从语言学，。心理学和教育学等方面阐述动机对学习的影响，进一步证明研究学习动机的重要性和必要性。
It summaries the research by forefathers on motivation and further proves its importance and necessity based on the influence of linguistics, psychology and pedagogy, etc.
基于发动机感应性能测试结论，为速度控制和保护而工作的软、硬件实现也在本文中被阐述。
Also, the implementation of the hardware and software for speed control and protection with the results obtained from tests on induction motor performance is provided.
报告的下半部阐述了地方化的三个关键方面-分权化，城市成为经济增长的发动机，使城市更加易于居住。
The second half considers three key aspects of localization: decentralization, cities as the engine of economic growth, and making cities livable.
从分析国际企业进入中国物流市场的动机及竞争态势出发，对跨国竞争条件下我国物流企业的战略应对，进行了理论上的阐述。
Based on analyzing the motive and the com-petition situation of multinational corporations, the paper describes in theory the strategy of China logistics corporations in multination competition.
其次阐述何谓“行”，他所讲的“行”，就是躬身践行和行为动机。
Next elaborated what"the action"is, he does say"the action", fulfills with the behavior motive.
本文介绍了遥控驾驶靶车牵引车速度控制系统的组成和工作过程，阐述了车辆自动换档和发动机转速调节的控制方法。
Structure and the working process of a remote control vehicle for target towing were presented. Methods of control in automatic gear shifting and engine speed modulation were described.
在前言中阐述了本次课题的研究动机、对象、方法及意义。
In the preface, the author elaborates the motive, object, method and meaning of this work.
阐述了三相异步电动机杂散损耗的测定的几种方法，通过不同的测法分析了杂散损耗的大小，最后通过直流机反转法试验杂散损耗，进行测定分析。
The paper descirbes several methods for the measurement of the stray loss of thee-phase asynchronous motor, and analyzes the amount of thray loss by using different measuring ways.
文中阐述了无损检测新技术在固体发动机推进剂及多界面脱粘方面取得进展的部分情况。
Some information on the progress of new techniques of nondestructive testing (NDT) applied in solid rocket motor propulsion and de-bonding of multiple interface is discussed in this paper.
阐述QD 2853起动机电刷盒弹簧座原成型模的缺陷并进行改进。
Elaborates QD2853 generator electronics brush box spring place originally forming die flaw and makes improvement.
通过对肖像面貌的分析、归纳、对比传统与现代肖像联系与差异，阐述其生成的内在动机和方式。
It expatiates on the inherent motivation and way by analyzing, inducing the visages of portraits and comparing the connection and difference of traditional portraits and modern portraits.
阐述一种用于全电飞机机电作动系统的双绕组永磁无刷直流电动机。
A permanent magnet brushless DC motor was presented, which will be used for a Electro-Mechanical Actuator (EMA) in a All-Electric Aircraft(AEA).
请就本课程目前所论以电影记录文化的各种方式，撰文发挥阐述，您认为这些导演将其动机发挥到何程度？
Write an essay exploring the various ways that culture has been documented on film in this class thus far. What range of motivations have been expressed by the filmmakers you have seen?
阐述了其在异步电动机矢量控制系统中的实际应用。
The practical applications in the vector control system of asynchronous electrical motors are elaborated.
文章重点阐述利用无刷直流电动机构建的井下压力闭环实验装置和以无刷直流电动机为控制核心的软件平台。
The paper places emphasis on the closed-loop system of pressure based on BLDC motor and the correlative software.
该文阐述了电动机保护的配置原理，介绍了微机型电动机保护相对于分立元件式电动机保护的优越性，并从实例出发，说明了微机型电动机保护的优。
This paper introduces the principles of the protection in motor and states the advantages of protection in microcomputer relative to that schismatic component.
本文从液化石油气（LPG）的理化特性和燃烧特点出发，阐述了LPG作为发动机燃料的优缺点。
This paper discusses the advantages and disadvantages of LPG as engine fuel from its physical and chemical properties and combustion characteristics.
本文阐述了某型飞机发动机操纵系统地面模拟试验控制系统，它主要控制力矩电机去模拟油门杆上的速度和力以及模拟发动机输入轴的力矩。
This paper presents a simulation test control system of an airplane engine operating system, which control motor to simulate the force and velocity of throttle lever and the torque on axis.
本文阐述了交流电动机软起动控制器的控制原理，与常规的交流电动机起动控制器相比所具有的优点和特点。
This article describes the control principle of soft starter of alternate current electric motor, and the excellence and characteristic than normal starter.
通过对发动机曲轴轴颈与轴承损坏原因的分析，重点阐述了发动机在使用与维修中预防损坏的措施和方法。
By analyzing reasons for break of engine crankshaft journal and bearing, this paper describes mainly some countermeasures they are break in use and maintenance.
本文阐述一个可用于航空发动机数据检测和控制的光纤传输系统。
This paper deals with a optical fiber transmisson system being used for detecting and control of aeroengines.
阐述了其在异步电动机矢量控制系统中的实际应用。
It elaborated the practical applications of vector control system of asynchronous electric motors.
阐述了发动机过热的危害性，并对散热器及风扇等进行了结构改进。
The detriments of engine overheat are explained and the structures of fan and radiator are improved.
以具体滑坡工程为例，详细分析了该滑坡的工程地质条件，对其滑动机制进行了阐述。
By the example of the specific landslide, the sliding mechanics are expatiated on the basis of the detailed geologic conditions.
本文阐述了永磁同步电动机磁场定向矢量控制系统。
This paper presents a field-oriented vector control system for permanent magnet synchronous motor.
同时阐述了电动机电流测定的常用方法，如瞬时值的测定，积分测定等。
The common methods of current measurement for motor are presented, for example, instantaneous value measurement, integral measurement, etc.
阐述了低速大力矩直接驱动电动机的技术优势。
Firstly, the advantages of low speed high torque motor were introduced.
阐述了目前微燃烧发动机的研究进展。
The research development of the microcombustion engine is introduced.
阐述了螺旋桨和发动机转子转动惯量的计算方法，由进动产生的附加力矩或角速度的计算方法。
It sets forth the computing method of rotor moment of inertia of the propeller and engine as well as the computing method of additional moment or angular velocity produced by precession.
阐述了螺旋桨和发动机转子转动惯量的计算方法，由进动产生的附加力矩或角速度的计算方法。
It sets forth the computing method of rotor moment of inertia of the propeller and engine as well as the computing method of additional moment or angular velocity produced by precession.
应用推荐