在对闸瓦式制动器进行动力学分析的基础上，论述了它的设计方法和步骤，并给出了机械效益的计算公式和设计曲线图。
Based on dynamics analysis and brake shoe type arrester, its design method and steps are discussed in this paper. Calculation formula of mechanical benefit and design is introduced.
文章介绍了一种提升机盘式制动器闸瓦间隙在线监测装置软、硬件的设计和工作原理。
The paper introduced the design of hardware and software of a kind of on-line monitoring device for disk brake shoe-clearance of hoister and its working principle.
在车辆运行或维护过程中也会带来闸瓦的残渣，沙砾或者润滑油脂。
Brake shoe residue, sand and lubricants are often introduced by operating or maintenance processes.
本文对含磷蠕墨铸铁闸瓦的摩擦系数与耐磨性进行了系统的研究。
The friction coefficient and wear resistance of compacted graphite cast iron brake shoes with phosphorous are systematically investigated in this paper.
轮缘磨耗主要是轮轨相互作用的结果，而踏面上的凹槽磨耗可能主要由闸瓦制动引起。
The wheel flange wear is caused by the flange action of the wheel and rail, whereas the double-groove wear on tread may be mainly caused by the break shoe.
文章还介绍了闸瓦摩擦系数的在线监测。
This article also introduces the on-line monitor of the friction coefficient of the brake shoe.
在模拟矿井提升的工况下，实验测量闸瓦的动摩擦系数。
Experimental testing is used to measure the dynamic frictional coefficient of the brake-tile on the working condition of simulated promotion.
介绍了ST型双向闸瓦间隙调整器典型故障的原因分析及其预防措施。
Described are the analysis of causes to typical troubles in st 2-direction brake shoe slack adjuster and preventative measures.
通过材料分析、多种配方的对比及市场调查，最终确定适应市场需求的粉末冶金闸瓦的材料配方。
By material analysis, prescription contrast and market research, we finally find the powder metallurgy material prescription of brake shoe, which adapt to the market demand better.
本文介绍了一种基于无线通信的机车闸瓦压力采集系统，说明了其结构、功能、硬件、软件及其实现。
This paper introduces a pressure collection system of locomotive skid based on wireless communication, and then explains the structure, function, hardware, software and the realization of this system.
介绍了一种新型提升机智能闸瓦间隙监测仪。
Introduces a new kind inspect instrument of hoist brake clearance.
在对闸瓦式制动器进行动力学分析的基础上，论述了它的设计方法和步骤，并给出了机械效益的计算公式和设计曲线图。
Based on dynamics analysis and brake shoe type arrester, its design method and steps are discussed in this paper.
俄罗斯、日本根据使用条件不同，对机车和高速动车铸铁闸瓦的结构、工艺、材料方面进行了较大的改进。
The structures, technology and materials of cast iron brake shoes for locomotives and high speed motor cars are greatly improved in line with different application conditions in Russia and Japan.
闸调器是闸瓦间隙调整器的简称，用于调整列车制动闸瓦与轮对间的距离，是列车制动的重要部件。
Brake shoes stack adjuster is an important part of act-enable of trains and it is used to adjust the distance between Zhawa and Wheels in pair.
本文以中锰合金铸铁闸瓦为研究对象，并与中磷铸铁、高磷铸铁进行了对比研究。
Mid-Manganese alloy cast iron brake shoe was studied and compared with mid-phosphorous and high-phosphorous cast iron.
通过理论计算和1：1制动试验台试验，证明该闸瓦完全能满足东风8B内燃机车的制动要求。
According to theoretical calculation and test results in 1: 1brake test rig, it proves that the brake shoes may meet the brake needs ofDF8B diesel locomotive.
提升机闸瓦间隙大小受到轴窜、偏摆等的影响，所以其值是一个动态变化的量。
Because the brake clearance is influenced by axis moving, the swing of disk brake, its result is a variable quantity.
高摩合成闸瓦不仅是重载列车配套制动技术之一，也是提速及快运货车配套制动技术之一。
The high friction composite brake block is one of the new technologies applied to both the Heavy - haul Freight Train and the Rapid Freight Train.
本文研究了火车运行过程中获得的闸瓦图像的识别、磨耗的自动检测方法。
This paper studies the recognition of the brake image obtained when a train is running and the automatic test of brake wear.
目前，闸瓦磨损状况的检测和更换主要靠技术人员的目测完成。
Nowadays, the abrasion detection of brake is mostly completed by technicians.
耳轴组件的支承是每根臂末端的空气轴承，轴承上的闸瓦起定位作用。
The trunnion assembly is supported by air bearings at the end of each arm and is held in position by brake shoes at each bearings.
分析了国内外铁路车辆应用的合成闸瓦技术，并对地铁车辆使用的合成闸瓦特点进行探讨。
In this paper, many kinds of composition brake shoe used in railway rolling-stock worldwide are introduced for the exploration of the features of brake shoe installed in metro cars.
该闸瓦经装车试运行检验，其运行效果很好，已完全满足了铁路货车的提速要求。
The brake is tested by erecting railway freight train and testing circulation, its circulation result is very good, the request of railway freight train is full satisfied to lift speed.
本实用新型涉及一种铁路车辆闸瓦托专用铣刀，属于铣刀技术领域。
The utility model relates to a milling cutter for railway vehicle brake head, which belongs to the technical field of the milling cutter.
为提高既有线的运行速度，开发了铸铁合成闸瓦，该闸瓦利用陶瓷粒子来提高摩擦系数。
The composite brake shoe of cast iron is developed to improve the running speed on existing line. The ceramic particles are used in the brake shoe to improve the friction coefficient.
为提高既有线的运行速度，开发了铸铁合成闸瓦，该闸瓦利用陶瓷粒子来提高摩擦系数。
The composite brake shoe of cast iron is developed to improve the running speed on existing line. The ceramic particles are used in the brake shoe to improve the friction coefficient.
应用推荐