated was used in this study.
直接凝固注模成型(DCC)是一种全新概念的净尺寸陶瓷成型技术。
Direct coagulation casting (DCC) is a novel ceramic net shape forming process for ceramic green bodies.
结果表明，影响凝胶注模陶瓷坯片密度的因素主要有：料浆的固含量、单体含量、单体和胶联剂的比值。
The research showed that the solid loading, content of monomer and ratio of monomer and crossing linker were the main effect factors on the density.
本文研究了陶瓷泥浆性能、石膏模性能和外界条件等因素对陶瓷泥浆吸浆速度的影响。实验表明影响泥浆吸浆速度的因素是复杂的，多方面的。
Influence of ceramic slip properties, plaster mould properties, operating conditions etc. on absorption slip rate of ceramic slip are investigated. Experiments prove that the factors are complicated.
一个压电陶瓷振子含有无限个振模，而常常应用其一个或数个，对于其它不需要的模式，必须加以抑制。
A piezoceramic vibrator has infinite number of vibration modes, but usually only one or a few of them are used and all the other undesirable modes must be suppressed.
介绍了一种螺旋钢丝冷拨模用的新型金属陶瓷材料，对材料的组织和性能进行了分析。
The paper deals with a new type of ceramic material for dies of drawing steel wires with spiral grooves, and the structure and properties of material MC5 are analyzed.
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics is presented.
本文采用水基料浆凝胶注模法制备出了高质量的氧化锆陶瓷刀具。
Zirconia ceramic knives of high qualities ceramic knives were prepared using aqueous gel-casting method in this paper.
前言： 针对EPS陶瓷壳型精铸失模时容易裂壳的现象，对EPS消失模精密铸造工艺进行了研究。
Respecting the cracking phenomenon of ceramic shell, the pattern removing technique of EPS mold was investigated.
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics...
原来由凹陷模芯所占据的位置变成空位陶瓷器就成了凹陷形状。
The position occupied by the concave die core originally becomes concave shape when changing into vacant ceramic product.
用来烘干陶瓷半成品、石膏模、匣体取代锅炉蒸汽干燥，节能显著。
It can save the energy effectively and can be used to dry the biscuit. plaster model and cell instead of boiler st…
用来烘干陶瓷半成品、石膏模、匣体取代锅炉蒸汽干燥，节能显著。
It can save the energy effectively and can be used to dry the biscuit. plaster model and cell instead of boiler st…
应用推荐