因此说，阳极质量是大型预焙槽的正常运行的关键因素之一。
Thus the anode quality is one of the key factors influencing the proper operation of the reduction cell.
阳极质量直接影响阳极电流密度的提高及电解系列强化电流；
The quality of the anode has direct influence on the density and efficiency of the electric current in the cell.
论述预焙阳极质量对铝电解生产的影响，提出减少阳极炭渣的有效方法。
The effects of the quality of pre-baked anode on the aluminum electrolysis production are described, and an effective method of reducing carbon deposits on the anode is proposed.
主要探讨了影响电镀铜用磷铜阳极质量的因素，包括原材料、铜晶粒结构、磷含量及阳极表面的清洁。
The plating conditions show great influences on the P content of the coatings and thus the corrosion resistance.
硬，飞机铝阳极氧化膜的质量使SL56最艰难的，但最轻和c -面编码器可用。
Hard, anodized aluminum of aircraft quality makes the SL56 the toughest, yet lightest, C-Face encoder available.
介绍了自焙铝电解槽生产中，因阳极糊质量问题产生的危害，对其发生原因进行了分析，并总结了应采取措施。
The paper introduces the bad result caused by anode mix quality during soderberg electrolytic Aluminium cell production, analyzes its cause and summarizes the measures should be applied.
Z轴采用表面阳极化航空铝合金，温度一致性极佳；并降低了运动部件的质量，减少测量机在高速运行时的惯性。
Cross beam and Axis Z are made of surface-anodized aerometal to improve thermal stability and reduce moving mass for faster setting.
探讨了阳极电流密度、抛光温度、抛光时间和搅拌方式对抛光质量的影响。
The influence of anode current density, polishing temperature, polishing time and stirring modes on polishing quality was discussed.
本文评述了延迟焦中的杂质（包括金属杂质与非金属杂质）对炼铝用阳极和炼钢用石墨电极质量的影响。
In this paper, the influence of impurities (including metallic and nonmetallic impurities)of delayed pretroleum coke on the quality of anode and graphite electrode was evaluated.
预焙阳极铝电解槽用炭素阳极的质量对铝电解生产的技术经济指标具有重要影响。
Carbon anode quality for aluminium electrolysis pot With pre-baking anodes has important effect on technical and economic indexes in aluminium electrolysis production.
对铝型材进行化学砂面和阳极氧化复合工艺实验，探讨了复合工艺中各因素对鈻型材表面质量的影响。
Technology of chemical coursing and anodic oxidation for shaped al materials was studied. Vanous factors influencing the surface quality of shaped al materials are discussed.
这些零件的质量是很好的很好的机械部件和充分碳阳极铝合金红色部分。
The quality of the parts is very good with nicely machined full carbon parts and red anodised aluminium alloy parts.
研究表明：影响阳极炭块优化处理质量的主要因素是焙烧时间、溶液浓度和浸渍时间。
The results show: the main factors affecting the quality of electrolyze aluminum anode carbon lump are roasting time, solution concentration and immersion time.
在炭素阳极生产中，自动过程控制水平的高低将会直接影响到产品的质量。
For production of high quality carbon anode, auto control level plays an important role.
此系列LED用于室内室外照明，灯体采用高质量铝材，表面阳极氧化处理。
This series LED is used for indoor and outdoor lighting, the light body using high quality aluminum, surface anodic oxidation process.
探讨了影响铸铝阳极氧化染色质量的因素，据此优化工艺，找出得到最佳膜层的方法。
Make an approach to the factors that effect the quality of cast aluminium positive pole oxidized colouring, based on this optimum technology, find out the way of getting the optimum membrane layer.
新设计的阳极旋转系统提高了镀覆效率，保证了镀层质量。
The newly designed rotating system of anode increased the efficiency of plating and the quality of plating layer was guaranteed as well.
温度场的分布是影响碳阳极生产质量的关键因素。
The temperature distribution pattern was one of the key factors affecting the quality of baked anodic carbon.
为减小陶瓷板件切口宽度，提高切口质量，采用水箍和磁场对附加阳极等离子弧进行综合二次约束。
In order to reduce the kerf width and improve the kerf quality, the hydromagnetically confined plasma arc was used to cut engineering ceramic plates.
试验结果表明，改进除油、水洗、铬酸阳极氧化工艺和封闭处理方法后，工艺质量有了明显提高。
The experiment results indicated that the pro- cess quality has been improved obviously by the new process proposed by this paper.
不要把阳极棒拆下并长期不用，否则将造成任何明示或默示的质量保证条款实效。
Do not remove this rod permanently as it will void any warranties, stated or implied.
提出了石墨阳极生产应维持现有生产能力，进一步提高质量的设想。
It is proposed that tbe production present capacity of Graphiteanode shall be kept and the quality of graphite anode shall be promoted.
对预焙阳极生产实践中影响产品质量的情况、采取措施进行了阐述，并就今后产品质量的提高提出一些看法。
The product quality and taking measurement are expounded in production practice of prebaked anode, the thinking of raising product quality is put forward.
本热水器采用金属镁阳极棒，有利于延长内胆的使用寿命。无论什么原因拆卸这种阳极棒，都使得本热水器的质量保证无效。
Magnesium anode is used to extend tank life. Removal of this anode for any purpose will nullify the warranty.
本文分析了被广泛应用的铝和铝合金制品的防护与装饰方法——阳极氧化法的主要工序中的机理以及影响制品防护性能与着色质量的因素。
In this paper, the principles of the main processes of anodic oxidation method are analysed, and the factors which affect the protecting performance and coloring quality are also analysed.
阳极氧化膜是电解电容器的工作介质，其质量的优劣直接影响着铝电解电容器的性能。
The anode oxide film has a very strong effect on the performances of aluminium electrolytic capacitor.
为确保达成公司已有的产品质量标准，对阳极化，振动，超声波处理和其他表面处理线的生产设备进行参数设置，调整和故障解决。
Sets up, adjusts and troubleshoots for anodize, vibratory, ultrasonic cleaning and other finishing operation equipment in order to achieve company established quality standards on products.
暗室通风孔不同于低质量的塑料通风孔塑料通风口，是由炭黑阳极化处理的铝制造而成，装配RLS模压格子护罩来阻挡雨水或异物。
Darkroom vents are made of fine quality black anodized aluminum, unlike low quality plastic vents, with the RLS die-stamped grilled shield to keep out rain or foreign objects.
暗室通风孔不同于低质量的塑料通风孔塑料通风口，是由炭黑阳极化处理的铝制造而成，装配RLS模压格子护罩来阻挡雨水或异物。
Darkroom vents are made of fine quality black anodized aluminum, unlike low quality plastic vents, with the RLS die-stamped grilled shield to keep out rain or foreign objects.
应用推荐