您可以在同一时间接上所有的设备或一次启动全部模拟器（或统统一起），依据程序依次连接到每一个，然后运行一个或多个测试。
You can physically attach all the devices or start up all the emulators (or both) at once, connect to each one in turn programmatically, and then run one or more tests.
结论采用本法可做为乳凝、血凝、炭凝三种间接凝集反应的模拟方法，经济有效地开出有关的免疫学教学试验。
Conclusion This method, which can be used as the simulating method of the three indirect agglutinations, is economy and efficient for experiments of immunology teaching.
基于有限差分法，对大型铝合金支架间接挤压铸造充型和凝固过程进行了数值模拟。
Numerical simulation of filling and solidification of large aluminum alloy support frame in indirect casting was conducted based on FDM.
用物理模拟方法研究隐伏地质异常地表间接显示机理，探讨隐伏线性构造在水平挤压条件下的表面特征。
The authors research the mechanism of indirected display on surface caused by buried geological anomaly at first, on the basis of physical simulated tests.
本文提出了浮法玻璃退火窑间接冷却区内传热过程的数值模拟方法。
In this paper, a simplified mathematical simulation of heat transfer in indirectly cooling zone of float glass annealing lehr was presented.
为激光间接驱动内爆的理论数值模拟和靶的优化设计提供了实验依据。
Thus, some physics information is provided for numerical simulation of laser driven indirect implosion experiments.
本文对时域近远场变换的间接频域算法和直接时域算法进行了数值模拟和分析。
The indirect frequency-domain algorithm and the direct time-domain algorithm are analyzed through numerical simulations.
用间接方法对典型数字器件的动态emp实验进行了模拟研究。
The research on simulation experiment of EMP coupling to dynamic typical digital devices is reported.
切割模拟功能减少了切割数据出错的可能，也间接验证了相贯接头数学模型的确性。
The function of simulation of the software not only can restrain the chance of mistakes of cutting data, but also can testify the veracity of the pipe joints' numerical model indirectly.
模拟频率间接估计算法的估计方差比直接估计算法的方差要小2 ~3个数量级。
The variance of the frequency estimates of indirect method is 2 ~ 3 magnitudes less than that of the direct method.
以桥梁拱脚为例，依据实验结果提出了一种模拟预应力钢索与索道壁之间接触压力等代荷载的实用的方法。
Taking an arch foot as an example, a practical met hod was proposed to simulate the contact pressure of the prestressed tendon according to the experiment.
引入横观各向同性弹性本构关系模型作为正交各向异性接触模型，实现路面结构层间接触状态的数值模拟。
Horizontal isotropic elasticity constitutive relation model is taken as orthotropic interface model and used to simulate the interface between horizons of pavement.
通过模拟实验，测出桥墩端阻力，并间接求出侧阻力。
Through simulated experiment, with tensile-pressing sensor the tip resistance of the pier is measured, and we can get the lateral resistance indirectly.
提出了可以考虑初始缝隙和切向剪切滑动的“剪切滑移模型”，可以用于模拟结构与相邻物体之间接触面的力学特性。
A model named shear slide model is presented, which can be used to simulate the mechanical property of the contact surface between the structure and its adjacent object.
就研究内容而言，包括：地区联系、中心地联系、城市等级联系、商品流联系、相互作用联系、扩散联系、模型模拟间接反映的区域联系等七个方面；
As far as content of studies, seven aspects are included: regional, central-place, urban hierarchical, commodity flow, interactive, diffusive, and model simulating linkages.
介绍了采用间接平差法进行数据处理，用模拟法进行优化设计的系统。
This article introduces a system that can process the data of control network with Indirect Adjustment method and optimize it by adopting simulation method.
模拟结果反映了颗粒间接触，烧结颈生长和气孔球化的微观过程。
The simulation results reflect the microscopic process such as grain contact, sintering neck growth and pore spheroidization.
方法：在人工唾液中体外模拟异种合金瞬间咬合接触时的回路，浸泡初记录各偶对的电位及15个瞬间接触电流值。
Methods The circuits of instantly different metallic contact were simulated in artificial saliva, and electrical potential of every couple and 15 currents of instant contact were measured.
基于FLAC3D数值分析软件，探讨了大直径长桩的数值模拟方法，分析了桩土间接触面参数对数值计算结果的影响。
The numerical simulation method based on software FLAC3D for the large-diameter long pile is discussed, and the influences of parameters of soil-pile interface on the numerical results are analyzed.
本文指出模拟方法是现代科学研究的一种重要方法，通过研究模型间接地揭示客观原型的本质和规律性。
This paper shows that the simulation method is one of the important methods in modern science. By studying the model, the essences and laws of objective protoplast arc indirectly delineated.
利用吸湿实验对模拟结果进行了间接验证。
通过数值模拟发现，电极压力和电极球面半径是影响电极-工件间接触面大小的主要因素；
The electrode-to-workpiece and workpiece-to-workpiece con tact behaviors are analyzed, and reasons for contact pressure distribution are explained.
通过数值模拟发现，电极压力和电极球面半径是影响电极-工件间接触面大小的主要因素；
The electrode-to-workpiece and workpiece-to-workpiece con tact behaviors are analyzed, and reasons for contact pressure distribution are explained.
应用推荐