提出了一种电解加工工具阴极设计的新方法。
A new method of designing tool cathode in the electrochemical machining (ECM) is present in the paper.
阴极设计是电解加工首先要解决的问题，也是电解加工中难以解决的问题。
The problem of cathode design is the key and difficult one should be solved first.
研究结果表明，该阴极设计方法可行，设计计算误差较小，可以快速准确地设计出复杂的阴极形状。
The research results show that the design method is feasible, the error of designing calculation is smaller, and the complicated cathode shapes can be designed quickly and accurate.
介绍了一种特殊齿形的内齿的电化学仿型加工，介绍了相关的工装夹具设计，工具阴极设计和修正以及加工工艺参数。
This paper introduces electrochemical copying method for inner teeth machining as well as clamping apparatus and the tool cathode design. In addition, the technological parameters are given.
设计研制了一种用于干湿交替环境下，自动采集阴极保护电位数据的装置。
A device used for automatic collection of cathodic protection potential data in cyclic wet-dry environments was designed and manufactured.
阴极保护是抑制腐蚀最有效的方法之一，但需合理设计、安装和维护。
Cathode protection is one of the most effective methods for suppressing corrosion, while reasonable design, installation and maintenance are very necessary.
通过设计阴极与砂轮廓形的对比，分析了成形砂轮轮廓形状，修整电压和电解液电导率对设计阴极形状的影响。
Comparing design cathode with wheel profile shape, effects of dressing parameters, wheel profile, dressing voltage and conductance on design cathode profile were studied.
本方法不但缩短了复杂型面成型阴极的设计时间，还能为以后阴极形状的修改提供便利。
This method not only shortens the time of designing complex surface of contour cathode, but also provides a convenience to modify the shape of the cathode later on.
通过阳极边界电场强度的分析与对比，进一步验证所设计的阴极形状，评价阴极的设计精度。
Through the analysis and contrast of the electric - field intensity on the anode boundary, the cathode shape designed is tested further and its accuracy is evaluated.
另外压载水舱内部结构复杂，“屏蔽效应”对保护电流分布的影响也成为阴极保护设计中的关键问题。
In addition, inside structure of ballast water tank is very complex, shield effect to protective current also becomes a key problem in cathodic protection design.
根据电解成形理论设计阴极工具形状，用于金属结合剂成形金刚石砂轮的电解修整。
Cathode tool shape, used for electrolytic dressing of metal-bonded diamond profile wheels, was designed based on electrolytic machining theory.
计算结果和测量结果基本一致，为优化阴极保护设计提供了理论依据。
The results can be used to provide a theoretical foundation to design an optimal cathodic protection.
根据强流电子光学理论，在填充等离子体条件下，设计平面阴极电子枪。
To design electron guns with plane cathode according to high current electron optics theory.
介绍了阴极电泳漆烘干过程中废气的来源，提出了废气处理设备的设计原则。
This paper introduced the source of exhaust gas from cathodic electrodeposition primer in baking, and gave the design principle of disposal equipments.
工程技术部还提供阴极保护设计、咨询；管道检测、清管、带压封堵技术咨询、翻译等服务。
Our engineering department provides cathodic protection system design, as well as other technologies such as pipeline pigging, hot tapping and plugging consultation.
本文研究了海洋结构物阴极保护优化设计问题。
In this thesis, optimization design of cathodic protection system for Marine structure has been studied.
根据电解成形理论设计阴极，用于金属结合剂成形金刚石砂轮的电解修整。
The cathode tool shapes, engaged in electrolytic dressing of metal-bonded diamond wheels, were designed based on electrolytic machining theory.
在从始极片向不锈钢阴极(psc)的工艺改造过程中，保尔·沃特提出了一种基于METRO理念的现代铜精炼电解设计。
PAULWURTH came up with a modernization design of copper electro-refining based on METRO concept, used for the conversion from starting sheet to permanent steel cathode (PSC) process.
利用图形化的DLC薄膜作为阴极，设计和制作了矩阵选址单色场发射显示器（FED）样管。
On the base of fabrication of the patterned DLC thin film cathode, a ki nd of matrix -addressed diode FED prototype is designed and packaged.
研究设计了试验室测量海水中金属结构物阴极保护电位及其分布的模拟装置。
A kind of simulating set was put forth to measure the cathode protection potential and its distribution of offshore steel structures in lab.
概述了电磁特征信号的来源、危害，介绍了轴接地、阴极保护系统的设计和滤波、消磁等消除或减少电磁特征信号的技术措施。
The measures to eliminate and mitigate the electromagnetic signature such as shaft grounding, design of cathodic protection system and degaussing wer.
分析钢质套管对埋地管道阴极保护影响的原因，提出管道设计施工、阴极保护系统设计施工中与此有关的改进意见。
The causes of influence of steel casing on cathodic protection of buried pipelines are analyzed. Some Suggestions about design and installation of pipeline and cathodic protection are put forward.
文中采用数值迭代法和建立等效电流模型，对P_B层结构参数和门极-阴极几何图形尺寸进行了合理设计。
Reasonable designs of the structure parameters of PB layer and the gate-cathode geometry are obtained by numerical iteration and an equivalent current model.
分析比较了溅射离子泵、冷阴极电离超高真空计、热阴极电离超高真空计等作为真空保护传感器的不同电子学设计。
The electronic circuitry of the various vacuum protection schemes, which use sputtering ion pump or cold-cathode or hot cathode ionization gauge as sensors, was compared.
首先提出真空管道自体真空镀膜新概念，采用特殊的阴极靶结构设计成功的解决了长管道内表面直流溅射镀膜的难题。
The new concept of the vacuum pipe sputter self-coating is introduced first, and special cathode target structure is introduced to get favorable coating.
以侧导式冷阴极灯背光照明系统为例，介绍了传统背光照明系统的基本构成和性能及设计趋势。
Taking the lateral-guided cold-cathode fluorescent lamp backlighting system for example the configuration and performance of the conventional backlighting system are introduced.
论文提供了一种计算机辅助阴极工具设计方法。
Above research can provide one method for computer aided cathode design.
协助您提供阴极保护工程的勘探、设计、施工、技术咨询等相关业务。
Assist you provides cathodic protection engineering exploration, design, construction, technology consultation and related business.
协助您提供阴极保护工程的勘探、设计、施工、技术咨询等相关业务。
Assist you provides cathodic protection engineering exploration, design, construction, technology consultation and related business.
应用推荐