运用压电陶瓷传感器与压电驱动器结合的方法。
That was used piezoelectric ceramics which was in combine with piezoelectric ceramics driver.
对结构材料与压电陶瓷传感器的应力应变传递关系进行了研究。
The strain transfer factor, k , is proposed for the characterization of the deformation transfer from the material measured to the sensor.
研究表明，压电陶瓷传感器在岩土力学研究和工程实践中有广阔的应用前景。
It was shown that piezoelectric sensors could be widely and effectively used in researches and practices of geotechnical engineering.
压电陶瓷传感器在岩土工程中有很多应用，尤其是通过测量波速来确定土的性质方面。
Piezoelectric sensors have been widely applied in geotechnical engineering, especially in characterizing soils through measurement of wave velocities.
利用结构对称的双压电陶瓷传感器实现了切变力的探测，并为探针-样品的间距控制与成像提供了一种有效手段。
Shear force detection is carried out by using a symmetric piezoelectric bimorph sensor, which provides an easy way not only for probe-surface distance control but also for imaging.
且测量膜片与介质大面积接触，不易堵塞，便于清洗，进一步发挥了陶瓷传感器抗腐蚀性能好的技术特点和较经济的优势。
Large and medium diaphragm and measuring contact, jam, easy cleaning, further play a ceramic sensors, corrosion resistance and good technical characteristics of economic advantages.
当前我们研究的重点是评估铂/陶瓷氧传感器在寒冷气候的可行性。
The current focus of our research is assessing the viability of standard platinum/ceramic oxygen sensors in cold-weather climates.
摘要介绍了鞋垫式足底压力分布测量系统中压电陶瓷力传感器的设计过程。
The design process of the piezoelectric force sensor in the insole plantar pressure distribution measurement system was introduced.
本文介绍应用溶凝胶工艺制备离子传感器的敏感材料NASICON，并与传统的陶瓷工艺作了比较。
The NASICON sensitive materials for ionics sensors were prepared by sol-gel process and the process was compared with the conventional ceramic process.
本文介绍了自行设计与研制的陶瓷压力传感器。
In this paper, a self-designed and developed ceramic pressure transducer is described.
媒介接触传感器的陶瓷表头直接。
The medium contacts the sensor's ceramic gauge head directly.
本文研讨了一种新型陶瓷电容压力传感器的CAD方法。
CAD meth od for ceramic capacitance pressure transducer is studied.
试验研究了摩托车在EUIII测试循环工况下的排气温度变化，以及对于两种氧传感器起燃时间、陶瓷体温度变化、动态响应特性和排放的影响。
The exhaust gas temperatures rise and variation during EUIII test cycle and its impact on the light-off time, ceramic temperature, dynamic response behavior and emission results were studied.
利用压电陶瓷技术，设计并制备整体式多阵列压力传感器，并用于爆炸冲击波压应力的测试。
Planar array and monoblock type pressure gauges were designed and prepared by piezoelectric ceramics, which were used to measure pressure of explosive blast successfully.
此时，压电陶瓷PZT的探针是抵在传感器膜片的中心点处，如果使用均布载荷模型进行计算和分析，将会产生较大的误差。
Then, PZT piezoelectric ceramics sensor's probe is contact with the center of diaphragm, if we use the uniform load model to calculate and analyze, it will cause error in micro displacement detection.
该型403系列压力变送器，其独特的陶瓷杠杆成熟技术，调整，温度补偿传感器信号，作为一个电压输出。
The type 403 series pressure transmitters, with its unique proven ceramic lever technology, has adjusted, temperature-compensated sensor signals, available as a voltage output.
研究了粘贴式光纤布拉格光栅应变传感器对柔性梁的动态响应特性，并用压电陶瓷加速度传感器作对照。
Dynamic strain of flexible beam was measured by pasted FBG strain sensor, and the results were compared with that by acceleration sensor of piezoelectric ceramic.
介绍了鞋垫式足底压力分布测量系统中压电陶瓷力传感器的设计过程。
The design process of the piezoelectric force sensor in the insole plantar pressure distribution measurement system was introduced.
介绍了一种采用陶瓷基座、陶瓷膜片制备的压力传感器。
Ceramic piezoresistive pressure transducer and a method for making it are disclosed.
论述了单音片传感器测量液体粘度的原理及结构特点，它是利用压电陶瓷的自激振动激励单音片在液体中振动，从而测得液体粘度。
The measuring principle and structure characteristic of the monotone plate vibration sensor, which can be used to measure the viscosity of liquid, are described.
结构陶瓷作为零力学滞后、低介电绝缘材料，在压力传感器中应用可以降低压力传感器的蠕变现象。提高其反应速度。
Structure ceramics being a low mechanical hysteresis and dielectric insulating material, a pressure transducer cut down creep, and increased reaction speed.
为人们提供了一种获得陶瓷气体传感器可靠性指标的简便、可靠的方法。
A convenient and reliable method is presented to know the reliability standard of a ceramic gas sensor.
提出并设计完成了金属铠装结构的FBG温度传感器和类陶瓷封装结构的FBG温度传感器。
We have designed and fabricated metal armoured FBG temperature sensor and ceramic FBG temperature sensor.
与用普通压电陶瓷片或电感线圈构成的振动传感器相比，这种传感器的灵敏度更高，频率响应宽。
Compared with piezoelectric ceramic vibration pickup or inductance vibration pickup, this vibration pickup has higher sensibility, more widely frequency response.
本浆料可印刷在陶瓷基片上，通过高温烧结后得到高应变系数的厚膜力敏传感器。
The inventive slurry can be plated on the ceramic basic plate to be sintered in high temperature to prepare the thick-film force sensor with high gage factor.
本文采用压电陶瓷作为传感器和执行器，对二维柔性板的振动抑制进行了实验研究。
In this paper an active vibration control system of 2d flexible plate is presented by using piezoelectric sensors and actuators.
另外厚膜电容式压力传感器还有一种重要的应用，它可以用来对位移进行测量，例如对压电陶瓷PZT的精密位移测量。
There is also an important application that can be used to measure displacement, for instance, PZT piezoelectric ceramic precision displacement measurement.
另外厚膜电容式压力传感器还有一种重要的应用，它可以用来对位移进行测量，例如对压电陶瓷PZT的精密位移测量。
There is also an important application that can be used to measure displacement, for instance, PZT piezoelectric ceramic precision displacement measurement.
应用推荐