测定了环流循环除尘系统内的静压分布。
The pressure distributions of the circumfluent cyclone system (CFCS) are studied experimentally in detail.
本文介绍一种PLC控制的静电除尘系统。
This paper introduces the application of PLC controller in static electricity dusting system.
小喷嘴：雾化喷嘴是水雾除尘系统的关键部分之一。
Small nozzle: Atomizer mist dust removal system is a key part of.
本文介绍了干熄焦除尘系统的基本构成和工艺特点。
This paper describes the basic constituent and process feature of the de-dusting system for CDQ.
通风除尘系统的合理设计为喷锌生产线的无尘化生产提供了保证。
The proper design of the ventilation dusting system provides guarantee for non-dust production of production line of spraying zinc.
物料输送系统和通风除尘系统是小麦加工工程中的重要组成部分。
Material conveying system, and aeration and dedusting system are also the main parts of wheat processing.
为了使锅炉的烟尘达到国家排放标准，需要在采暖锅炉上安装除尘系统。
We should fix the system of removing dust, in order to reach the national standard of the dust of the discharged boiler.
】本文讲述了高压变频器在炼铁除尘系统中的改造分析以及经济效益分析。
This article narrated the high-pressured frequency changer in iron-smelting dust removal system transformation analysis as well as the economic efficiency analysis.
介绍了宣钢第一轧钢厂热带车间热带精轧过程中烟气除尘系统的方案设计。
The plan design of smoke dust collecting system in hot strip finishing rolling in Hot Strip Workshop of No.
分析了干熄焦除尘系统存在的问题，对环境除尘系统的改造过程做了详述。
Analyzed the existing problems in CDQ emission control system, detailed the modification process of environmental emission control system.
本课题采用的闭路循环式密闭通风除尘系统，使用环隙喷吹脉冲滤袋除尘器。
The effectiveness of an air tight ventilatory dust exhaustive system with closed circuit cycle and pulse fissure blow filter bag was studied.
本文从除尘系统的设计入手，对运行中存在的问题进行了分析，提出整改建议。
This article starts from the design of dedusting system, analyzing the existing problems during operation and putting forward to some Suggestions to solve the problems.
实际应用表明：除尘系统及降尘措施设计合理，运行可靠，具有较好的降尘效果。
The actual application showed that the design of dust removal system and dust prevention measures is reasonable, they operate reliably and have better dust removal effect.
总结论述了炼钢电炉除尘系统的确定，以及电炉除尘系统设计应注意的几个问题。
The author sum and discuss the electric- arc furnaces dedust system in steelwoks, and some remarkabel problerns in electric- arc furnaces dedust system.
大型除尘系统风机通常采用串液力耦合器的方式来实现风机电机的轻载启动和调速。
For Large dust removing fan system, fluid coupler is usually used to reduce the starting load and adjust the speed of the motor.
通风除尘系统采用组合风网、布筒除尘器最终净化方式，确保车间内外的环境卫生。
Aeration and dedusting system applied combined dedusting design to ensure the environment cleaning.
简介磷铵干燥尾气湿法除尘系统工艺改进，及其在实践中应用效果创造的经济效益。
The improvement of removal dust from drier waste gas by wet process in ap plant has been briefly introduced and economic beneficial results are analysized in this paper.
针对双文氏管湿法除尘系统一级文氏管喉口存在的问题，开发设计了矩形定径式喉口。
Based on the problems existed in Venturi tube throat of double Venturi tube wet cleaning system, the rectangle sizing throat is developed and designed.
原粗煤气除尘系统分离效果不好，给后续的CO变换系统的正常运行带来了许多困难。
The separation efficiency of the original dedust system for the raw gas is bad, so that many difficulties are come to the normal operation of the CO shift system.
提出了除尘系统的设计原则和计算方法，为正确选择、合理配置除尘系统提供了设计依据。
The designing principle and calculating method about the dust removing system were pointed out, the basis for choosing and designing the dust removing system correctly was provided.
介绍了某耐火镁碳砖车间粗碎工艺、除尘系统的运行状况及除尘效果。并提出了改进建议。
The roughing technology of a magnesia and carbon brick shop, the carrying condition of the dust control system and the dust effect is introduced in this paper.
将PLC和触摸屏相结合，对静电水膜除尘系统进行了设计，实现了除尘系统的自动控制。
The design of electrostatic water membrane dedusting system is realized based on PLC and touching screen.
在石墨加工除尘系统的基础上，为适应塞棒加工，改造其除尘装置，以改善工人的劳动环境。
On the basis of reform on the dusting system of graphite machining, using inserting pole processing, the work circumstance of workers are improved.
在纺织厂除尘系统中，粉尘爆炸将会造成很大的危害，除尘设备的防爆是目前急待解决的问题。
Dust explosion could make a great damages in dust filter system in textile mill, so the problem of explosion prevention should be solved.
本文浅析了旋风麻石水膜除尘机理，通过对湘衡盐矿锅炉除尘系统的改造，探讨系统运行效果。
It analyzed mechanism of cyclone water film dust removal, and discussed the work effect according to renovation on the Xiangheng Salt Mine boiler dust removal system.
研究开发一套惯性旋风体逆流式颗粒层除尘系统，介绍该系统的结构、原理、性能及主要参数。
The research developed a set of inertia tornado body to move the bed granular layer dust removal system, introduced this system structure, the principle, the performance and the main parameter.
其研究成果可以用于其他工程设计项目，对提高我国通风除尘系统的设计质量有一定的现实意义。
The result of this project may be a good reference for other projects and on the other hand it will probably be beneficial to promoting design quality in ventilating systems.
目前，气力输送与除尘技术相结合构成的气力除尘系统已在木材加工行业中占有举足轻重的地位。
At present, the pneumatic dust collection system constituted of the pneumatic conveyor technology and the dust removal technology already to hold the pivotal status in the woodworking industry.
目前，气力输送与除尘技术相结合构成的气力除尘系统已在木材加工行业中占有举足轻重的地位。
At present, the pneumatic dust collection system constituted of the pneumatic conveyor technology and the dust removal technology already to hold the pivotal status in the woodworking industry.
应用推荐